mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Steven Rostedt <rostedt@kernel.org>
To: linux-kernel@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Mathieu Desnoyers <mathieu.desnoyers@efficios.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	stable@vger.kernel.org, Hao Ge <hao.ge@linux.dev>
Subject: [for-linus][PATCH 1/3] tracing: Fix crash in print_graph_function_event()
Date: Fri, 16 Oct 2026 09:32:19 -0400	[thread overview]
Message-ID: <20261016133244.620040185@kernel.org> (raw)
In-Reply-To: <20261016133218.800011513@kernel.org>

From: Hao Ge <hao.ge@linux.dev>

tracing_set_tracer() assigns the flags of the newly selected tracer
with:

	tr->current_trace_flags = t->flags ? : t->tracer->flags;

If the new tracer defines neither static flags nor default flags, like
hwlat, irqsoff or wakeup, add_tracer() has no per instance flags copy
for it, and both operands are NULL, so tr->current_trace_flags ends up
being NULL as well.

The ring buffer is not cleared when switching tracers: it is reset
inside tracer_init(), after current_trace_flags was already assigned.
If the buffer still holds function_graph entries of the previous
tracer, printing one of them dereferences the NULL pointer. This was
hit by cat trace during an ftrace stress test:

  BUG: kernel NULL pointer dereference, address: 0000000000000000
  #PF: supervisor read access in kernel mode
  RIP: 0010:print_graph_function_event+0xe/0x20
  Call Trace:
   s_show+0x4d/0x110
   seq_read_iter+0x2d4/0x490
   seq_read+0x130/0x170
   vfs_read+0xb5/0x370
   ksys_read+0x6d/0xe0
   do_syscall_64+0xbc/0x450

The snapshot buffer is not reset at all, so this can be reproduced
without a race:

  echo function_graph > /sys/kernel/tracing/current_tracer
  echo 1 > /sys/kernel/tracing/snapshot
  echo hwlat > /sys/kernel/tracing/current_tracer
  cat /sys/kernel/tracing/snapshot

Rather than teaching every user of tr->current_trace_flags about this
corner case, make sure it is never NULL: when the newly selected
tracer has no flags at all, tracing_set_tracer() falls back to a
static empty no_tracer_flags. run_tracer_selftest() can hit the same
case, so the same fallback is added there too. The existing users
already handle opts == NULL, so these tracers keep behaving as before.

Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20261015130658.221198-1-hao.ge@linux.dev
Fixes: e29aa918a928 ("tracing: Have function graph tracer define options per instance")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Hao Ge <hao.ge@linux.dev>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 kernel/trace/trace.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 3b22e70c6016..97a058623f94 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -99,6 +99,12 @@ struct tracers {
 	struct tracer_flags	*flags;
 };
 
+/*
+ * Tracers that do not define their own flags use these empty flags,
+ * as tr->current_trace_flags must never be NULL.
+ */
+static struct tracer_flags no_tracer_flags;
+
 /*
  * To prevent the comm cache from being overwritten when no
  * tracing is active, only save the comm when a trace event
@@ -1318,7 +1324,12 @@ static int run_tracer_selftest(struct tracer *type)
 	tracing_reset_online_cpus(&tr->array_buffer);
 
 	tr->current_trace = type;
-	tr->current_trace_flags = type->flags ? : type->default_flags;
+	if (type->flags)
+		tr->current_trace_flags = type->flags;
+	else if (type->default_flags)
+		tr->current_trace_flags = type->default_flags;
+	else
+		tr->current_trace_flags = &no_tracer_flags;
 
 #ifdef CONFIG_TRACER_MAX_TRACE
 	if (tracer_uses_snapshot(type)) {
@@ -5089,7 +5100,12 @@ int tracing_set_tracer(struct trace_array *tr, const char *buf)
 			return ret;
 	}
 
-	tr->current_trace_flags = t->flags ? : t->tracer->flags;
+	if (t->flags)
+		tr->current_trace_flags = t->flags;
+	else if (t->tracer->flags)
+		tr->current_trace_flags = t->tracer->flags;
+	else
+		tr->current_trace_flags = &no_tracer_flags;
 
 	if (trace->init) {
 		ret = tracer_init(trace, tr);
-- 
2.53.0

  reply	other threads:[~2026-10-16 13:32 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-16 13:32 [for-linus][PATCH 0/3] tracing: More fixes for v7.3 Steven Rostedt
2026-10-16 13:32 ` Steven Rostedt [this message]
2026-10-16 13:32 ` [for-linus][PATCH 2/3] tracing: Keep the predicate limit separate from program capacity Steven Rostedt
2026-10-16 13:32 ` [for-linus][PATCH 3/3] tracing: Check operator stack capacity before pushing Steven Rostedt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261016133244.620040185@kernel.org \
    --to=rostedt@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=hao.ge@linux.dev \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mathieu.desnoyers@efficios.com \
    --cc=mhiramat@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®