From: Michal Clapinski <mclapinski@google.com>
To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org
Cc: Lukas Wunner <lukas@wunner.de>,
linux-kernel@vger.kernel.org,
David Matlack <dmatlack@google.com>,
Pasha Tatashin <pasha.tatashin@soleen.com>,
Michal Clapinski <mclapinski@google.com>
Subject: [PATCH RESEND] PCI/DOE: Poll briefly for a response before sleeping
Date: Mon, 12 Oct 2026 13:42:13 +0200 [thread overview]
Message-ID: <20261012114213.1757207-1-mclapinski@google.com> (raw)
doe_statemachine_work() waits for a response by sleeping
PCI_DOE_POLL_INTERVAL (PCI_DOE_TIMEOUT / 128) between status reads,
which is 7 ms at HZ=1000 and 4 ms at HZ=250. Exchanges are served from
the device's local mailbox logic and typically complete within tens of
microseconds, so nearly all of that sleep is wasted. Every DOE-capable
endpoint pays it once per supported feature during enumeration.
Poll with usleep_range(20, 50) for the first ~2 ms before falling back
to the jiffies-based wait. On an Intel Emerald Rapids system, time spent
in pci_device_add() for a DOE-capable endpoint drops from 41.8 ms to
14.0 ms.
Signed-off-by: Michal Clapinski <mclapinski@google.com>
---
I was asked if I can do this with interrupts instead. I don't see a way
to do that during device enumeration that won't collide with the
drivers.
---
drivers/pci/doe.c | 28 +++++++++++++++++++++++-----
1 file changed, 23 insertions(+), 5 deletions(-)
diff --git a/drivers/pci/doe.c b/drivers/pci/doe.c
index 6b5d9ba8e969..5e93d78a1a97 100644
--- a/drivers/pci/doe.c
+++ b/drivers/pci/doe.c
@@ -27,6 +27,9 @@
/* Timeout of 1 second from 6.30.2 Operation, PCI Spec r6.0 */
#define PCI_DOE_TIMEOUT HZ
#define PCI_DOE_POLL_INTERVAL (PCI_DOE_TIMEOUT / 128)
+#define PCI_DOE_POLL_FAST_MIN_US 20
+#define PCI_DOE_POLL_FAST_MAX_US 50
+#define PCI_DOE_POLL_FAST_TRIES 40
#define PCI_DOE_FLAG_CANCEL 0
#define PCI_DOE_FLAG_DEAD 1
@@ -487,7 +490,7 @@ static void doe_statemachine_work(struct work_struct *work)
int offset = doe_mb->cap_offset;
unsigned long timeout_jiffies;
u32 val;
- int rc;
+ int rc, tries = 0;
if (test_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags)) {
signal_task_complete(task, -EIO);
@@ -525,10 +528,25 @@ static void doe_statemachine_work(struct work_struct *work)
signal_task_abort(task, -EIO);
return;
}
- rc = pci_doe_wait(doe_mb, PCI_DOE_POLL_INTERVAL);
- if (rc) {
- signal_task_abort(task, rc);
- return;
+ /*
+ * Exchanges are served from the device's local mailbox
+ * logic and usually complete in tens of microseconds, far
+ * below the jiffies granularity of PCI_DOE_POLL_INTERVAL.
+ * Poll for up to ~2 ms before falling back to it.
+ */
+ if (tries++ < PCI_DOE_POLL_FAST_TRIES) {
+ if (test_bit(PCI_DOE_FLAG_CANCEL, &doe_mb->flags)) {
+ signal_task_abort(task, -EIO);
+ return;
+ }
+ usleep_range(PCI_DOE_POLL_FAST_MIN_US,
+ PCI_DOE_POLL_FAST_MAX_US);
+ } else {
+ rc = pci_doe_wait(doe_mb, PCI_DOE_POLL_INTERVAL);
+ if (rc) {
+ signal_task_abort(task, rc);
+ return;
+ }
}
goto retry_resp;
}
--
2.56.0.385.gd3acb90ef8-goog
reply other threads:[~2026-10-12 11:42 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261012114213.1757207-1-mclapinski@google.com \
--to=mclapinski@google.com \
--cc=bhelgaas@google.com \
--cc=dmatlack@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=pasha.tatashin@soleen.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®