From: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Abel Vesa <abelvesa@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Subject: [PATCH v7 02/11] arm64: dts: qcom: ipq5210: Introduce RDP504 common DT file
Date: Mon, 12 Oct 2026 12:53:02 +0530 [thread overview]
Message-ID: <20261012-08-dts-v7-2-77bd3d68d850@oss.qualcomm.com> (raw)
In-Reply-To: <20261012-08-dts-v7-0-77bd3d68d850@oss.qualcomm.com>
RDP504 has USB, PCIe and SPI NAND devices populated. EMMC and NAND
share the GPIOs. The board has to be reworked to change from EMMC
to NAND variant. Rename ipq5210-rdp504.dts as ipq5210-rdp504-common.dtsi
and include it in variant specific DTS file.
Describe the fixed USB regulators, PCIe reset GPIOs, QPIC SPI NAND flash
and required pinctrl states. Enable QPIC BAM, USB and PCIe for the board.
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
---
.../arm64/boot/dts/qcom/ipq5210-rdp504-common.dtsi | 209 +++++++++++++++++++++
arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts | 66 +------
2 files changed, 211 insertions(+), 64 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq5210-rdp504-common.dtsi b/arch/arm64/boot/dts/qcom/ipq5210-rdp504-common.dtsi
new file mode 100644
index 000000000000..30c8560822b5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5210-rdp504-common.dtsi
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "ipq5210.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ vreg_misc_3p3: regulator-usb-3p3 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-name = "usb_hs_vdda_3p3";
+ };
+
+ vreg_misc_1p8: regulator-usb-1p8 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-name = "vdda_1p8_usb";
+ };
+
+ vreg_misc_0p925: regulator-usb-0p925 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <925000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-name = "vdd_core_usb";
+ };
+};
+
+&pcie0 {
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie0_phy {
+ status = "okay";
+};
+
+&pcie0_port0 {
+ reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1 {
+ pinctrl-0 = <&pcie1_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie1_phy {
+ status = "okay";
+};
+
+&pcie1_port0 {
+ reset-gpios = <&tlmm 29 GPIO_ACTIVE_LOW>;
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&qpic_nand {
+ pinctrl-0 = <&qpic_snand_default_state>;
+ pinctrl-names = "default";
+
+ flash@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-ecc-engine = <&qpic_nand>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ };
+};
+
+&qusb_phy_0 {
+ vdd-supply = <&vreg_misc_0p925>;
+ vdda-pll-supply = <&vreg_misc_1p8>;
+ vdda-phy-dpdm-supply = <&vreg_misc_3p3>;
+
+ status = "okay";
+};
+
+&sdhc {
+ max-frequency = <192000000>;
+ bus-width = <4>;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ pinctrl-0 = <&sdhc_default_state>;
+ pinctrl-names = "default";
+};
+
+&sleep_clk {
+ clock-frequency = <32000>;
+};
+
+&ssphy_0 {
+ vdda-pll-supply = <&vreg_misc_1p8>;
+ vdda-phy-supply = <&vreg_misc_0p925>;
+
+ status = "okay";
+};
+
+&tlmm {
+ pcie1_default_state: pcie1-default-state {
+ pins = "gpio29";
+ function = "gpio";
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ pcie0_default_state: pcie0-default-state {
+ pins = "gpio32";
+ function = "gpio";
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ qpic_snand_default_state: qpic-snand-default-state {
+ data-pins {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "qspi_data";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ cs-pins {
+ pins = "gpio4";
+ function = "qspi_cs_n";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ clock-pins {
+ pins = "gpio5";
+ function = "qspi_clk";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ qup_uart1_default_state: qup-uart1-default-state {
+ pins = "gpio38", "gpio39";
+ function = "qup_se1";
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ sdhc_default_state: sdhc-default-state {
+ data-pins {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "sdc_data";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ cmd-pins {
+ pins = "gpio4";
+ function = "sdc_cmd";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ clk-pins {
+ pins = "gpio5";
+ function = "sdc_clk";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-0 = <&qup_uart1_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&usb3 {
+ dr_mode = "host";
+
+ status = "okay";
+};
+
+&xo_board {
+ clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts b/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts
index 941f866ecfe9..e5f2f9217f3b 100644
--- a/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts
@@ -5,75 +5,13 @@
/dts-v1/;
-#include "ipq5210.dtsi"
+#include "ipq5210-rdp504-common.dtsi"
/ {
- model = "Qualcomm Technologies, Inc. IPQ5210 RDP504";
+ model = "Qualcomm Technologies, Inc. IPQ5210 RDP504 (eMMC)";
compatible = "qcom,ipq5210-rdp504", "qcom,ipq5210";
-
- aliases {
- serial0 = &uart1;
- };
-
- chosen {
- stdout-path = "serial0";
- };
};
&sdhc {
- max-frequency = <192000000>;
- bus-width = <4>;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- pinctrl-0 = <&sdhc_default_state>;
- pinctrl-names = "default";
-
status = "okay";
};
-
-&sleep_clk {
- clock-frequency = <32000>;
-};
-
-&tlmm {
- qup_uart1_default_state: qup-uart1-default-state {
- pins = "gpio38", "gpio39";
- function = "qup_se1";
- drive-strength = <6>;
- bias-pull-down;
- };
-
- sdhc_default_state: sdhc-default-state {
- clk-pins {
- pins = "gpio5";
- function = "sdc_clk";
- drive-strength = <8>;
- bias-disable;
- };
-
- cmd-pins {
- pins = "gpio4";
- function = "sdc_cmd";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- data-pins {
- pins = "gpio0", "gpio1", "gpio2", "gpio3";
- function = "sdc_data";
- drive-strength = <8>;
- bias-pull-up;
- };
- };
-};
-
-&uart1 {
- pinctrl-0 = <&qup_uart1_default_state>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&xo_board {
- clock-frequency = <24000000>;
-};
--
2.34.1
next prev parent reply other threads:[~2026-10-12 7:23 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-12 7:23 [PATCH v7 00/11] Enable mutliple peripherals in IPQ5210 Varadarajan Narayanan
2026-10-12 7:23 ` [PATCH v7 01/11] arm64: dts: qcom: ipq5210: Add nodes for multiple peripherals Varadarajan Narayanan
2026-10-12 7:23 ` Varadarajan Narayanan [this message]
2026-10-12 7:23 ` [PATCH v7 03/11] arm64: dts: qcom: ipq5210: Introduce RDP504 NAND variant DT file Varadarajan Narayanan
2026-10-12 7:23 ` [PATCH v7 04/11] arm64: dts: qcom: ipq5210: Add support for WPS button Varadarajan Narayanan
2026-10-12 7:23 ` [PATCH v7 05/11] arm64: dts: qcom: ipq5210: Add C3 CPU idle state Varadarajan Narayanan
2026-10-12 7:23 ` [PATCH v7 06/11] arm64: dts: qcom: ipq5210: Add ICE support to SDHCI Varadarajan Narayanan
2026-10-12 7:23 ` [PATCH v7 07/11] arm64: dts: qcom: ipq5210: Enable download mode support Varadarajan Narayanan
2026-10-12 7:23 ` [PATCH v7 08/11] arm64: dts: qcom: ipq5210: Enable the PWM block Varadarajan Narayanan
2026-10-12 7:23 ` [PATCH v7 09/11] arm64: dts: qcom: ipq5210: Add I2C nodes Varadarajan Narayanan
2026-10-12 7:23 ` [PATCH v7 10/11] arm64: dts: qcom: ipq5210: Add SPI node definitions Varadarajan Narayanan
2026-10-12 7:23 ` [PATCH v7 11/11] arm64: dts: qcom: ipq5210: Add random number generator node Varadarajan Narayanan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261012-08-dts-v7-2-77bd3d68d850@oss.qualcomm.com \
--to=varadarajan.narayanan@oss.qualcomm.com \
--cc=abelvesa@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®