From: Paulius Zaleckas <paulius.zaleckas@gmail.com>
To: Jonathan Cameron <jic23@kernel.org>, linux-iio@vger.kernel.org
Cc: "Eddie James" <eajames@linux.ibm.com>,
"Joel Stanley" <joel@jms.id.au>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Andy Shevchenko" <andriy.shevchenko@intel.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Rupesh Majhi" <zoone.rupert@gmail.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
"Paulius Zaleckas" <paulius.zaleckas@gmail.com>,
"Conor Dooley" <conor.dooley@microchip.com>
Subject: [PATCH v2 3/6] dt-bindings: iio: pressure: infineon,dps310: Add Zilltek ZTS8032
Date: Tue, 13 Oct 2026 14:21:21 +0300 [thread overview]
Message-ID: <20261013112124.1878296-4-paulius.zaleckas@gmail.com> (raw)
In-Reply-To: <20261013112124.1878296-1-paulius.zaleckas@gmail.com>
The Zilltek ZTS8032 is register compatible with the DPS310, but has two
more pressure calibration coefficients and takes its temperature from a
different sensor by default, so it cannot use the DPS310 compatible as a
fallback.
Assisted-by: LLM
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
---
.../devicetree/bindings/iio/pressure/infineon,dps310.yaml | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
index 1912a1b0b4ba..416117dfd927 100644
--- a/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
@@ -11,12 +11,14 @@ maintainers:
description:
The DPS310 is a barometric pressure and temperature sensor with an I2C
- interface.
+ interface. The Zilltek ZTS8032 is register compatible with it, but has
+ additional calibration coefficients.
properties:
compatible:
enum:
- infineon,dps310
+ - zilltek,zts8032
reg:
maxItems: 1
--
2.55.0
next prev parent reply other threads:[~2026-10-13 11:21 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-13 11:21 [PATCH v2 0/6] iio: pressure: dps310: fix pressure overflow, add " Paulius Zaleckas
2026-10-13 11:21 ` [PATCH v2 1/6] iio: pressure: dps310: fix overflow in the pressure compensation Paulius Zaleckas
2026-10-13 11:21 ` [PATCH v2 2/6] dt-bindings: vendor-prefixes: Add ZillTek Technology Paulius Zaleckas
2026-10-13 11:21 ` Paulius Zaleckas [this message]
2026-10-13 11:21 ` [PATCH v2 4/6] iio: pressure: dps310: add per-chip data Paulius Zaleckas
2026-10-13 16:52 ` Andy Shevchenko
2026-10-13 11:21 ` [PATCH v2 5/6] iio: pressure: dps310: add an OF match table Paulius Zaleckas
2026-10-13 11:21 ` [PATCH v2 6/6] iio: pressure: dps310: add Zilltek ZTS8032 support Paulius Zaleckas
2026-10-13 16:59 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261013112124.1878296-4-paulius.zaleckas@gmail.com \
--to=paulius.zaleckas@gmail.com \
--cc=andriy.shevchenko@intel.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=conor.dooley@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=eajames@linux.ibm.com \
--cc=jic23@kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
--cc=zoone.rupert@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®