mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Dixit Parmar <dixitparmar19@gmail.com>
Cc: "Viral Patel" <viral8854@gmail.com>,
	"David Lechner" <dlechner@baylibre.com>,
	"Nuno Sá" <nuno.sa@analog.com>,
	"Andy Shevchenko" <andy@kernel.org>,
	"linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] iio: magnetometer: tlv493d: fix magnetic field scale
Date: Sun, 18 Oct 2026 19:00:13 +0100	[thread overview]
Message-ID: <20261018190013.02036a0b@jic23-hlaptop> (raw)
In-Reply-To: <CAFmh=S2mXJLk=V_r_eie3=zDfXXRX+aUba=Kn+5h3PQ9pkwxnQ@mail.gmail.com>

On Sun, 18 Oct 2026 21:29:49 +0530
Dixit Parmar <dixitparmar19@gmail.com> wrote:

> LGTM. Good catch. There seem to be miscalculated Gauss scale due to
> multiple conversion factor.
> 
> Reviewed-by: Dixit Parmar <dixitparmar19@gmail.com>
> 
Thanks for the fast response!

Applied to the fixes-togreg branch of iio.git and marked for stable.

Thanks,

Jonathan

> On Sun, Oct 18, 2026 at 9:22 PM Dixit Parmar <dixitparmar19@gmail.com> wrote:
> >
> > This change looks correct, the Gauss scale value seem to be miscalculated due to multiple conversations and different reference. Good catch.
> >
> > On Sunday, October 18, 2026, Jonathan Cameron <jic23@kernel.org> wrote:  
> >>
> >> On Wed, 14 Oct 2026 23:07:36 +0530
> >> Viral Patel <viral8854@gmail.com> wrote:
> >>  
> >> > The TLV493D-A1B6 datasheet specifies a magnetic resolution of
> >> > 98 uT/LSB (0.098 mT/LSB). IIO reports magnetic field in Gauss
> >> > (1 mT = 10 G), so the scale should be 0.98 G/LSB.
> >> >
> >> > The driver currently reports 98/1000 = 0.098 G/LSB, which
> >> > under-reports the magnetic field by a factor of 10. The comment
> >> > also gives the resolution as 0.0098 mT (9.8 uT), mixing up units.
> >> >
> >> > Correct the scale value and the comment.
> >> >
> >> > Fixes: 106511d280c7 ("iio: magnetometer: add support for Infineon TLV493D 3D Magentic sensor")
> >> > Signed-off-by: Viral Patel <viral8854@gmail.com>  
> >>
> >> I'll give some time for Dixit to take a look at this.
> >>
> >> Thanks,
> >>
> >> Jonathan
> >>  
> >> > ---
> >> > Found while comparing this driver against the TLE493D-W2B6 register
> >> > map for a new driver I am working on. Compile-tested only; I do not
> >> > have TLV493D-A1B6 hardware.
> >> > ---
> >> >  drivers/iio/magnetometer/tlv493d.c | 6 +++---
> >> >  1 file changed, 3 insertions(+), 3 deletions(-)
> >> >
> >> > diff --git a/drivers/iio/magnetometer/tlv493d.c b/drivers/iio/magnetometer/tlv493d.c
> >> > index 03415cc2c9b3..234e3ce63ff7 100644
> >> > --- a/drivers/iio/magnetometer/tlv493d.c
> >> > +++ b/drivers/iio/magnetometer/tlv493d.c
> >> > @@ -299,11 +299,11 @@ static int tlv493d_read_raw(struct iio_dev *indio_dev,
> >> >               switch (chan->type) {
> >> >               case IIO_MAGN:
> >> >                       /*
> >> > -                      * Magnetic field scale: 0.0098 mTesla (i.e. 9.8 µT)
> >> > -                      * Magnetic field in Gauss: mT * 10 = 0.098.
> >> > +                      * Magnetic field scale: 0.098 mTesla (i.e. 98 µT) per LSB.
> >> > +                      * In Gauss (1 mT = 10 G): 0.98 G per LSB.
> >> >                        */
> >> >                       *val = 98;
> >> > -                     *val2 = 1000;
> >> > +                     *val2 = 100;
> >> >                       return IIO_VAL_FRACTIONAL;
> >> >               case IIO_TEMP:
> >> >                       /*
> >> >
> >> > ---
> >> > base-commit: ceb05f22e5cdc3f8bd3f7d5dcfc57843942191dd
> >> > change-id: 20261014-tlv493d-scale-fix-5a0b83b52d2a
> >> >
> >> > Best regards,  
> >>  
> 


      reply	other threads:[~2026-10-18 18:00 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-14 17:37 Viral Patel
2026-10-15  9:07 ` Joshua Crofts
2026-10-17 22:09 ` Jonathan Cameron
     [not found]   ` <CAFmh=S2O7TzFEe5WqH+Te9dQOK5TwAtjB-7GC7uDj7LGS9=w_Q@mail.gmail.com>
2026-10-18 15:59     ` Dixit Parmar
2026-10-18 18:00       ` Jonathan Cameron [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261018190013.02036a0b@jic23-hlaptop \
    --to=jic23@kernel.org \
    --cc=andy@kernel.org \
    --cc=dixitparmar19@gmail.com \
    --cc=dlechner@baylibre.com \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nuno.sa@analog.com \
    --cc=viral8854@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®