From: George Neacsu via B4 Relay <devnull+geocausa.gmail.com@kernel.org>
To: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Sergey Lebedev <lsa.uz@pm.me>,
German Pablo Lindo <germanpapulindez@gmail.com>,
Bryan O'Donoghue <bod@kernel.org>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
George Neacsu <geocausa@gmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Subject: [PATCH v2 1/2] dt-bindings: media: i2c: Add OmniVision OV13858
Date: Sun, 18 Oct 2026 22:10:21 +0100 [thread overview]
Message-ID: <20261018-ov13858-x1e-v2-1-cd35434cfcfe@gmail.com> (raw)
In-Reply-To: <20261018-ov13858-x1e-v2-0-cd35434cfcfe@gmail.com>
From: George Neacsu <geocausa@gmail.com>
The OV13858 is a 13 megapixel sensor with a four-lane MIPI CSI-2 D-PHY
output. So far its driver has only been probed through ACPI. The
Microsoft Surface Pro 11 with a Snapdragon X Elite uses it as the rear
camera and describes it in the device tree.
Describe the sensor input clock, three supplies, reset GPIO and
four-lane CSI-2 endpoint.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Tested-by: Sergey Lebedev <lsa.uz@pm.me> # Surface Pro 11 (Intel)
Assisted-by: Claude:claude-opus-5-5
Assisted-by: ChatGPT:gpt-5.6-sol
Signed-off-by: George Neacsu <geocausa@gmail.com>
---
.../bindings/media/i2c/ovti,ov13858.yaml | 113 +++++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 114 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov13858.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov13858.yaml
new file mode 100644
index 0000000000..62bfb27782
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov13858.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov13858.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV13858 CMOS Sensor
+
+maintainers:
+ - George Neacsu <geocausa@gmail.com>
+
+description:
+ The OmniVision OV13858 is a 13 megapixel CMOS image sensor with an I2C
+ control interface. It outputs 10-bit Bayer data over a four-lane MIPI
+ CSI-2 D-PHY interface.
+
+allOf:
+ - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+ compatible:
+ const: ovti,ov13858
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: Input clock.
+ maxItems: 1
+
+ avdd-supply:
+ description: Analogue circuit voltage supply.
+
+ dovdd-supply:
+ description: I/O circuit voltage supply.
+
+ dvdd-supply:
+ description: Digital circuit voltage supply.
+
+ reset-gpios:
+ description: Active low GPIO connected to the XSHUTDN pad of the sensor.
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ required:
+ - data-lanes
+ - link-frequencies
+
+ required:
+ - endpoint
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - avdd-supply
+ - dovdd-supply
+ - dvdd-supply
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@10 {
+ compatible = "ovti,ov13858";
+ reg = <0x10>;
+
+ clocks = <&cam_mclk>;
+ assigned-clocks = <&cam_mclk>;
+ assigned-clock-rates = <19200000>;
+
+ avdd-supply = <&vreg_cam_2p8>;
+ dovdd-supply = <&vreg_cam_1p8>;
+ dvdd-supply = <&vreg_cam_1p2>;
+
+ reset-gpios = <&tlmm 110 GPIO_ACTIVE_LOW>;
+
+ orientation = <1>;
+ rotation = <0>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&csiphy1_ep>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <540000000 270000000>;
+ };
+ };
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 760791e363..d4348a56a9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20235,6 +20235,7 @@ M: Sakari Ailus <sakari.ailus@linux.intel.com>
L: linux-media@vger.kernel.org
S: Maintained
T: git git://linuxtv.org/media.git
+F: Documentation/devicetree/bindings/media/i2c/ovti,ov13858.yaml
F: drivers/media/i2c/ov13858.c
OMNIVISION OV13B10 SENSOR DRIVER
--
2.53.0
next prev parent reply other threads:[~2026-10-18 21:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-18 21:10 [PATCH v2 0/2] media: ov13858: device tree support for the Surface Pro 11 (Snapdragon) George Neacsu via B4 Relay
2026-10-18 21:10 ` George Neacsu via B4 Relay [this message]
2026-10-18 21:10 ` [PATCH v2 2/2] media: i2c: ov13858: Add device tree support George Neacsu via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261018-ov13858-x1e-v2-1-cd35434cfcfe@gmail.com \
--to=devnull+geocausa.gmail.com@kernel.org \
--cc=bod@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geocausa@gmail.com \
--cc=germanpapulindez@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=lsa.uz@pm.me \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®