From: Hyunuk Son <hyunuk.son@irondevice.com>
To: broonie@kernel.org, lgirdwood@gmail.com
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
perex@perex.cz, tiwai@suse.com, kiseok.jo@irondevice.com,
linux-sound@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Hyunuk Son <hyunuk.son@irondevice.com>
Subject: [PATCH 1/2] ASoC: dt-bindings: Add Iron Device MA5311
Date: Thu, 15 Oct 2026 15:04:06 +0900 [thread overview]
Message-ID: <20261015060408.128711-2-hyunuk.son@irondevice.com> (raw)
In-Reply-To: <20261015060408.128711-1-hyunuk.son@irondevice.com>
Add a Device Tree binding for the Iron Device MA5311
audio codec.
The binding describes the properties required to identify
the codec and configure its connections to the host audio
controller.
Signed-off-by: Hyunuk Son <hyunuk.son@irondevice.com>
---
.../bindings/sound/irondevice,ma5311.yaml | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/irondevice,ma5311.yaml
diff --git a/Documentation/devicetree/bindings/sound/irondevice,ma5311.yaml b/Documentation/devicetree/bindings/sound/irondevice,ma5311.yaml
new file mode 100644
index 000000000..ae4a13c29
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/irondevice,ma5311.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/irondevice,ma5311.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Iron Device MA5311 Audio Codec
+
+maintainers:
+ - Hyunuk Son <hyunuk.son@irondevice.com>
+
+description:
+ The MA5311 is an audio device providing digital speaker amplification,
+ analog input conversion, and audio DSP functionality.
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - irondevice,ma5311
+ description:
+ Requires two I2C Channel.
+
+ reg:
+ items:
+ - description: I2C address for control registers
+ - description: I2C address for ADC registers
+
+ reg-names:
+ items:
+ - const: control
+ - const: adc
+
+ reset-gpios:
+ maxItems: 1
+ description:
+ GPIO connected to the active-low RSTN pin.
+
+ interrupts:
+ maxItems: 1
+ description:
+ Interrupt from the active-low INTN fault and thermal warning output.
+
+ '#sound-dai-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ audio-codec@3e {
+ compatible = "irondevice,ma5311";
+ reg = <0x3e>, <0x3f>;
+ #sound-dai-cells = <1>;
+ reg-names = "control", "adc";
+ };
+ };
--
2.43.0
next prev parent reply other threads:[~2026-10-15 6:04 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-15 6:04 [PATCH 0/2] ASoC: Add driver for " Hyunuk Son
2026-10-15 6:04 ` Hyunuk Son [this message]
2026-10-15 10:36 ` [PATCH 1/2] ASoC: dt-bindings: Add " Krzysztof Kozlowski
2026-10-15 15:53 ` Mark Brown
2026-10-15 6:04 ` [PATCH 2/2] ASoC: codecs: Add driver for " Hyunuk Son
2026-10-15 10:41 ` Krzysztof Kozlowski
2026-10-15 16:16 ` Mark Brown
2026-10-15 17:03 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261015060408.128711-2-hyunuk.son@irondevice.com \
--to=hyunuk.son@irondevice.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kiseok.jo@irondevice.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=robh@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®