From: Conor Dooley <conor@kernel.org>
To: soc@kernel.org
Cc: conor@kernel.org, linux-riscv@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [GIT PULL][3/4] RISC-V soc drivers for v7.4
Date: Tue, 13 Oct 2026 16:38:28 +0100 [thread overview]
Message-ID: <20261013-glitter-lingo-dce2f8d724c9@spud> (raw)
[-- Attachment #1: Type: text/plain, Size: 4334 bytes --]
Hey folks,
Diff here contains a lot of clock bindings, so I've provided an explanation
in the tag.
Thanks,
Conor.
The following changes since commit cee9395acd8043be0644b25c34bfa86623f2b935:
Linux 7.3-rc1 (2026-08-30 13:34:40 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/ riscv-soc-drivers-for-v7.4
for you to fetch changes up to 6f77194e1147d85c10b4964edee7091c701a25c2:
soc: mpfs: use kref cleanup on probe failure (2026-10-13 15:43:15 +0100)
----------------------------------------------------------------
RISC-V misc. soc drivers for v7.4
StarFive:
Syscon bindings and a socinfo driver for the JHB100. There ended up
being several clock bindings here also because the clock tree needed the
whole lot due to headers and I envisaged this being part of a three-way
shared tag between my soc driver branch, dts branch and the clock tree.
Due to timing, the dts branch didn't get this content, leading to the
slightly odd branch here.
Microchip:
A bugfix for teardown code in the mpfs system controller driver.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
----------------------------------------------------------------
Changhuang Liang (9):
dt-bindings: clock: Add StarFive JHB100 System-0 clock and reset generator
dt-bindings: clock: Add StarFive JHB100 System-1 clock and reset generator
dt-bindings: clock: Add StarFive JHB100 System-2 clock and reset generator
dt-bindings: clock: Add StarFive JHB100 Peripheral-0 clock and reset generator
dt-bindings: clock: Add StarFive JHB100 Peripheral-1 clock and reset generator
dt-bindings: clock: Add StarFive JHB100 Peripheral-2 clock and reset generator
dt-bindings: clock: Add StarFive JHB100 Peripheral-3 clock and reset generator
dt-bindings: soc: starfive: Add StarFive JHB100 syscon modules
soc: starfive: Add socinfo driver for JHB100 SoC
Guangshuo Li (1):
soc: mpfs: use kref cleanup on probe failure
.../bindings/clock/starfive,jhb100-per0crg.yaml | 70 +++
.../bindings/clock/starfive,jhb100-per1crg.yaml | 70 +++
.../bindings/clock/starfive,jhb100-per2crg.yaml | 76 +++
.../bindings/clock/starfive,jhb100-per3crg.yaml | 76 +++
.../bindings/clock/starfive,jhb100-sys0crg.yaml | 63 +++
.../bindings/clock/starfive,jhb100-sys1crg.yaml | 71 +++
.../bindings/clock/starfive,jhb100-sys2crg.yaml | 64 +++
.../soc/starfive/starfive,jhb100-syscon.yaml | 115 +++++
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/microchip/mpfs-sys-controller.c | 7 +-
drivers/soc/starfive/Kconfig | 6 +
drivers/soc/starfive/Makefile | 2 +
drivers/soc/starfive/socinfo/Kconfig | 13 +
drivers/soc/starfive/socinfo/Makefile | 2 +
drivers/soc/starfive/socinfo/jhb100-socinfo.c | 105 ++++
include/dt-bindings/clock/starfive,jhb100-crg.h | 554 +++++++++++++++++++++
include/dt-bindings/reset/starfive,jhb100-crg.h | 189 +++++++
18 files changed, 1482 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per0crg.yaml
create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per1crg.yaml
create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per2crg.yaml
create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per3crg.yaml
create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-sys0crg.yaml
create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-sys1crg.yaml
create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-sys2crg.yaml
create mode 100644 Documentation/devicetree/bindings/soc/starfive/starfive,jhb100-syscon.yaml
create mode 100644 drivers/soc/starfive/Kconfig
create mode 100644 drivers/soc/starfive/Makefile
create mode 100644 drivers/soc/starfive/socinfo/Kconfig
create mode 100644 drivers/soc/starfive/socinfo/Makefile
create mode 100644 drivers/soc/starfive/socinfo/jhb100-socinfo.c
create mode 100644 include/dt-bindings/clock/starfive,jhb100-crg.h
create mode 100644 include/dt-bindings/reset/starfive,jhb100-crg.h
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
reply other threads:[~2026-10-13 15:38 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261013-glitter-lingo-dce2f8d724c9@spud \
--to=conor@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®