From: Orgad Shaneh <orgads@gmail.com>
To: gregkh@linuxfoundation.org
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
lkp@intel.com, oe-kbuild-all@lists.linux.dev
Subject: [PATCH] usb: octeon-hcd: fix the kernel-doc of struct octeon_hcd
Date: Thu, 15 Oct 2026 19:40:43 +0000 [thread overview]
Message-ID: <20261015194043.1597422-1-orgads@gmail.com> (raw)
In-Reply-To: <202610151637.5srThc2q-lkp@intel.com>
The struct octeon_hcd comment opens with /** but names its members
without the @ prefix, so kernel-doc sees none of them and warns about
every member. aebbc7d63407 added sof_timer without a line at all,
which the robot reports as a new W=1 warning.
Prefix the members with @, drop "pipe", which is no longer a member,
and describe the three that were missing: periodic, nonperiodic and
sof_timer. scripts/kernel-doc -Wall reports nothing for octeon_hcd
afterwards.
Fixes: aebbc7d63407 ("usb: octeon-hcd: sleep on an hrtimer for far-off periodic transfers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202610151637.5srThc2q-lkp@intel.com/
Assisted-by: LLM
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
---
drivers/usb/host/octeon-hcd.c | 31 +++++++++++++++++--------------
1 file changed, 17 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/host/octeon-hcd.c b/drivers/usb/host/octeon-hcd.c
index 4929c6a..d6ba52b 100644
--- a/drivers/usb/host/octeon-hcd.c
+++ b/drivers/usb/host/octeon-hcd.c
@@ -348,20 +348,23 @@ struct cvmx_usb_tx_fifo {
/**
* struct octeon_hcd - the state of the USB block
*
- * lock: Serialization lock.
- * init_flags: Flags passed to initialize.
- * index: Which USB block this is for.
- * idle_hardware_channels: Bit set for every idle hardware channel.
- * usbcx_hprt: Stored port status so we don't need to read a CSR to
- * determine splits.
- * pipe_for_channel: Map channels to pipes.
- * pipe: Storage for pipes.
- * indent: Used by debug output to indent functions.
- * port_status: Last port status used for change notification.
- * idle_pipes: List of open pipes that have no transactions.
- * active_pipes: Active pipes indexed by transfer type.
- * frame_number: Increments every SOF interrupt for time keeping.
- * active_split: Points to the current active split, or NULL.
+ * @lock: Serialization lock.
+ * @init_flags: Flags passed to initialize.
+ * @index: Which USB block this is for.
+ * @idle_hardware_channels: Bit set for every idle hardware channel.
+ * @usbcx_hprt: Stored port status so we don't need to read a CSR to
+ * determine splits.
+ * @pipe_for_channel: Map channels to pipes.
+ * @indent: Used by debug output to indent functions.
+ * @port_status: Last port status used for change notification.
+ * @idle_pipes: List of open pipes that have no transactions.
+ * @active_pipes: Active pipes indexed by transfer type.
+ * @frame_number: Increments every SOF interrupt for time keeping.
+ * @active_split: Points to the current active split, or NULL.
+ * @periodic: Pending TX FIFO writes for periodic channels.
+ * @nonperiodic: Pending TX FIFO writes for non-periodic channels.
+ * @sof_timer: Polls the block when the next periodic transfer is
+ * due, so SOF interrupts can stay off until then.
*/
struct octeon_hcd {
spinlock_t lock; /* serialization lock */
--
2.53.0
prev parent reply other threads:[~2026-10-15 19:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-15 14:37 Warning: drivers/usb/host/octeon-hcd.c:381 struct member 'sof_timer' not described in 'octeon_hcd' kernel test robot
2026-10-15 19:40 ` Orgad Shaneh [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261015194043.1597422-1-orgads@gmail.com \
--to=orgads@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=lkp@intel.com \
--cc=oe-kbuild-all@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®