mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
To: Linus Walleij <linusw@kernel.org>,
	 Bartosz Golaszewski <brgl@kernel.org>,
	Frank Li <Frank.Li@nxp.com>,
	 Sascha Hauer <s.hauer@pengutronix.de>,
	 Pengutronix Kernel Team <kernel@pengutronix.de>,
	 Fabio Estevam <festevam@gmail.com>,
	Shenwei Wang <shenwei.wang@nxp.com>,
	 Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: linux-gpio@vger.kernel.org, imx@lists.linux.dev,
	 linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,  Peng Fan <peng.fan@nxp.com>
Subject: [PATCH v7 3/4] gpio: mxc: fix wakeup_pads bit operations
Date: Tue, 13 Oct 2026 14:01:11 +0800	[thread overview]
Message-ID: <20261013-gpio-mxc-cleanup-v7-3-c4d769587d3e@nxp.com> (raw)
In-Reply-To: <20261013-gpio-mxc-cleanup-v7-0-c4d769587d3e@nxp.com>

From: Peng Fan <peng.fan@nxp.com>

gpio_set_wake_irq() can be called concurrently for different pins on
the same port. The writer-vs-writer race is the concern: two concurrent
gpio_set_wake_irq() calls for different pins on the same port both do
a non-atomic read-modify-write on the same wakeup_pads word. The old
|= and &= compile to separate load/modify/store instructions that can
interleave, losing one CPU's update.

assign_bit() uses an atomic RMW instruction, so concurrent writers to
different bits in the same word are safe.

The reader side (for_each_set_bit in noirq_suspend, wakeup_pads > 0)
runs in noirq context where no concurrent writer can execute, so
reader atomicity is not needed.

wakeup_pads is a u32, while assign_bit() operates on unsigned long
pointers. On 64-bit platforms, this causes an 8-byte read-modify-write
on a 4-byte field, corrupting the adjacent is_pad_wakeup. So change
wakeup_pads to unsigned long and reorder to avoid wasting words.

And fix the enable/disable path unconditionally sets/clears the
wakeup_pads bit even when enable_irq_wake()/disable_irq_wake() fails.
Only update the bit on success.

Fixes: f60c9eac54af ("gpio: mxc: enable pad wakeup on i.MX8x platforms")
Assisted-by: LLM
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/gpio/gpio-mxc.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 7e17d7668980..e3a80f17d041 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -72,8 +72,8 @@ struct mxc_gpio_port {
 	unsigned long both_edges;
 	struct mxc_gpio_reg_saved gpio_saved_reg;
 	bool power_off;
-	u32 wakeup_pads;
 	bool is_pad_wakeup;
+	unsigned long wakeup_pads;
 	u32 pad_type[32];
 	const struct mxc_gpio_hwdata *hwdata;
 };
@@ -331,16 +331,18 @@ static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
 			ret = enable_irq_wake(port->irq_high);
 		else
 			ret = enable_irq_wake(port->irq);
-		port->wakeup_pads |= BIT(gpio_idx);
 	} else {
 		if (port->irq_high && (gpio_idx >= 16))
 			ret = disable_irq_wake(port->irq_high);
 		else
 			ret = disable_irq_wake(port->irq);
-		port->wakeup_pads &= ~BIT(gpio_idx);
 	}
+	if (ret)
+		return ret;
 
-	return ret;
+	assign_bit(gpio_idx, &port->wakeup_pads, enable);
+
+	return 0;
 }
 
 static int mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)

-- 
2.51.0


  parent reply	other threads:[~2026-10-13  6:04 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-13  6:01 [PATCH v7 0/4] gpio: mxc: misc bug fixes Peng Fan (OSS)
2026-10-13  6:01 ` [PATCH v7 1/4] gpio: mxc: fix race between chained IRQ handler install and probe completion Peng Fan (OSS)
2026-10-13 16:51   ` Linus Walleij
2026-10-13  6:01 ` [PATCH v7 2/4] gpio: mxc: fix both_edges bit operations Peng Fan (OSS)
2026-10-13 16:52   ` Linus Walleij
2026-10-13  6:01 ` Peng Fan (OSS) [this message]
2026-10-13 10:33   ` [PATCH v7 3/4] gpio: mxc: fix wakeup_pads " Andy Shevchenko
2026-10-13  6:01 ` [PATCH v7 4/4] gpio: mxc: fix race between gpiochip registration and IRQ domain setup Peng Fan (OSS)
2026-10-13 14:29   ` Frank Li
2026-10-13 23:39   ` Linus Walleij
2026-10-13 10:35 ` [PATCH v7 0/4] gpio: mxc: misc bug fixes Andy Shevchenko
2026-10-15 12:21 ` Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261013-gpio-mxc-cleanup-v7-3-c4d769587d3e@nxp.com \
    --to=peng.fan@oss.nxp.com \
    --cc=Frank.Li@nxp.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=brgl@kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=linusw@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peng.fan@nxp.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shenwei.wang@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®