Re: [PATCH v3] arm64: dts: qcom: x1e80100-dell-xps13-9345: add the front camera

[Liviu Nicoara <lnicoara@thinkoid.org>]

On Sun, 11 Oct 2026 18:28:30 +0000, Aleksandrs Vinarskis wrote:
> The initial patch for camera from Laurentiu Tudor that Abel was referring to
> was never submitted upstream, as it depends on CAMSS PHY and DT camera
> series which are trying to find their way upstream for over a year now.

Thanks for the link; I had not seen it.

> Just an FYI: CAMF_RES_QRD.bin is an AeoB file. Some time ago I made a
> repo to keep a list of already de-compiled files for other developers to use,
> might come handy.
>
> IMO this comment can be dropped.

Will drop it in v4. The dump agrees with my read of the file.

> Windows may only be switching one rail, however there in fact a 2v8 rail
> provided by LDO 7B.
>
> I would recommend to add it.

Will add vreg_l7b_2p8 and avdd-supply in v4.

One question for dvdd. The sensor's DVDD pin is 1.2 V, so a regulator
on the module or the board must step it down. On the schematic, which
rail feeds that regulator: L7B, as Tudor's patch has it, or the 1.8 V
behind GPIO 91? That decides whether dvdd-supply goes on vreg_l7b_2p8
or on vreg_cam_1p8.

Thanks,
Liviu