From: Eric Davis via B4 Relay <devnull+eric.davis.broadcom.com@kernel.org>
To: Jason Gunthorpe <jgg@ziepe.ca>, Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org, linux-kernel@vger.kernel.org,
Eric Davis <eric.davis@broadcom.com>
Subject: [PATCH rdma-next 04/13] RDMA/core: add the reliable unconnected queue pair type
Date: Wed, 14 Oct 2026 15:21:13 -0700 [thread overview]
Message-ID: <20261014-uet-ib-core-v1-4-a0e626117113@broadcom.com> (raw)
In-Reply-To: <20261014-uet-ib-core-v1-0-a0e626117113@broadcom.com>
From: Eric Davis <eric.davis@broadcom.com>
Add IB_QPT_RU and its userspace counterpart, together with the field
layout of a reliable unconnected queue pair number used by UET.
Such a number uses all 32 bits, unlike the 24-bit InfiniBand and RoCE
one, so exempt it from the restrack assertion that no queue pair number
sets the top byte.
Signed-off-by: Eric Davis <eric.davis@broadcom.com>
---
drivers/infiniband/core/restrack.c | 13 ++++++++++++-
include/rdma/ib_verbs.h | 1 +
include/uapi/rdma/ib_user_ioctl_verbs.h | 16 ++++++++++++++++
3 files changed, 29 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/core/restrack.c b/drivers/infiniband/core/restrack.c
index a8b838fdc7b5..ddb09b17b733 100644
--- a/drivers/infiniband/core/restrack.c
+++ b/drivers/infiniband/core/restrack.c
@@ -241,7 +241,18 @@ void rdma_restrack_add(struct rdma_restrack_entry *res)
/* Special case to ensure that LQPN points to right QP */
struct ib_qp *qp = container_of(res, struct ib_qp, res);
- WARN_ONCE(qp->qp_num >> 24 || qp->port >> 8,
+ /* An InfiniBand/RoCE QP number is 24 bits and the top byte is
+ * where the port is folded in for SMI and GSI. A reliable
+ * unconnected pair is an exception as its QP number is a
+ * full 32b wide, though of the top byte only the absolute bit
+ * may be set. An absolute number whose low bits are 0 or 1
+ * still conflicts SMI/GSI on port 128, which takes a device
+ * with both RU and MADs on that many ports.
+ */
+ WARN_ONCE(qp->port >> 8 ||
+ (qp->qp_type != IB_QPT_RU && qp->qp_num >> 24) ||
+ (qp->qp_type == IB_QPT_RU &&
+ qp->qp_num & IB_UVERBS_QPN_UET_RESERVED_MASK),
"QP number 0x%0X and port 0x%0X", qp->qp_num,
qp->port);
res->id = qp->qp_num;
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 02f3312c7cf2..8d74ed4fc581 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -1188,6 +1188,7 @@ enum ib_qp_type {
IB_QPT_RAW_PACKET = IB_UVERBS_QPT_RAW_PACKET,
IB_QPT_XRC_INI = IB_UVERBS_QPT_XRC_INI,
IB_QPT_XRC_TGT = IB_UVERBS_QPT_XRC_TGT,
+ IB_QPT_RU = IB_UVERBS_QPT_RU,
IB_QPT_MAX,
IB_QPT_DRIVER = IB_UVERBS_QPT_DRIVER,
/* Reserve a range for qp types internal to the low level driver.
diff --git a/include/uapi/rdma/ib_user_ioctl_verbs.h b/include/uapi/rdma/ib_user_ioctl_verbs.h
index ed72f48960f8..b6d46115f799 100644
--- a/include/uapi/rdma/ib_user_ioctl_verbs.h
+++ b/include/uapi/rdma/ib_user_ioctl_verbs.h
@@ -91,6 +91,7 @@ enum ib_uverbs_qp_type {
IB_UVERBS_QPT_RAW_PACKET = 8,
IB_UVERBS_QPT_XRC_INI,
IB_UVERBS_QPT_XRC_TGT,
+ IB_UVERBS_QPT_RU,
IB_UVERBS_QPT_DRIVER = 0xFF,
};
@@ -302,6 +303,21 @@ struct ib_uverbs_buffer_desc {
__aligned_u64 length;
};
+/* A UET reliable unconnected queue pair number uses all 32 bits:
+ *
+ * [ absolute 1b | reserved 7b | resource index 12b | PIDonFEP 12b ]
+ *
+ * An absolute pair is named by its number alone. A relative one is named
+ * within a job, so it must carry a job key when it is created. The reserved
+ * bits are zero.
+ */
+#define IB_UVERBS_QPN_UET_PID_ON_FEP_MASK 0x00000fff
+#define IB_UVERBS_QPN_UET_PID_ON_FEP_SHIFT 0
+#define IB_UVERBS_QPN_UET_RI_MASK 0x00fff000
+#define IB_UVERBS_QPN_UET_RI_SHIFT 12
+#define IB_UVERBS_QPN_UET_RESERVED_MASK 0x7f000000
+#define IB_UVERBS_QPN_UET_ABSOLUTE_ADDR_BIT 0x80000000
+
enum ib_uverbs_comp_cntr_entry {
IB_UVERBS_COMP_CNTR_ENTRY_COMP,
IB_UVERBS_COMP_CNTR_ENTRY_ERR,
--
2.56.0
next prev parent reply other threads:[~2026-10-14 22:21 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-14 22:21 [PATCH rdma-next 00/13] RDMA/core: Ultra Ethernet transport verbs Eric Davis via B4 Relay
2026-10-14 22:21 ` [PATCH rdma-next 01/13] RDMA/core: widen the uverbs object key Eric Davis via B4 Relay
2026-10-14 22:21 ` [PATCH rdma-next 02/13] RDMA/core: add the UET GID types Eric Davis via B4 Relay
2026-10-14 22:21 ` [PATCH rdma-next 03/13] RDMA/core: report the reliable unconnected device capabilities Eric Davis via B4 Relay
2026-10-14 22:21 ` Eric Davis via B4 Relay [this message]
2026-10-14 22:21 ` [PATCH rdma-next 05/13] RDMA/core: extended address handle attributes Eric Davis via B4 Relay
2026-10-14 22:21 ` [PATCH rdma-next 06/13] RDMA/core: query the semantics a queue pair type guarantees Eric Davis via B4 Relay
2026-10-14 22:21 ` [PATCH rdma-next 07/13] RDMA/core: job and job key objects Eric Davis via B4 Relay
2026-10-14 22:21 ` [PATCH rdma-next 08/13] RDMA/uverbs: factor out the queue pair attribute copy Eric Davis via B4 Relay
2026-10-14 22:21 ` [PATCH rdma-next 09/13] RDMA/core: create a queue pair ready to send Eric Davis via B4 Relay
2026-10-14 22:21 ` [PATCH rdma-next 10/13] RDMA/core: queue pair attributes for unconnected transports Eric Davis via B4 Relay
2026-10-14 22:21 ` [PATCH rdma-next 11/13] RDMA/core: extended memory registration Eric Davis via B4 Relay
2026-10-14 22:21 ` [PATCH rdma-next 12/13] RDMA/core: 64-bit memory keys Eric Davis via B4 Relay
2026-10-14 22:21 ` [PATCH rdma-next 13/13] RDMA/core: attach a memory region to a queue pair Eric Davis via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261014-uet-ib-core-v1-4-a0e626117113@broadcom.com \
--to=devnull+eric.davis.broadcom.com@kernel.org \
--cc=eric.davis@broadcom.com \
--cc=jgg@ziepe.ca \
--cc=leon@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®