[PATCH v2] spi: ch341: handle transfers without a TX or RX buffer

[Weibin Liu <liuwb@xiaopeng.com>]

ch341_transfer_one() unconditionally copies from trans->tx_buf into the
TX packet and hands trans->rx_buf to usb_bulk_msg() for the readback.

The SPI core allows half-duplex transfers where either of the buffers
is NULL, so a transfer without TX data crashes the kernel on the memcpy
and a transfer without RX data makes usb_bulk_msg() store the received
data at address 0.

The CH341A clocks data in both directions on every transfer; there is
no mode to disable a direction. Set SPI_CONTROLLER_MUST_TX and
SPI_CONTROLLER_MUST_RX so the SPI core fills in dummy buffers for
half-duplex transfers.

Fixes: 8846739f52af ("spi: add ch341a usb2spi driver")
Cc: stable@vger.kernel.org # 6.11+
Signed-off-by: Weibin Liu <liuwb@xiaopeng.com>
---
Changes in v2:

- Set SPI_CONTROLLER_MUST_TX | SPI_CONTROLLER_MUST_RX instead of
  handling NULL buffers in the driver (Mark Brown).
---
 drivers/spi/spi-ch341.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/spi/spi-ch341.c b/drivers/spi/spi-ch341.c
index 6448a44a8..56a5caa59 100644
--- a/drivers/spi/spi-ch341.c
+++ b/drivers/spi/spi-ch341.c
@@ -189,6 +189,12 @@ static int ch341_probe(struct usb_interface *intf,
 	ctrl->transfer_one = ch341_transfer_one;
 	ctrl->set_cs = ch341_set_cs;
 	ctrl->auto_runtime_pm = false;
+	/*
+	 * The CH341A SPI_STREAM command clocks data in both directions on
+	 * every transfer, so the driver always needs a TX and an RX buffer;
+	 * let the SPI core supply dummy buffers for half-duplex transfers.
+	 */
+	ctrl->flags = SPI_CONTROLLER_MUST_TX | SPI_CONTROLLER_MUST_RX;
 
 	usb_set_intfdata(intf, ch341);
 

base-commit: 72d3fcf802c45d00b300f25b848a93c3a2bd7c7e
-- 
2.50.1