[PATCH v2 22/24] usb: dwc3: generic-plat: Add ZTE ZX279128S

[Navid Ghahremani <ghahramani.navid@gmail.com>]

Use the generic DWC3 platform integration to enable clocks and release
resets. ZX279128S is an always-on networking gateway SoC without
system low-power sleep/suspend states, and the suspend clock is an APB
clock gating input handled alongside core clocks, making the generic
platform glue sufficient.

Signed-off-by: Navid Ghahremani <ghahramani.navid@gmail.com>
---
 drivers/usb/dwc3/Kconfig             | 2 +-
 drivers/usb/dwc3/dwc3-generic-plat.c | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 18169727a4..dd0f6d25dd 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -207,7 +207,7 @@ config USB_DWC3_GENERIC_PLAT
 	default USB_DWC3
 	help
 	  Support USB3 functionality in simple SoC integrations.
-	  Currently supports SpacemiT DWC USB3. Platforms using
+	  Currently supports SpacemiT and ZTE zx279128s DWC USB3. Platforms using
 	  dwc3-of-simple can easily switch to dwc3-generic by flattening
 	  the dwc3 child node in the device tree.
 	  Say 'Y' or 'M' here if your platform integrates DWC3 in a similar way.
diff --git a/drivers/usb/dwc3/dwc3-generic-plat.c b/drivers/usb/dwc3/dwc3-generic-plat.c
index ca69ac0eb0..aa838cf067 100644
--- a/drivers/usb/dwc3/dwc3-generic-plat.c
+++ b/drivers/usb/dwc3/dwc3-generic-plat.c
@@ -237,6 +237,7 @@ static const struct of_device_id dwc3_generic_of_match[] = {
 	{ .compatible = "fsl,ls1028a-dwc3", &fsl_ls1028_dwc3},
 	{ .compatible = "eswin,eic7700-dwc3", &eic7700_dwc3},
 	{ .compatible = "starfive,jhb100-dwc3", },
+	{ .compatible = "zte,zx279128s-dwc3", },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, dwc3_generic_of_match);
-- 
2.55.0