[PATCH] soc: qcom: icc-bwmon: drop the bandwidth vote across system suspend

["Ramón Jesús Miranda" <ramonjesusmiranda@gmail.com>]

icc-bwmon has no PM ops: the interconnect vote derived from the last
sample stays in place while the system is suspended. On X1E80100 the CPU
bwmon was left voting 800 MB/s peak on the DDR path during s2idle, which
keeps DDR out of its low power modes (the qcom_stats "ddr" counter never
advances).

Disable the monitor, drop the OPP vote on suspend and restart monitoring
on resume. With this change DDR reaches its low power mode for >99% of
s2idle on a Microsoft Surface Pro 11 (X1E80100).

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Ramón Jesús Miranda <ramonjesusmiranda@gmail.com>
---
diff --git a/drivers/soc/qcom/icc-bwmon.c b/drivers/soc/qcom/icc-bwmon.c
--- a/drivers/soc/qcom/icc-bwmon.c
+++ b/drivers/soc/qcom/icc-bwmon.c
@@ -815,6 +815,35 @@
 	free_irq(bwmon->irq, bwmon);
 }
 
+/*
+ * The bandwidth vote of the last sample stays in place across system
+ * suspend and keeps DDR out of its low power modes. Drop it while
+ * suspended and restart monitoring on resume.
+ */
+static int bwmon_suspend(struct device *dev)
+{
+	struct icc_bwmon *bwmon = dev_get_drvdata(dev);
+
+	disable_irq(bwmon->irq);
+	bwmon_disable(bwmon);
+	dev_pm_opp_set_opp(dev, NULL);
+	bwmon->current_kbps = 0;
+
+	return 0;
+}
+
+static int bwmon_resume(struct device *dev)
+{
+	struct icc_bwmon *bwmon = dev_get_drvdata(dev);
+
+	bwmon_start(bwmon);
+	enable_irq(bwmon->irq);
+
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(bwmon_pm_ops, bwmon_suspend, bwmon_resume);
+
 static const struct icc_bwmon_data msm8998_bwmon_data = {
 	.sample_ms = 4,
 	.count_unit_kb = 1024,
@@ -879,6 +907,7 @@
 	.driver = {
 		.name = "qcom-bwmon",
 		.of_match_table = bwmon_of_match,
+		.pm = pm_sleep_ptr(&bwmon_pm_ops),
 	},
 };
 module_platform_driver(bwmon_driver);