On Sat, Oct 10, 2026 at 03:52:41AM -0300, Kurt Borja wrote: > The ADS1262 and ADS1263 are 32-bit, 38.4-kSPS delta-sigma ADCs with an > integrated PGA, internal reference, excitation and burn-out current > sources for sensor biasing and diagnostics. The ADS1263 is compatible > with ADS1262, but includes a second auxiliary ADC (ADC2) to perform main > channel (ADC1) cross-checking measurements, system background > measurements, or temperature compensation of the primary sensor. > > Both parts can configure per-channel voltage reference source, > excitation current sources (IDAC), plus input and IDAC chopping for > offset and IDAC mismatch cancellation. This lets the device drive and > ratiometrically measure RTDs and other resistive sensors. > > Reviewed-by: David Lechner > Signed-off-by: Kurt Borja Previously I commented that this was probably too complex for me to do a genuine review of, but David seems happy so that's good enough for me. Since you changed the stuff I didn't like, Acked-by: Conor Dooley pw-bot: not-applicable Thanks, Conor.