From: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Richard Cochran <richardcochran@gmail.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Biao Huang <biao.huang@mediatek.com>,
Maxime Chevallier <maxime.chevallier@bootlin.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Eric Dumazet <edumazet@kernel.org>,
Eric Dumazet <edumazet@kernel.org>
Cc: kernel@collabora.com, netdev@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
linux-stm32@st-md-mailman.stormreply.com,
Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Subject: [PATCH net-next v3 0/9] net/stmmac: Add Mediatek MT8189 support
Date: Fri, 16 Oct 2026 12:31:04 +0200 [thread overview]
Message-ID: <20261016-dwmac-mediatek-mt8189-v3-0-25daf2bbcf35@collabora.com> (raw)
This series adds the Ethernet support for Mediatek MT8189 SoC and its
variants (MT8371, MT8391). These SoC integrate a Gigabit Ethernet MAC
with RGMII/RMII/MII interface, with a similar design than previous SoCs
such MT8188 or MT8195.
This series is based on net-next tree (sha1: 6b3e73774815).
It has been tested on Mediatek Genio 520-EVK (MT8371) and 720-EVK
(MT8391) boards, which both integrate an Airoha AN8801R Ethernet
PHY, with hardware enablement series ([1]).
It has been also tested on Mediatek Genio 510-EVK (MT8370, variant of
MT8188) and 1200-EVK (MT8395, variant of MT8195).
[1]: https://lore.kernel.org/linux-mediatek/20260924-add-mediatek-genio-520-720-evk-v3-0-2ec5c80677d4@collabora.com/
---
Changes in v3:
- Rebased on net-next (sha1: 6b3e73774815)
- Added Reviewed-By trailers in patch 3 and 5
- Added patch 1 to fix unit in rx/tx delay property description
(Sashiko)
- Patch 2:
- Reworded patch description to add clock list details
- Removed the specific MT8189 clocks list so the axi and apb clocks
are also described for this compatible too and reworked the clock
list and number check
- Added mediatek,rmii-clk-from-mac as not allowed for MT8189 (Sashiko)
- Added patch 4 to simplify TX/RX delay handling in mt2712_set_delay,
as suggested by M. Chevallier and modified following patches
accordingly
- Fixed in patch 7 tx_rgmii_delay_stage_div null case and register value
in mt8195_fix_mac_speed (Sashiko)
- Added in patch 9 the axi and apb clocks to MT8189 clock lists
- Link to v2: https://lore.kernel.org/r/20260924-dwmac-mediatek-mt8189-v2-0-430bd74d5ef9@collabora.com
Changes in v2:
- Rebased on net-next (sha1: 528de6832b21)
- Dropped "net: stmmac: mediatek: rename MT2712 and MT8195 variant
methods" and "net: stmmac: mediatek: add support for TX deallocation
adjustment feature" patches, present in v1 (M. Chevallier)
- Patch 1:
- Removed rmii_internal clock from required clock list (A. Lunn)
- Added MT8189 stage delay divider values in "mediatek,rx-delay-ps" and
"mediatek,rx-delay-ps" property description (Sashiko)
- Updated commit description
- Added patch 2 to simplify TX/RX delay handling in mt8195_set_delay
- Added patch 3 to add RX/TX delay stage divider in platform data
- Patch 4:
- Replace MT8195_PERI_ETH_CTRL_BASE by MT8195_PERI_ETH_CTRL_OFFSET to
harmonize the variable and definition naming (A. Lunn)
- Added Reviewed-By tag
- Added patch 5 to add the TX Clock phase shift use in
RGMII and in 1G speed
- Patch 6:
- Reworded flag and define names to explicit a bit more what the
feature does
- Updated commit description
- Patch 7:
- Added the new definitions and needed fields in platform data
- Updated commit description to add the info about MT8189 RX/TX delay
stage divider and maximum values, and remove reference about
stage fine feature
- Link to v1: https://lore.kernel.org/r/20260707-dwmac-mediatek-mt8189-v1-0-17f345eaaca3@collabora.com
---
Louis-Alexis Eyraud (9):
dt-bindings: net: mediatek-dwmac: fix unit in rx/tx delay property description
dt-bindings: net: mediatek-dwmac: add support for MT8189 SoC
net: stmmac: mediatek: simplify TX/RX delay handling in mt8195_set_delay
net: stmmac: mediatek: simplify TX/RX delay handling in mt2712_set_delay
net: stmmac: mediatek: add RX/TX delay stage divider in platform data
net: stmmac: mediatek: add PERI_ETH_CTRLx register offset in platform data
net: stmmac: mediatek: use TX clock phase shift in RGMII mode with 1Gbps speed
net: stmmac: mediatek: add support for TX clock output enable feature
net: stmmac: mediatek: add support for MT8189 SoC
.../devicetree/bindings/net/mediatek-dwmac.yaml | 58 +++-
.../net/ethernet/stmicro/stmmac/dwmac-mediatek.c | 363 ++++++++++++++-------
2 files changed, 287 insertions(+), 134 deletions(-)
---
base-commit: 6b3e73774815910a39d8ca75b9ad7df963f61d50
change-id: 20260703-dwmac-mediatek-mt8189-9dafe3984951
Best regards,
--
Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
next reply other threads:[~2026-10-16 10:31 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-16 10:31 Louis-Alexis Eyraud [this message]
2026-10-16 10:31 ` [PATCH net-next v3 1/9] dt-bindings: net: mediatek-dwmac: fix unit in rx/tx delay property description Louis-Alexis Eyraud
2026-10-16 15:33 ` Andrew Lunn
2026-10-16 10:31 ` [PATCH net-next v3 2/9] dt-bindings: net: mediatek-dwmac: add support for MT8189 SoC Louis-Alexis Eyraud
2026-10-16 15:40 ` Andrew Lunn
2026-10-16 10:31 ` [PATCH net-next v3 3/9] net: stmmac: mediatek: simplify TX/RX delay handling in mt8195_set_delay Louis-Alexis Eyraud
2026-10-16 10:31 ` [PATCH net-next v3 4/9] net: stmmac: mediatek: simplify TX/RX delay handling in mt2712_set_delay Louis-Alexis Eyraud
2026-10-16 10:31 ` [PATCH net-next v3 5/9] net: stmmac: mediatek: add RX/TX delay stage divider in platform data Louis-Alexis Eyraud
2026-10-16 11:37 ` Maxime Chevallier
2026-10-16 10:31 ` [PATCH net-next v3 6/9] net: stmmac: mediatek: add PERI_ETH_CTRLx register offset " Louis-Alexis Eyraud
2026-10-16 10:31 ` [PATCH net-next v3 7/9] net: stmmac: mediatek: use TX clock phase shift in RGMII mode with 1Gbps speed Louis-Alexis Eyraud
2026-10-16 11:41 ` Maxime Chevallier
2026-10-16 15:48 ` Andrew Lunn
2026-10-16 10:31 ` [PATCH net-next v3 8/9] net: stmmac: mediatek: add support for TX clock output enable feature Louis-Alexis Eyraud
2026-10-16 10:31 ` [PATCH net-next v3 9/9] net: stmmac: mediatek: add support for MT8189 SoC Louis-Alexis Eyraud
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261016-dwmac-mediatek-mt8189-v3-0-25daf2bbcf35@collabora.com \
--to=louisalexis.eyraud@collabora.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=angelogioacchino.delregno@collabora.com \
--cc=biao.huang@mediatek.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@kernel.org \
--cc=kernel@collabora.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=matthias.bgg@gmail.com \
--cc=maxime.chevallier@bootlin.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®