From: Nickolai Zeldovich <nickolai@csail.mit.edu>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: "Bjorn Helgaas" <bhelgaas@google.com>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
"Dan Williams" <djbw@kernel.org>,
"Thierry Reding" <treding@nvidia.com>,
"Tejun Heo" <tj@kernel.org>,
linux-kernel@vger.kernel.org,
"Nickolai Zeldovich" <nickolai@csail.mit.edu>
Subject: [PATCH v1] resource: report a devm_request_resource() conflict under the lock
Date: Fri, 16 Oct 2026 10:00:43 -0400 [thread overview]
Message-ID: <20261016140043.790048-1-nickolai@csail.mit.edu> (raw)
devm_request_resource() calls request_resource_conflict(), which takes
resource_lock, tries to insert the new resource and returns a pointer to
the conflicting resource after dropping the lock. The error message is
then formatted from that pointer: conflict->name and the %pR argument
read the name, start, end, flags and desc of a resource that nothing
pins any more. The owner of the conflicting resource may call
release_resource() and free it the moment the lock is dropped.
The conflicting resource normally belongs to another device. With two
devices whose drivers claim overlapping regions (two PCI host bridges
whose "ranges" windows overlap, two instances of a controller on the
same aperture, or a stale claim an administrator is replacing), the
following interleaving reads freed memory:
CPU 0: driver B probe CPU 1: driver A unbind
devm_request_resource(devB, root, resB)
request_resource_conflict()
write_lock(&resource_lock)
__request_resource() -> resA
write_unlock(&resource_lock)
devres_release_all(devA)
devm_resource_release()
release_resource(resA)
put_device() -> kfree(resA)
dev_err(..., resA->name, resA) use after free
Both halves are reachable from userspace on any kernel: a write to the
"unbind" file of the driver that holds the region and a write to the
"bind" file of the driver that wants it. One in-tree path is
drivers/pci/bus.c devm_request_pci_bus_resources(), called from host
bridge probe for every bridge window; the windows are the embedded
struct resource of kzalloc'ed resource_entry objects that
pci_free_resource_list() frees when the other bridge is released.
In the common case the "resource collision" message is garbled; with
the slab object poisoned (CONFIG_SLUB_DEBUG) or reused, formatting
conflict->name oopses, and KASAN reports a slab-use-after-free read in
devm_request_resource(). All of this happens in a probe that is
already failing with -EBUSY. The window is a few hundred instructions
wide and exists only when two devices actually collide, so the race
has not been observed outside of analysis.
Do the same here: take resource_lock, insert with __request_resource()
and print the diagnostic while the lock still keeps the conflicting
resource in the tree, then drop the lock. The return values and the
devres handling are unchanged.
The change was built for x86_64 and RISC-V; the resource KUnit tests
pass on both.
Found by formal verification of kernel/resource.c against the kernel
binary.
Fixes: 8d38821cbcf5 ("resources: Add device-managed request/release_resource()")
Assisted-by: LLM
Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu>
---
Notes:
The same read-after-unlock shape exists in every other caller of
request_resource_conflict() and insert_resource_conflict():
pci_claim_resource(), pci_revert_fw_address(), pci_bus_insert_busn_res(),
pci_ecam_create(), acpi_pci_root_validate_resources(),
efi_mem_reserve_iomem() and the sparc, x86, loongarch and powerpc arch
callers all format the returned pointer after the lock is gone. Those
run at boot or from PCI enumeration and live outside kernel/resource.c,
where resource_lock is not visible, so this patch only changes the
driver-facing probe() entry point that pairs with an unbind of the
other device. If a treewide answer is wanted, a request variant that
reports the conflict from under the lock (or takes a callback) would be
the shape, and devm_request_resource() would be its first user.
Testing: the resource KUnit suite (CONFIG_RESOURCE_KUNIT_TEST) was run
under QEMU before and after on x86_64 and RISC-V, 3/3 passing in all
four runs; defconfig builds for both architectures with GCC are
warning-free, and kernel/resource.o builds clean with W=1 and sparse on
both.
kernel/resource.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/kernel/resource.c b/kernel/resource.c
index e60539a55541..08bd7579cf40 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -1695,10 +1695,15 @@ int devm_request_resource(struct device *dev, struct resource *root,
*ptr = new;
- conflict = request_resource_conflict(root, new);
- if (conflict) {
+ /* Report a conflict while the lock still keeps it in the tree. */
+ write_lock(&resource_lock);
+ conflict = __request_resource(root, new);
+ if (conflict)
dev_err(dev, "resource collision: %pR conflicts with %s %pR\n",
new, conflict->name, conflict);
+ write_unlock(&resource_lock);
+
+ if (conflict) {
devres_free(ptr);
return -EBUSY;
}
base-commit: 90201351a862182bdabfc1ad1c97b1e1b6ed5931
--
2.53.0
next reply other threads:[~2026-10-16 14:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-16 14:00 Nickolai Zeldovich [this message]
2026-10-16 15:03 ` Bradley Morgan
2026-10-16 16:59 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261016140043.790048-1-nickolai@csail.mit.edu \
--to=nickolai@csail.mit.edu \
--cc=akpm@linux-foundation.org \
--cc=bhelgaas@google.com \
--cc=djbw@kernel.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tj@kernel.org \
--cc=treding@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®