From: Anusha Arun Nandi <anusha.nandi@oss.qualcomm.com>
To: bryan.odonoghue@linaro.org, andersson@kernel.org,
konradybcio@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, bod@kernel.org,
vladimir.zapolskiy@linaro.org, loic.poulain@oss.qualcomm.com,
mchehab@kernel.org
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
gjorgji.rosikopulos@oss.qualcomm.com,
jigarkumar.zala@oss.qualcomm.com,
hariram.purushothaman@oss.qualcomm.com, akapatra@quicinc.com,
linux-media@vger.kernel.org,
krzysztof.kozlowski@oss.qualcomm.com, daniel@quora.org,
konrad.dybcio@oss.qualcomm.com, christopher.obbard@linaro.org,
alex.vinarskis@gmail.com
Subject: [PATCH 0/3] arm64: dts: qcom: Add CSI2 PHY common-phy providers for SA8775P, QCS8300 and SC7280
Date: Fri, 16 Oct 2026 17:11:13 -0700 [thread overview]
Message-ID: <20261017001116.2318647-1-anusha.nandi@oss.qualcomm.com> (raw)
This series adds devicetree nodes for the generic Qualcomm MIPI CSI2
PHY driver on the three platforms whose compatibles/soc_cfg were added
by the companion "phy: qcom-mipi-csi2: Add D-PHY support for SA8775P,
QCS8300 and SC7280".
Each CSIPHY is exposed as a standalone generic-PHY provider node at
its existing register address, with its own OF graph (port@0
sensor-facing, port@1 CAMSS-facing), so that camss_detect_legacy_phy()
picks the non-legacy path once a board wires a sensor through one of
them. The camss node's own reg-names/clocks/interrupts for the
CSIPHYs are left unchanged, so boards that don't use a provider still
fall back to the legacy in-driver CSIPHY handling. All provider nodes
are added disabled by default; a board or camera overlay enables the
one(s) it actually uses.
The three patches are otherwise independent and split one-per-SoC
since each touches a different dtsi file:
- Patch 1 adds the four SA8775P CSIPHYs (csiphy0-3) as
qcom,SA8775P-csi2-phy nodes.
- Patch 2 adds the three QCS8300 CSIPHYs (csiphy0-2) as
qcom,QCS8300-csi2-phy nodes.
- Patch 3 adds the five SC7280 CSIPHYs (csiphy0-4) as
qcom,SC7280-csi2-phy nodes.
This series depends on the compatible strings and soc_cfg entries
introduced by the driver series referenced above and should be applied
on top of it.
Depends-on: https://lore.kernel.org/all/20260917-x1e-camss-csi2-phy-dtsi-v7-0-1a63eb35838b@linaro.org/
Anusha Arun Nandi (3):
arm64: dts: qcom: lemans: add CSI2 D-PHY common-phy providers
arm64: dts: qcom: monaco: add CSI2 PHY common-phy providers
arm64: dts: qcom: kodiak: add CSI2 D-PHY common-phy providers
arch/arm64/boot/dts/qcom/kodiak.dtsi | 172 +++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/lemans.dtsi | 148 ++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/monaco.dtsi | 114 +++++++++++++++++
3 files changed, 434 insertions(+)
--
base-commit: 37dc35244bd8c6be6d79a6ac591d14c660822dd1
change-id: 20260226-x1e-camss-csi2-phy-dtsi-52c85c0d4da8
Best regards,
--
Anusha Arun Nandi <anusha.nandi@oss.qualcomm.com>
--
2.34.1
next reply other threads:[~2026-10-17 0:11 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-17 0:11 Anusha Arun Nandi [this message]
2026-10-17 0:11 ` [PATCH 1/3] arm64: dts: qcom: lemans: add CSI2 D-PHY common-phy providers Anusha Arun Nandi
2026-10-17 0:11 ` [PATCH 2/3] arm64: dts: qcom: monaco: add CSI2 PHY " Anusha Arun Nandi
2026-10-17 0:11 ` [PATCH 3/3] arm64: dts: qcom: kodiak: add CSI2 D-PHY " Anusha Arun Nandi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261017001116.2318647-1-anusha.nandi@oss.qualcomm.com \
--to=anusha.nandi@oss.qualcomm.com \
--cc=akapatra@quicinc.com \
--cc=alex.vinarskis@gmail.com \
--cc=andersson@kernel.org \
--cc=bod@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=christopher.obbard@linaro.org \
--cc=conor+dt@kernel.org \
--cc=daniel@quora.org \
--cc=devicetree@vger.kernel.org \
--cc=gjorgji.rosikopulos@oss.qualcomm.com \
--cc=hariram.purushothaman@oss.qualcomm.com \
--cc=jigarkumar.zala@oss.qualcomm.com \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=loic.poulain@oss.qualcomm.com \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=vladimir.zapolskiy@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®