From: Jinseob Kim <kimjinseob88@gmail.com>
To: jic23@kernel.org, linux-iio@vger.kernel.org
Cc: kimjinseob88@gmail.com, dlechner@baylibre.com,
nuno.sa@analog.com, andy@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org,
neil.armstrong@linaro.org, andersson@kernel.org,
prabhakar.mahadev-lad.rj@bp.renesas.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
corbet@lwn.net, skhan@linuxfoundation.org, rdunlap@infradead.org,
linux-doc@vger.kernel.org
Subject: [PATCH v11 8/8] iio: osf: add IIO KUnit tests
Date: Mon, 12 Oct 2026 08:13:40 +0900 [thread overview]
Message-ID: <20261011231340.42885-9-kimjinseob88@gmail.com> (raw)
In-Reply-To: <20261011231340.42885-1-kimjinseob88@gmail.com>
Exercise active-scan packing, timestamp alignment and producer quiescence
during buffer reconfiguration and unregister. Check that a blocked OSF
push retains its active scan mask until its mode claim is released.
Use deferred actions for
workers, registered devices, temporary buffer callbacks and extra device
references so assertion aborts release resources in ownership order.
Assisted-by: LLM
Signed-off-by: Jinseob Kim <kimjinseob88@gmail.com>
---
drivers/iio/sensorhubs/osf/Kconfig | 2 +-
drivers/iio/sensorhubs/osf/Makefile | 2 +-
drivers/iio/sensorhubs/osf/osf_iio_test.c | 386 ++++++++++++++++++++++
3 files changed, 388 insertions(+), 2 deletions(-)
create mode 100644 drivers/iio/sensorhubs/osf/osf_iio_test.c
diff --git a/drivers/iio/sensorhubs/osf/Kconfig b/drivers/iio/sensorhubs/osf/Kconfig
index 316f33be1327ca85eb18920b8d610a3e983439d2..b4a2cde9645e588703fd7f3f315a6d8b6a90f9c9 100644
--- a/drivers/iio/sensorhubs/osf/Kconfig
+++ b/drivers/iio/sensorhubs/osf/Kconfig
@@ -20,7 +20,7 @@ config OPEN_SENSOR_FUSION_KUNIT_TEST
default KUNIT_ALL_TESTS
help
Build focused unit tests for the Open Sensor Fusion core sample
- acceptance, direct-read cache, and capability/session handling. The tests
+ acceptance, direct-read cache, and IIO buffer paths. The tests
exercise accepted, ignored, and rejected sample handling without
exposing additional production interfaces.
diff --git a/drivers/iio/sensorhubs/osf/Makefile b/drivers/iio/sensorhubs/osf/Makefile
index c2f5ba065a62fef2a4897034239b405ccdd69250..6a28b14cae1f358d485cea67f44df3647939a560 100644
--- a/drivers/iio/sensorhubs/osf/Makefile
+++ b/drivers/iio/sensorhubs/osf/Makefile
@@ -4,4 +4,4 @@ obj-$(CONFIG_OPEN_SENSOR_FUSION) += open-sensor-fusion.o
open-sensor-fusion-y := osf_core.o osf_iio.o osf_protocol.o osf_serdev.o \
osf_stream.o
-open-sensor-fusion-$(CONFIG_OPEN_SENSOR_FUSION_KUNIT_TEST) += osf_core_test.o
+open-sensor-fusion-$(CONFIG_OPEN_SENSOR_FUSION_KUNIT_TEST) += osf_core_test.o osf_iio_test.o
diff --git a/drivers/iio/sensorhubs/osf/osf_iio_test.c b/drivers/iio/sensorhubs/osf/osf_iio_test.c
new file mode 100644
index 0000000000000000000000000000000000000000..4c3fd8cfb2b2674bbb91a311afbab812a19db284
--- /dev/null
+++ b/drivers/iio/sensorhubs/osf/osf_iio_test.c
@@ -0,0 +1,386 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <kunit/device.h>
+#include <kunit/test.h>
+
+#include <linux/bitmap.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/buffer_impl.h>
+#include <linux/iio/iio.h>
+#include <linux/kthread.h>
+#include <linux/string.h>
+
+#include "osf_core.h"
+#include "osf_iio.h"
+
+KUNIT_DEFINE_ACTION_WRAPPER(osf_iio_test_unregister, osf_iio_unregister_sensor,
+ struct iio_dev *);
+
+KUNIT_DEFINE_ACTION_WRAPPER(osf_iio_test_put_device, put_device, struct device *);
+
+static noinline void osf_test_poison_stack(void)
+{
+ u8 bytes[1024];
+
+ memset(bytes, 0xa5, sizeof(bytes));
+ barrier_data(bytes);
+}
+
+static void osf_iio_check_scan(struct kunit *test, struct iio_dev *indio_dev,
+ const s32 *values, unsigned int channels,
+ unsigned int mask, bool ts)
+{
+ struct iio_buffer *buffer = indio_dev->buffer;
+ unsigned int data_bytes = hweight32(mask) * sizeof(s32);
+ unsigned int ts_offset = ALIGN(data_bytes, 8);
+ unsigned int scan_bytes = ts ? ts_offset + 8 : data_bytes;
+ unsigned int offset = 0;
+ u8 scan[24] __aligned(8);
+ s64 before, after, timestamp;
+ int ret;
+
+ bitmap_zero((unsigned long *)buffer->scan_mask, iio_get_masklength(indio_dev));
+ for (unsigned int i = 0; i < channels; i++)
+ if (mask & BIT(i))
+ set_bit(i, (unsigned long *)buffer->scan_mask);
+ buffer->scan_timestamp = ts;
+ ret = iio_update_buffers(indio_dev, buffer, NULL);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ kunit_info(test, "device=%s mask=%u ts=%u bytes=%u\n",
+ indio_dev->name, mask, ts, scan_bytes);
+ memset(scan, 0xa5, sizeof(scan));
+ before = iio_get_time_ns(indio_dev);
+ osf_test_poison_stack();
+ ret = osf_iio_push_sample(indio_dev, values, channels);
+ after = iio_get_time_ns(indio_dev);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+ KUNIT_EXPECT_EQ(test, buffer->bytes_per_datum, scan_bytes);
+ ret = iio_pop_from_buffer(buffer, scan);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+ if (ret)
+ goto disable;
+
+ for (unsigned int i = 0; i < channels; i++) {
+ if (!(mask & BIT(i)))
+ continue;
+ KUNIT_EXPECT_MEMEQ(test, scan + offset, &values[i], sizeof(s32));
+ offset += sizeof(s32);
+ }
+ if (ts) {
+ for (unsigned int i = data_bytes; i < ts_offset; i++)
+ KUNIT_EXPECT_EQ(test, scan[i], (u8)0);
+ memcpy(×tamp, scan + ts_offset, sizeof(timestamp));
+ KUNIT_EXPECT_GE(test, timestamp, before);
+ KUNIT_EXPECT_LE(test, timestamp, after);
+ }
+ /* Neither kfifo nor the producer may write outside the consumer stride. */
+ for (unsigned int i = scan_bytes; i < sizeof(scan); i++)
+ KUNIT_EXPECT_EQ(test, scan[i], (u8)0xa5);
+
+disable:
+ KUNIT_EXPECT_EQ(test, iio_update_buffers(indio_dev, NULL, buffer), 0);
+}
+
+/* Protect timestamp alignment holes and every supported scan layout. */
+static void osf_iio_scan_bytes_test(struct kunit *test)
+{
+ static const u16 types[] = {
+ OSF_SENSOR_ACCELEROMETER, OSF_SENSOR_GYROSCOPE,
+ OSF_SENSOR_MAGNETOMETER, OSF_SENSOR_TEMPERATURE,
+ };
+ const s32 values[] = { 101, -202, 303 };
+ struct osf_capability_entry entry = {
+ .sample_format = OSF_SAMPLE_FORMAT_S32,
+ .scale_nano = 1000000,
+ };
+ struct osf_device *osf;
+ struct device *dev;
+
+ dev = kunit_device_register(test, "osf-iio");
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, dev);
+ osf = kunit_kzalloc(test, sizeof(*osf), GFP_KERNEL);
+ KUNIT_ASSERT_NOT_NULL(test, osf);
+ osf_core_init(osf, dev);
+
+ for (unsigned int t = 0; t < ARRAY_SIZE(types); t++) {
+ unsigned int channels = t == 3 ? 1 : 3;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ entry.sensor_type = types[t];
+ entry.channel_count = channels;
+ ret = osf_iio_register_sensor(dev, &entry, osf, &indio_dev);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+ ret = kunit_add_action_or_reset(test, osf_iio_test_unregister, indio_dev);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+ for (unsigned int mask = 1; mask < BIT(channels); mask++)
+ for (unsigned int ts = 0; ts < 2; ts++)
+ osf_iio_check_scan(test, indio_dev, values, channels, mask, ts);
+ kunit_release_action(test, osf_iio_test_unregister, indio_dev);
+ }
+}
+
+struct osf_iio_race {
+ struct iio_buffer_access_funcs access;
+ const struct iio_buffer_access_funcs *original;
+ struct iio_dev *indio_dev;
+ struct kunit *test;
+ struct task_struct *producer;
+ struct task_struct *config;
+ struct completion entered;
+ struct completion release;
+ struct completion config_started;
+ struct completion config_done;
+ atomic_t block_store;
+ atomic_t stores;
+ atomic_t disabled;
+ atomic_t bad_store;
+ int enable_error;
+ int disable_error;
+ int config_result;
+ bool unregister;
+};
+
+static void osf_iio_stop_producer(void *data)
+{
+ struct osf_iio_race *race = data;
+
+ atomic_set(&race->block_store, 0);
+ complete_all(&race->release);
+ kthread_stop(race->producer);
+}
+
+static void osf_iio_stop_config(void *data)
+{
+ struct osf_iio_race *race = data;
+
+ /* Configuration may be waiting for an admitted store to finish. */
+ atomic_set(&race->block_store, 0);
+ complete_all(&race->release);
+ kthread_stop(race->config);
+}
+
+static void osf_iio_restore_access(void *data)
+{
+ struct osf_iio_race *race = data;
+
+ race->indio_dev->buffer->access = race->original;
+}
+
+static struct osf_iio_race *osf_iio_race_from_buffer(struct iio_buffer *buffer)
+{
+ return container_of(buffer->access, struct osf_iio_race, access);
+}
+
+static int osf_iio_test_store(struct iio_buffer *buffer, const void *data)
+{
+ struct osf_iio_race *race = osf_iio_race_from_buffer(buffer);
+
+ if (atomic_xchg(&race->block_store, 0)) {
+ complete(&race->entered);
+ if (!wait_for_completion_timeout(&race->release, 5 * HZ))
+ return -ETIMEDOUT;
+ }
+ if (atomic_read(&race->disabled))
+ atomic_inc(&race->bad_store);
+ atomic_inc(&race->stores);
+ return race->original->store_to(buffer, data);
+}
+
+static int osf_iio_test_enable(struct iio_buffer *buffer, struct iio_dev *indio_dev)
+{
+ struct osf_iio_race *race = osf_iio_race_from_buffer(buffer);
+
+ if (race->enable_error)
+ return race->enable_error;
+ atomic_set(&race->disabled, 0);
+ return 0;
+}
+
+static int osf_iio_test_disable(struct iio_buffer *buffer, struct iio_dev *indio_dev)
+{
+ struct osf_iio_race *race = osf_iio_race_from_buffer(buffer);
+
+ atomic_set(&race->disabled, 1);
+ return race->disable_error;
+}
+
+static int osf_iio_test_producer(void *data)
+{
+ struct osf_iio_race *race = data;
+ const s32 values[] = { 101, -202, 303 };
+
+ while (!kthread_should_stop()) {
+ osf_iio_push_sample(race->indio_dev, values, ARRAY_SIZE(values));
+ cond_resched();
+ }
+ return 0;
+}
+
+static int osf_iio_test_configure(void *data)
+{
+ struct osf_iio_race *race = data;
+
+ complete(&race->config_started);
+ if (race->unregister) {
+ /* Consume the registered cleanup action exactly once. */
+ kunit_release_action(race->test, osf_iio_test_unregister, race->indio_dev);
+ race->config_result = 0;
+ } else {
+ race->config_result = iio_update_buffers(race->indio_dev, NULL,
+ race->indio_dev->buffer);
+ }
+ complete(&race->config_done);
+ while (!kthread_should_stop())
+ msleep(20);
+ return 0;
+}
+
+static void osf_iio_expect_quiesce(struct kunit *test, struct osf_iio_race *race)
+{
+ struct iio_dev *indio_dev = race->indio_dev;
+ const unsigned long *scan_mask = indio_dev->active_scan_mask;
+ unsigned long mask;
+ unsigned long waited;
+ int ret;
+
+ KUNIT_ASSERT_NOT_NULL(test, scan_mask);
+ mask = *scan_mask;
+ race->config = kthread_run(osf_iio_test_configure, race, "osf-cfg-test");
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, race->config);
+ ret = kunit_add_action_or_reset(test, osf_iio_stop_config, race);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+ KUNIT_EXPECT_NE(test, wait_for_completion_timeout(&race->config_started, HZ), 0UL);
+ waited = wait_for_completion_timeout(&race->config_done, msecs_to_jiffies(20));
+ KUNIT_EXPECT_EQ(test, waited, 0UL);
+ /* The blocked OSF push owns the mode claim until its store returns. */
+ KUNIT_EXPECT_TRUE(test, iio_buffer_enabled(indio_dev));
+ KUNIT_EXPECT_PTR_EQ(test, indio_dev->active_scan_mask, scan_mask);
+ if (indio_dev->active_scan_mask)
+ KUNIT_EXPECT_EQ(test, *indio_dev->active_scan_mask, mask);
+ complete(&race->release);
+ kunit_release_action(test, osf_iio_stop_config, race);
+ KUNIT_EXPECT_TRUE(test, completion_done(&race->config_done));
+ KUNIT_EXPECT_EQ(test, race->config_result, 0);
+ KUNIT_EXPECT_FALSE(test, iio_buffer_enabled(indio_dev));
+ KUNIT_EXPECT_NULL(test, indio_dev->active_scan_mask);
+}
+
+/* Run real IIO configuration and kfifo code against an independent producer. */
+static void osf_iio_buffer_lifetime_test(struct kunit *test)
+{
+ struct osf_capability_entry entry = {
+ .sensor_type = OSF_SENSOR_ACCELEROMETER,
+ .channel_count = 3,
+ .sample_format = OSF_SAMPLE_FORMAT_S32,
+ .scale_nano = 1000000,
+ };
+ const s32 values[] = { 101, -202, 303 };
+ struct osf_iio_race *race;
+ struct osf_device *osf;
+ struct iio_dev *indio_dev;
+ struct iio_buffer *buffer;
+ struct device *dev;
+ int stores, ret;
+
+ dev = kunit_device_register(test, "osf-race");
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, dev);
+ osf = kunit_kzalloc(test, sizeof(*osf), GFP_KERNEL);
+ race = kunit_kzalloc(test, sizeof(*race), GFP_KERNEL);
+ KUNIT_ASSERT_NOT_NULL(test, osf);
+ KUNIT_ASSERT_NOT_NULL(test, race);
+ osf_core_init(osf, dev);
+ ret = osf_iio_register_sensor(dev, &entry, osf, &indio_dev);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+ ret = kunit_add_action_or_reset(test, osf_iio_test_unregister, indio_dev);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+ buffer = indio_dev->buffer;
+ race->indio_dev = indio_dev;
+ race->test = test;
+ race->original = buffer->access;
+ race->access = *buffer->access;
+ race->access.store_to = osf_iio_test_store;
+ race->access.enable = osf_iio_test_enable;
+ race->access.disable = osf_iio_test_disable;
+ init_completion(&race->entered);
+ init_completion(&race->release);
+ init_completion(&race->config_started);
+ init_completion(&race->config_done);
+ atomic_set(&race->disabled, 1);
+ /* Keep the device and its attached buffer alive across unregister. */
+ get_device(&indio_dev->dev);
+ ret = kunit_add_action_or_reset(test, osf_iio_test_put_device, &indio_dev->dev);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+ buffer->access = &race->access;
+ ret = kunit_add_action_or_reset(test, osf_iio_restore_access, race);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+ set_bit(0, (unsigned long *)buffer->scan_mask);
+ KUNIT_EXPECT_EQ(test, iio_update_buffers(indio_dev, buffer, NULL), 0);
+
+ atomic_set(&race->block_store, 1);
+ race->producer = kthread_run(osf_iio_test_producer, race, "osf-rx-test");
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, race->producer);
+ ret = kunit_add_action_or_reset(test, osf_iio_stop_producer, race);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+ KUNIT_EXPECT_NE(test, wait_for_completion_timeout(&race->entered, HZ), 0UL);
+ osf_iio_expect_quiesce(test, race);
+
+ for (unsigned int i = 0; i < 100; i++) {
+ bitmap_zero((unsigned long *)buffer->scan_mask, iio_get_masklength(indio_dev));
+ *(unsigned long *)buffer->scan_mask = (i % 7) + 1;
+ buffer->scan_timestamp = i & 1;
+ KUNIT_EXPECT_EQ(test, iio_update_buffers(indio_dev, buffer, NULL), 0);
+ cond_resched();
+ KUNIT_EXPECT_EQ(test, iio_update_buffers(indio_dev, NULL, buffer), 0);
+ }
+
+ race->enable_error = -EIO;
+ KUNIT_EXPECT_EQ(test, iio_update_buffers(indio_dev, buffer, NULL), -EIO);
+ stores = atomic_read(&race->stores);
+ KUNIT_EXPECT_EQ(test, osf_iio_push_sample(indio_dev, values, 3), 0);
+ KUNIT_EXPECT_EQ(test, atomic_read(&race->stores), stores);
+ race->enable_error = 0;
+ KUNIT_EXPECT_EQ(test, iio_update_buffers(indio_dev, buffer, NULL), 0);
+ race->disable_error = -EIO;
+ KUNIT_EXPECT_EQ(test, iio_update_buffers(indio_dev, NULL, buffer), -EIO);
+ stores = atomic_read(&race->stores);
+ KUNIT_EXPECT_EQ(test, osf_iio_push_sample(indio_dev, values, 3), 0);
+ KUNIT_EXPECT_EQ(test, atomic_read(&race->stores), stores);
+ race->disable_error = 0;
+
+ KUNIT_EXPECT_EQ(test, iio_update_buffers(indio_dev, buffer, NULL), 0);
+ /* Rearm only after the first blocked store and configuration have ended. */
+ reinit_completion(&race->entered);
+ reinit_completion(&race->release);
+ reinit_completion(&race->config_started);
+ reinit_completion(&race->config_done);
+ /* Publish the completions to the producer's fully ordered atomic_xchg(). */
+ atomic_set_release(&race->block_store, 1);
+ KUNIT_EXPECT_NE(test, wait_for_completion_timeout(&race->entered, HZ), 0UL);
+ race->unregister = true;
+ osf_iio_expect_quiesce(test, race);
+ kunit_release_action(test, osf_iio_stop_producer, race);
+ KUNIT_EXPECT_EQ(test, atomic_read(&race->bad_store), 0);
+ KUNIT_EXPECT_GT(test, atomic_read(&race->stores), 0);
+ kunit_release_action(test, osf_iio_restore_access, race);
+ kunit_release_action(test, osf_iio_test_put_device, &indio_dev->dev);
+}
+
+static struct kunit_case osf_iio_test_cases[] = {
+ KUNIT_CASE(osf_iio_scan_bytes_test),
+ KUNIT_CASE(osf_iio_buffer_lifetime_test),
+ { }
+};
+
+static struct kunit_suite osf_iio_test_suite = {
+ .name = "osf-iio",
+ .test_cases = osf_iio_test_cases,
+};
+
+kunit_test_suite(osf_iio_test_suite);
+
+MODULE_LICENSE("GPL");
prev parent reply other threads:[~2026-10-11 23:15 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-11 23:13 [PATCH v11 0/8] iio: add Open Sensor Fusion UART support Jinseob Kim
2026-10-11 23:13 ` [PATCH v11 1/8] dt-bindings: iio: add Open Sensor Fusion device Jinseob Kim
2026-10-11 23:13 ` [PATCH v11 2/8] Documentation: iio: add Open Sensor Fusion driver overview Jinseob Kim
2026-10-11 23:13 ` [PATCH v11 3/8] iio: osf: add protocol decoding Jinseob Kim
2026-10-11 23:13 ` [PATCH v11 4/8] iio: osf: add validated stream parser Jinseob Kim
2026-10-11 23:13 ` [PATCH v11 5/8] iio: osf: add UART transport and core receive path Jinseob Kim
2026-10-11 23:13 ` [PATCH v11 6/8] iio: osf: add IIO devices from capability reports Jinseob Kim
2026-10-11 23:13 ` [PATCH v11 7/8] iio: osf: add core KUnit tests Jinseob Kim
2026-10-11 23:13 ` Jinseob Kim [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261011231340.42885-9-kimjinseob88@gmail.com \
--to=kimjinseob88@gmail.com \
--cc=andersson@kernel.org \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=nuno.sa@analog.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=rdunlap@infradead.org \
--cc=robh@kernel.org \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®