From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mta0.migadu.com (out-147.mta0.migadu.com [91.218.175.147]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 0CC9B346AED for ; Sun, 18 Oct 2026 21:17:08 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=91.218.175.147 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1792358239; cv=none; b=SMDoOZSqouJF3lQJO15I2SePCHho9OTAN0anoZudkzS9arIQDEAr6T+CKsykuy+0M0/R18OFwQNndyDM8izB1ZciNOrFwWH1EH/nsxRsJIxpmRMQCaVneRutAceN+miMJclZ5X5vwQc2xZSJHcjLWGBvTBU/mKjpz3wWvq7+4po= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1792358239; c=relaxed/simple; bh=a1UBWGn6m1gX1NiesussqJkkW9IX1WcMQZD5sRndFt4=; h=From:To:Cc:Subject:Date:Message-ID:MIME-Version; b=iOHiA98l/3rIv5McvabFBjylwBnDXPxqwDz5fAx6HprzZpry/z+H5NsbuxVm9MkFLP/+2libcM4Gu2NvPuECJwn6YV7OK4D9ZepT2VOqPfc4Z8YjxXkzVK4A3V+Fbw3bQilM4OQ/ruueeaJeFPh9ssYtcAf0U+2oJV9h7ySXY9E= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=packett.cool; spf=pass smtp.mailfrom=packett.cool; dkim=pass (2048-bit key) header.d=packett.cool header.i=@packett.cool header.b=Z8BUzkcc; arc=none smtp.client-ip=91.218.175.147 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=packett.cool Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=packett.cool Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=packett.cool header.i=@packett.cool header.b="Z8BUzkcc" X-Envelope-To: linux-kernel@vger.kernel.org DKIM-Signature: a=rsa-sha256; bh=a1UBWGn6m1gX1NiesussqJkkW9IX1WcMQZD5sRndFt4=; c=simple/simple; d=packett.cool; h=from:to:subject:date:message-id:mime-version:content-type; s=key1; t=1792358226; v=1; x=1792963026; b=Z8BUzkcconr+dxjHWkRg98K0PXJ11ll9lJpK8bGqNZJdqlbId9g4XLlOhTA0iihKHfrYlkbD vgm/6SI6w1P5UizFyi5otpkyS5uB3LjdCz3SnT4QJ6pp9vD88+2WZmMD8JhSA/f7v9ScYU9uy9q 5wLzu+x0oH1W9L48A2oFX3ioHdwmr05FIi9WSom0zssR1C/GCtP1eSnG8xE+AfvD5h9yFGgZo/r vzaT6xjSXV9s31Iz9hwdqd7pft2jPCnoa9+JDJD9ZGBHN0CPQkfpRrxHWA6APHKHTy/mGDgq3ra T48dcUOqYmB9uAYhgB5sbujhGtY0yeoFJxy54+UnbUeLQ== X-Envelope-To: linux-kernel@vger.kernel.org Received: by smtp.migadu.com with ESMTPS id 231001652fd7665c; Sun, 18 Oct 2026 21:17:06 +0000 X-Mizu-Trace-ID: 231001652fd7665c X-Migadu-Flow: FLOW_OUT From: Val Packett To: Bjorn Andersson , Konrad Dybcio , Abel Vesa , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Kees Cook , Tony Luck , "Guilherme G. Piccoli" Cc: Val Packett , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH] arm64: dts: qcom: sm7325: Remove duplicate motorola-dubai dts Date: Sun, 18 Oct 2026 18:16:21 -0300 Message-ID: <20261018211638.1137923-1-val@packett.cool> X-Mailer: git-send-email 2.55.0 Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Both v2 and v3 of the patch series landed, so the non-split dts is present alongside the common dtsi + split per display panel dts. Remove the redundant non-split dts. Signed-off-by: Val Packett --- arch/arm64/boot/dts/qcom/Makefile | 1 - .../boot/dts/qcom/sm7325-motorola-dubai.dts | 1453 ----------------- 2 files changed, 1454 deletions(-) delete mode 100644 arch/arm64/boot/dts/qcom/sm7325-motorola-dubai.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 88230c4e00ea..20108bc2c231 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -397,7 +397,6 @@ dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-curtana.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-joyeuse.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb -dtb-$(CONFIG_ARCH_QCOM) += sm7325-motorola-dubai.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7325-motorola-dubai-csot.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7325-motorola-dubai-tianma.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7325-nothing-spacewar.dtb diff --git a/arch/arm64/boot/dts/qcom/sm7325-motorola-dubai.dts b/arch/arm64/boot/dts/qcom/sm7325-motorola-dubai.dts deleted file mode 100644 index d94571c05a59..000000000000 --- a/arch/arm64/boot/dts/qcom/sm7325-motorola-dubai.dts +++ /dev/null @@ -1,1453 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (c) 2026, Val Packett - */ - -/dts-v1/; - -/* PM7250B is configured to use SID8/9 */ -#define PM7250B_SID 8 -#define PM7250B_SID1 9 - -#include -#include -#include -#include -#include -#include -#include - -#include "sm7325.dtsi" -#include "pm7325.dtsi" -#include "pm7250b.dtsi" -#include "pm8350c.dtsi" /* PM7350C */ -#include "pmk8350.dtsi" /* PMK7325 */ - -/ { - model = "Motorola Edge 30"; - compatible = "motorola,dubai", "qcom,sm7325"; - chassis-type = "handset"; - - aliases { - bluetooth0 = &bluetooth; - serial0 = &uart5; - serial1 = &uart7; - wifi0 = &wifi; - }; - - chosen { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - stdout-path = "serial0:115200n8"; - - framebuffer { - compatible = "simple-framebuffer"; - memory-region = <&framebuffer_mem>; - width = <1080>; - height = <2400>; - stride = <(1080 * 4)>; - format = "a8r8g8b8"; - - clocks = <&gcc GCC_DISP_HF_AXI_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_BYTE0_CLK>, - <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, - <&dispcc DISP_CC_MDSS_PCLK0_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&kypd_vol_up_n>; - pinctrl-names = "default"; - - key-volume-up { - label = "Volume Up"; - gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - pmic-glink { - compatible = "qcom,sm7325-pmic-glink", - "qcom,qcm6490-pmic-glink", - "qcom,pmic-glink"; - - #address-cells = <1>; - #size-cells = <0>; - - orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>; - - connector@0 { - compatible = "usb-c-connector"; - reg = <0>; - - power-role = "dual"; - data-role = "dual"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - pmic_glink_hs_in: endpoint { - remote-endpoint = <&usb_1_dwc3_hs>; - }; - }; - - port@2 { - reg = <2>; - - pmic_glink_sbu: endpoint { - remote-endpoint = <&fsa4480_sbu_mux>; - }; - }; - }; - }; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - ramoops@ae000000 { - compatible = "ramoops"; - reg = <0x0 0xae000000 0x0 0xc0000>; - console-size = <0x40000>; - mem-type = <2>; - pmsg-size = <0x40000>; - record-size = <0x3f800>; - }; - - removed@c0000000 { - reg = <0x0 0xc0000000 0x0 0x5100000>; - no-map; - }; - - framebuffer_mem: framebuffer@e1000000 { - reg = <0x0 0xe1000000 0x0 (1080 * 2400 * 4)>; - no-map; - }; - - linux,cma { - compatible = "shared-dma-pool"; - size = <0x0 0x8000000>; - reusable; - linux,cma-default; - }; - }; - - thermal-zones { - cam-flash-thermal { - thermal-sensors = <&pmk8350_adc_tm 2>; - - trips { - active-config0 { - temperature = <125000>; - hysteresis = <1000>; - type = "passive"; - }; - }; - }; - - chg-skin-thermal { - thermal-sensors = <&pm7250b_adc_tm 0>; - - trips { - active-config0 { - temperature = <125000>; - hysteresis = <1000>; - type = "passive"; - }; - }; - }; - - chg-thermal { - thermal-sensors = <&pmk8350_adc_tm 4>; - - trips { - active-config0 { - temperature = <125000>; - hysteresis = <1000>; - type = "passive"; - }; - }; - }; - - conn-thermal { - thermal-sensors = <&pm7250b_adc_tm 1>; - - trips { - active-config0 { - temperature = <125000>; - hysteresis = <1000>; - type = "passive"; - }; - }; - }; - - pa-1-thermal { - thermal-sensors = <&pmk8350_adc_tm 5>; - - trips { - active-config0 { - temperature = <125000>; - hysteresis = <1000>; - type = "passive"; - }; - }; - }; - - pa-2-thermal { - thermal-sensors = <&pmk8350_adc_tm 6>; - - /* Reports negative temperature. */ - status = "disabled"; - - trips { - active-config0 { - temperature = <125000>; - hysteresis = <1000>; - type = "passive"; - }; - }; - }; - - quiet-thermal { - thermal-sensors = <&pmk8350_adc_tm 1>; - - trips { - active-config0 { - temperature = <125000>; - hysteresis = <1000>; - type = "passive"; - }; - }; - }; - - sdm-skin-thermal { - thermal-sensors = <&pmk8350_adc_tm 3>; - - trips { - active-config0 { - temperature = <125000>; - hysteresis = <1000>; - type = "passive"; - }; - }; - }; - - xo-thermal { - thermal-sensors = <&pmk8350_adc_tm 0>; - - trips { - active-config0 { - temperature = <125000>; - hysteresis = <1000>; - type = "passive"; - }; - }; - }; - }; - - // S2B is really ebi.lvl but it's there for supply map completeness sake. - vreg_s2b_0p7: smpb2-regulator { - compatible = "regulator-fixed"; - regulator-name = "vreg_s2b_0p7"; - - regulator-min-microvolt = <65535>; - regulator-max-microvolt = <65535>; - regulator-always-on; - vin-supply = <&vph_pwr>; - }; - - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - }; - - wcn6750-pmu { - compatible = "qcom,wcn6750-pmu"; - pinctrl-0 = <&bt_en>; - pinctrl-names = "default"; - vddaon-supply = <&mos_0p95_aon_s10c>; - vddasd-supply = <&vreg_l11c_2p8>; - vddpmu-supply = <&mos_0p95_dig_s10c>; - vddio-supply = <&vdd18_io>; - vddrfa0p8-supply = <&vdd09_pmu_rfa_i>; - vddrfa1p2-supply = <&vdd13_pmu_rfa_i>; - vddrfa1p7-supply = <&vdd19_pmu_rfa_i>; - vddrfa2p2-supply = <&vdd22_wlpa_s1c>; - - bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; - - regulators { - vreg_pmu_rfa_cmn: ldo0 { - regulator-name = "vreg_pmu_rfa_cmn"; - }; - - vreg_pmu_aon_0p59: ldo1 { - regulator-name = "vreg_pmu_aon_0p59"; - }; - - vreg_pmu_wlcx_0p8: ldo2 { - regulator-name = "vreg_pmu_wlcx_0p8"; - }; - - vreg_pmu_wlmx_0p85: ldo3 { - regulator-name = "vreg_pmu_wlmx_0p85"; - }; - - vreg_pmu_btcmx_0p85: ldo4 { - regulator-name = "vreg_pmu_btcmx_0p85"; - }; - - vreg_pmu_rfa_0p8: ldo5 { - regulator-name = "vreg_pmu_rfa_0p8"; - }; - - vreg_pmu_rfa_1p2: ldo6 { - regulator-name = "vreg_pmu_rfa_1p2"; - }; - - vreg_pmu_rfa_1p7: ldo7 { - regulator-name = "vreg_pmu_rfa_1p7"; - }; - - vreg_pmu_pcie_0p9: ldo8 { - regulator-name = "vreg_pmu_pcie_0p9"; - }; - - vreg_pmu_pcie_1p8: ldo9 { - regulator-name = "vreg_pmu_pcie_1p8"; - }; - }; - }; -}; - -&apps_rsc { - regulators-0 { - compatible = "qcom,pm7325-rpmh-regulators"; - qcom,pmic-id = "b"; - - vdd-s1-supply = <&vph_pwr>; - vdd-s2-supply = <&vph_pwr>; - vdd-s7-supply = <&vph_pwr>; - vdd-s8-supply = <&vph_pwr>; - - vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p952>; - vdd-l2-l7-supply = <&vreg_bob>; - vdd-l3-supply = <&vreg_s2b_0p7>; - vdd-l5-supply = <&vreg_s2b_0p7>; - vdd-l6-l9-l10-supply = <&vreg_s8b_1p256>; - vdd-l8-supply = <&vreg_s7b_0p952>; - vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p856>; - vdd-l13-supply = <&vreg_s7b_0p952>; - vdd-l14-l16-supply = <&vreg_s8b_1p256>; - - /* - * S2, L4-L5 are ARCs: - * S2 - ebi.lvl, - * L4 - lmx.lvl, - * l5 - lcx.lvl. - * - * L10 are unused. - */ - - vdd19_pmu_rfa_i: - vreg_s1b_1p856: smps1 { - regulator-name = "vreg_s1b_1p856"; - regulator-min-microvolt = <1840000>; - regulator-max-microvolt = <2040000>; - }; - - mos_0p95_aon_s10c: - mos_0p95_dig_s10c: - vdd09_pmu_rfa_i: - vreg_s7b_0p952: smps7 { - regulator-name = "vreg_s7b_0p952"; - regulator-min-microvolt = <535000>; - regulator-max-microvolt = <1120000>; - }; - - vdd13_pmu_rfa_i: - vreg_s8b_1p256: smps8 { - regulator-name = "vreg_s8b_1p256"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1500000>; - regulator-initial-mode = ; - }; - - vreg_l1b_0p912: ldo1 { - regulator-name = "vreg_l1b_0p912"; - regulator-min-microvolt = <825000>; - regulator-max-microvolt = <925000>; - regulator-initial-mode = ; - }; - - vdd_a_usbhs_3p1: - vreg_l2b_3p072: ldo2 { - regulator-name = "vreg_l2b_3p072"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = ; - }; - - vreg_l3b_0p6: ldo3 { - regulator-name = "vreg_l3b_0p6"; - regulator-min-microvolt = <312000>; - regulator-max-microvolt = <910000>; - regulator-initial-mode = ; - }; - - vdd_a_dsi_0_1p2: - vdd_a_ufs_0_1p2: - vreg_l6b_1p2: ldo6 { - regulator-name = "vreg_l6b_1p2"; - regulator-min-microvolt = <1140000>; - regulator-max-microvolt = <1260000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l7b_2p96: ldo7 { - regulator-name = "vreg_l7b_2p96"; - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l8b_0p904: ldo8 { - regulator-name = "vreg_l8b_0p904"; - regulator-min-microvolt = <870000>; - regulator-max-microvolt = <970000>; - regulator-initial-mode = ; - }; - - vreg_l9b_1p2: ldo9 { - regulator-name = "vreg_l9b_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1304000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l11b_1p776: ldo11 { - regulator-name = "vreg_l11b_1p776"; - regulator-min-microvolt = <1504000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = ; - }; - - vreg_l12b_0p8: ldo12 { - regulator-name = "vreg_l12b_0p8"; - regulator-min-microvolt = <751000>; - regulator-max-microvolt = <824000>; - regulator-initial-mode = ; - }; - - vreg_l13b_0p8: ldo13 { - regulator-name = "vreg_l13b_0p8"; - regulator-min-microvolt = <530000>; - regulator-max-microvolt = <824000>; - regulator-initial-mode = ; - }; - - vreg_l14b_1p2: ldo14 { - regulator-name = "vreg_l14b_1p2"; - regulator-min-microvolt = <1080000>; - regulator-max-microvolt = <1304000>; - regulator-initial-mode = ; - }; - - vreg_l15b_0p88: ldo15 { - regulator-name = "vreg_l15b_0p88"; - regulator-min-microvolt = <765000>; - regulator-max-microvolt = <1020000>; - regulator-initial-mode = ; - }; - - vreg_l16b_1p2: ldo16 { - regulator-name = "vreg_l16b_1p2"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; - regulator-initial-mode = ; - }; - - vreg_l17b_1p8: ldo17 { - regulator-name = "vreg_l17b_1p8"; - regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <1900000>; - regulator-initial-mode = ; - }; - - vreg_l18b_1p8: ldo18 { - regulator-name = "vreg_l18b_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = ; - regulator-always-on; - regulator-boot-on; - }; - - vdd18_io: - vreg_l19b_1p8: ldo19 { - regulator-name = "vreg_l19b_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = ; - }; - }; - - regulators-1 { - compatible = "qcom,pm8350c-rpmh-regulators"; - qcom,pmic-id = "c"; - - vdd-s1-supply = <&vph_pwr>; - vdd-s2-supply = <&vph_pwr>; - vdd-s5-supply = <&vph_pwr>; - vdd-s7-supply = <&vph_pwr>; - vdd-s9-supply = <&vph_pwr>; - vdd-s10-supply = <&vph_pwr>; - - vdd-l1-l12-supply = <&vreg_s1b_1p856>; - vdd-l2-l8-supply = <&vreg_s1b_1p856>; - vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; - vdd-l6-l9-l11-supply = <&vreg_bob>; - vdd-l10-supply = <&vreg_s7b_0p952>; - - vdd-bob-supply = <&vph_pwr>; - - /* - * S2, S5, S7, S10 are ARCs: - * S2 - cx.lvl, - * S5 - mss.lvl, - * S7 - gfx.lvl, - * S10 - mx.lvl. - */ - - vdd22_wlpa_s1c: - vreg_s1c_2p2: smps1 { - regulator-name = "vreg_s1c_2p2"; - regulator-min-microvolt = <2190000>; - regulator-max-microvolt = <2210000>; - }; - - vreg_s9c_0p676: smps9 { - regulator-name = "vreg_s9c_0p676"; - regulator-min-microvolt = <1010000>; - regulator-max-microvolt = <1170000>; - }; - - vdd_a_usbhs_1p8: - vdd_qfprom: - vreg_l1c_1p8: ldo1 { - regulator-name = "vreg_l1c_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1980000>; - regulator-initial-mode = ; - }; - - iovdd_ts: - vreg_l2c_1p8: ldo2 { - regulator-name = "vreg_l2c_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vdd_ts: - vreg_l3c_3p0: ldo3 { - regulator-name = "vreg_l3c_3p0"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3304000>; - regulator-initial-mode = ; - }; - - vreg_l4c_1p8_3p0: ldo4 { - regulator-name = "vreg_l4c_1p8_3p0"; - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = ; - }; - - vreg_l5c_1p8_3p0: ldo5 { - regulator-name = "vreg_l5c_1p8_3p0"; - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = ; - }; - - vreg_l6c_2p96: ldo6 { - regulator-name = "vreg_l6c_2p96"; - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = ; - }; - - vreg_l7c_3p0: ldo7 { - regulator-name = "vreg_l7c_3p0"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = ; - }; - - vreg_l8c_1p8: ldo8 { - regulator-name = "vreg_l8c_1p8"; - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = ; - }; - - vreg_l9c_3p3: ldo9 { - regulator-name = "vreg_l9c_2p96"; - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = ; - }; - - vdd_a_dsi_0_0p9: - vdd_a_ufs_0_core: - vdd_a_usbhs_core: - vreg_l10c_0p88: ldo10 { - regulator-name = "vreg_l10c_0p88"; - regulator-min-microvolt = <720000>; - regulator-max-microvolt = <1050000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l11c_2p8: ldo11 { - regulator-name = "vreg_l11c_2p8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = ; - }; - - disp_iovcc_1p8: - vreg_l12c_1p8: ldo12 { - regulator-name = "vreg_l12c_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - disp_vci_3p0: - vreg_l13c_3p0: ldo13 { - regulator-name = "vreg_l13c_3p0"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-initial-mode = ; - }; - - audio_sw_vcc: - vreg_bob: bob { - regulator-name = "vreg_bob"; - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3960000>; - regulator-initial-mode = ; - }; - }; -}; - -&gcc { - protected-clocks = , - , - , - , - , - , - , - , - , - , - , - , - ; -}; - -&gpi_dma0 { - status = "okay"; -}; - -&gpi_dma1 { - status = "okay"; -}; - -&gpu { - status = "okay"; -}; - -&gpu_zap_shader { - firmware-name = "qcom/sm7325/motorola/dubai/a660_zap.mbn"; -}; - -&i2c4 { - clock-frequency = <100000>; - - status = "okay"; - - typec-mux@42 { - compatible = "fcs,fsa4480"; - reg = <0x42>; - - interrupts-extended = <&tlmm 6 IRQ_TYPE_LEVEL_LOW>; - - vcc-supply = <&audio_sw_vcc>; - - mode-switch; - orientation-switch; - - port { - fsa4480_sbu_mux: endpoint { - remote-endpoint = <&pmic_glink_sbu>; - }; - }; - }; -}; - -&ipa { - firmware-name = "qcom/sm7325/motorola/dubai/yupik_ipa_fws.mbn"; - - status = "okay"; -}; - -&pm7250b_adc { - channel@4e { - reg = ; - qcom,ratiometric; - qcom,hw-settle-time = <200>; - qcom,pre-scaling = <1 1>; - label = "chg_skin_therm"; - }; - - channel@4f { - reg = ; - qcom,ratiometric; - qcom,hw-settle-time = <200>; - qcom,pre-scaling = <1 1>; - label = "conn_therm"; - }; -}; - -&pm7250b_adc_tm { - status = "okay"; - - chg-skin-therm@0 { - reg = <0>; - io-channels = <&pm7250b_adc ADC5_AMUX_THM2_100K_PU>; - qcom,ratiometric; - qcom,hw-settle-time-us = <200>; - }; - - conn-therm@1 { - reg = <1>; - io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>; - qcom,ratiometric; - qcom,hw-settle-time-us = <200>; - }; -}; - -&pm7250b_gpios { - gpio-line-names = "FG_ALERT_N", /* GPIO_1 */ - "SLAVECP_INT", - "NC", - "NC", - "NC", - "DOUBLER_STAT", - "NC", - "NC", - "NC", - "NC", /* GPIO_10 */ - "NC", - "NC"; -}; - -&pm7325_gpios { - gpio-line-names = "PA_THERM1", /* GPIO_1 */ - "NC", - "NC", - "PA_THERM2", - "CBL_PWR_N", - "KYPD_VOL_UP_N", - "NC", - "NC", - "NC", - "NC"; /* GPIO_10 */ - - kypd_vol_up_n: kypd-volp-n-state { - pins = "gpio6"; - function = PMIC_GPIO_FUNC_NORMAL; - bias-pull-up; - input-enable; - power-source = <1>; - }; -}; - -&pm8350c_gpios { - gpio-line-names = "NC", /* GPIO_1 */ - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC"; /* GPIO_9 */ -}; - -&pm8350c_flash { - status = "okay"; - - led-0 { - function = LED_FUNCTION_FLASH; - color = ; - led-sources = <1>, <4>; - led-max-microamp = <500000>; - flash-max-microamp = <1500000>; - flash-max-timeout-us = <400000>; - }; - - led-1 { - function = LED_FUNCTION_FLASH; - color = ; - led-sources = <2>, <3>; - led-max-microamp = <500000>; - flash-max-microamp = <1500000>; - flash-max-timeout-us = <400000>; - }; -}; - -&pmk8350_adc_tm { - status = "okay"; - - xo-therm@0 { - reg = <0>; - io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; - qcom,ratiometric; - qcom,hw-settle-time-us = <200>; - }; - - quiet-therm@1 { - reg = <1>; - io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>; - qcom,ratiometric; - qcom,hw-settle-time-us = <200>; - }; - - cam-flash-therm@2 { - reg = <2>; - io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>; - qcom,ratiometric; - qcom,hw-settle-time-us = <200>; - }; - - sdm-skin-therm@3 { - reg = <3>; - io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>; - qcom,ratiometric; - qcom,hw-settle-time-us = <200>; - }; - - chg-therm@4 { - reg = <4>; - io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>; - qcom,ratiometric; - qcom,hw-settle-time-us = <200>; - }; - - pa-therm-1@5 { - reg = <5>; - io-channels = <&pmk8350_vadc PM7325_ADC7_GPIO1_100K_PU>; - qcom,ratiometric; - qcom,hw-settle-time-us = <200>; - }; - - pa-therm-2@6 { - reg = <6>; - io-channels = <&pmk8350_vadc PM7325_ADC7_GPIO4_100K_PU>; - qcom,ratiometric; - qcom,hw-settle-time-us = <200>; - }; -}; - -&pmk8350_gpios { - gpio-line-names = "NC", /* GPIO_0 */ - "NC", - "TP_PMK_GPIO_3", - "PMK_OPTION"; /* GPIO_4 */ -}; - -&pmk8350_rtc { - status = "okay"; -}; - -&pmk8350_vadc { - status = "okay"; - - channel@44 { - reg = ; - qcom,ratiometric; - qcom,hw-settle-time = <200>; - qcom,pre-scaling = <1 1>; - label = "pmk8350_xo_therm"; - }; - - channel@144 { - reg = ; - qcom,ratiometric; - qcom,hw-settle-time = <200>; - qcom,pre-scaling = <1 1>; - label = "pm7325_quiet_therm"; - }; - - channel@145 { - reg = ; - qcom,ratiometric; - qcom,hw-settle-time = <200>; - qcom,pre-scaling = <1 1>; - label = "pm7325_cam_flash_therm"; - }; - - channel@146 { - reg = ; - qcom,ratiometric; - qcom,hw-settle-time = <200>; - qcom,pre-scaling = <1 1>; - label = "pm7325_sdm_skin_therm"; - }; - - channel@147 { - reg = ; - qcom,ratiometric; - qcom,hw-settle-time = <200>; - qcom,pre-scaling = <1 1>; - label = "pm7325_chg_therm"; - }; - - channel@14a { - reg = ; - qcom,ratiometric; - qcom,hw-settle-time = <200>; - qcom,pre-scaling = <1 1>; - label = "pm7325_pa_therm1"; - }; - - channel@14d { - reg = ; - qcom,ratiometric; - qcom,hw-settle-time = <200>; - qcom,pre-scaling = <1 1>; - label = "pm7325_pa_therm2"; - }; -}; - -&pon_pwrkey { - status = "okay"; -}; - -&pon_resin { - linux,code = ; - - status = "okay"; -}; - -&qfprom { - vcc-supply = <&vdd_qfprom>; -}; - -&qup_spi13_cs { - drive-strength = <6>; - bias-pull-down; -}; - -&qup_spi13_data_clk { - drive-strength = <6>; - bias-pull-down; -}; - -&qup_uart5_rx { - drive-strength = <2>; - bias-disable; -}; - -&qup_uart5_tx { - drive-strength = <2>; - bias-disable; -}; - -&qup_uart7_cts { - /* - * Configure a bias-bus-hold on CTS to lower power - * usage when Bluetooth is turned off. Bus hold will - * maintain a low power state regardless of whether - * the Bluetooth module drives the pin in either - * direction or leaves the pin fully unpowered. - */ - bias-bus-hold; -}; - -&qup_uart7_rts { - /* We'll drive RTS, so no pull */ - drive-strength = <2>; - bias-disable; -}; - -&qup_uart7_rx { - /* - * Configure a pull-up on RX. This is needed to avoid - * garbage data when the TX pin of the Bluetooth module is - * in tri-state (module powered off or not driving the - * signal yet). - */ - bias-pull-up; -}; - -&qup_uart7_tx { - /* We'll drive TX, so no pull */ - drive-strength = <2>; - bias-disable; -}; - -&qupv3_id_0 { - status = "okay"; -}; - -&qupv3_id_1 { - status = "okay"; -}; - -&remoteproc_adsp { - firmware-name = "qcom/sm7325/motorola/dubai/adsp.mbn"; - - status = "okay"; -}; - -&remoteproc_cdsp { - firmware-name = "qcom/sm7325/motorola/dubai/cdsp.mbn"; - - status = "okay"; -}; - -&remoteproc_mpss { - firmware-name = "qcom/sm7325/motorola/dubai/modem.mbn"; - - status = "okay"; -}; - -&remoteproc_wpss { - firmware-name = "qcom/sm7325/motorola/dubai/wpss.mbn"; - - status = "okay"; -}; - -&rmtfs_mem { - qcom,vmid = , - ; -}; - -&spi13 { - status = "okay"; - - touchscreen@0 { - compatible = "goodix,gt9916"; - reg = <0>; - - interrupts-extended = <&tlmm 81 IRQ_TYPE_LEVEL_LOW>; - - reset-gpios = <&tlmm 105 GPIO_ACTIVE_LOW>; - - avdd-supply = <&vdd_ts>; - vddio-supply = <&iovdd_ts>; - - spi-max-frequency = <1000000>; - - touchscreen-size-x = <1080>; - touchscreen-size-y = <2400>; - - pinctrl-0 = <&ts_int_n>, <&ts_reset_n>; - pinctrl-names = "default"; - }; -}; - -&tlmm { - gpio-line-names = "NC", /* GPIO_0 */ - "NC", - "NC", - "NC", - "SMARTPA_I2C_SDA", - "SMARTPA_I2C_SCK", - "AUD_4480_DET", - "AUD_4480_INT", - "FASTCHARGE_I2C_SDA", - "FASTCHARGE_I2C_SCL", - "SM_GPSLNA_EN_GPIO10", /* GPIO_10 */ - "NC", - "PERI_I2C_SDA", - "PERI_I2C_SCL", - "NC", - "NC", - "APPS_I2C_SDA", - "APPS_I2C_SCL", - "NC", - "DISP_LDO_EN", - "CAM_FW_RST_N", /* GPIO_20 */ - "CAM_RM_RST_N", - "DBG_UART_TXD", - "DBG_UART_RXD", - "TOPSB_INT_N", - "MCAM_LDO_EN", - "HOST2WLAN_SOL", - "WLAN2HOST_SOL", - "UART_BT_RTS_AP_CTS", - "UART_BT_CTS_AP_RTS", - "UART_BT_RX_AP_TX", /* GPIO_30 */ - "UART_BT_TX_AP_RX", - "FRONT_60M_INT", - "FRONT_60M_RST", - "FP_INT", - "FP_RST", - "NFC_I2C_SDA", - "NFC_I2C_SCL", - "NFC_EN", - "NFC_CLK_REQ", - "NFC_SE_SPI_NREST", /* GPIO_40 */ - "NFC_IRQ", - "RF_LDO_GPIO42_EN", - "GOOGLE_KEY_INT", /* no such key exists */ - "DISP_RST_N", - "SB_INT_N", - "HAP_RST_N", - "HAP_INT", - "ESE_SPI_MISO", - "ESE_SPI_MOSI", - "ESE_SPI_CLK", /* GPIO_50 */ - "ESE_SPI_CS", - "TP_SPI_MISO", - "TP_SPI_MOSI", - "TP_SPI_CLK", - "TP_SPI_CS_N", - "FP_SPI_MISO", - "FP_SPI_MOSI", - "FP_SPI_CLK", - "FP_SPI_CS_N", - "HW_ID_1", /* GPIO_60 */ - "HW_ID_2", - "CAM_PMU_EN", - "WIDE_DVDD_LDO_EN", - "CAM_MCLK0", - "CAM_MCLK1", - "CAM_MCLK2", - "CAM_MCLK3", - "NC", - "CCI_I2C_SDA0", - "CCI_I2C_SCL0", /* GPIO_70 */ - "CCI_I2C_SDA1", - "CCI_I2C_SCL1", - "CCI_I2C_SDA2", - "CCI_I2C_SCL2", - "CCI_I2C_SDA3", - "CCI_I2C_SCL3", - "CAM_RT_RST_N", - "CAM_RU_RST_N", - "FCAM_LDO_EN", - "DISP_TE", /* GPIO_80 */ - "TP_INT_N", - "FORCED_USB_BOOT", - "SM_CDC_RST_N", - "WLAN_EN", - "BT_EN", - "WCN_SW_CTRL", - "PCIE0_RESET_N", - "PCIE0_CLK_REQ_N", - "PCIE0_WAKE_N", - "MOS_AS_EN", /* GPIO_90 */ - "NC", - "", - "NC", - "BT_FM_SLIMBUS_CLK", - "BT_FM_SLIMBUS_DATA", - "NC", - "RFCONN_DET_1", - "RF_CON_DET_2", - "RF_CON_DET_3", - "NC", /* GPIO_100 */ - "NC", - "NC", - "ACCEL_INT", - "NC", - "TP_RST_N", - "NC", - "NC", - "NC", - "UIM2_DATA", - "UIM2_CLK", /* GPIO_110 */ - "UIM2_RESET", - "UIM2_PRESENT", - "UIM1_DATA", - "UIM1_CLK", - "UIM1_RESET", - "UIM1_PRESENT", - "SM_RFFE0_CLK", - "SM_RFFE0_DATA", - "SM_RFFE1_CLK", - "SM_RFFE1_DATA", /* GPIO_120 */ - "PA_MUTING", - "SM_GRFC5", - "LAA_RX", - "SM_GRFC7", - "SM_RFFE4_CLK", - "SM_RFFE4_DATA", - "WLAN_COEX_UART_RX", - "WLAN_COEX_UART_TX", - "NC", - "NC", /* GPIO_130 */ - "SM_GRFC12", - "NC", - "QLINK0_REQUEST", - "QLINK0_ENABLE", - "QLINK0_WMSS_RESET_N", - "NC", - "NC", - "NC", - "NC", - "USB_CC_DIR", /* GPIO_140 */ - "SAR_INT_N", - "PROX_INT_N", - "", - "SM_SWR_TX_CLK", - "SM_SWR_TX_DATA0", - "SM_SWR_TX_DATA1", - "SM_SWR_RX_CLK", - "SM_SWR_RX_DATA0", - "SM_SWR_RX_DATA1", - "NC", /* GPIO_150 */ - "NC", - "NC", - "NC", - "SB_MI2S_SCK", - "SB_MI2S_WS", - "SB_MI2S_RXDAT_AP_TX", - "SB_MI2S_TXDAT_AP_RX", - "NC", - "SNS_I3C0_SDA", - "SNS_I3C0_SCL", /* GPIO_160 */ - "SSC_I2C4_SDA", - "SSC_I2C4_SCL", - "MAG_I2C_SDA", - "MAG_I2C_SCL", - "NC", - "NC", - "", - "", - "", - "", /* GPIO_170 */ - "SSC_BT_UART4_TX", - "SSC_BT_UART4_RX", - "NC", - "NC"; - gpio-reserved-ranges = <48 4>, /* SPI (eSE - embedded Secure Element) */ - <56 4>; /* SPI (fingerprint reader) */ - - qup_uart7_sleep_cts: qup-uart7-sleep-cts-state { - pins = "gpio28"; - function = "gpio"; - /* - * Configure a bias-bus-hold on CTS to lower power - * usage when Bluetooth is turned off. Bus hold will - * maintain a low power state regardless of whether - * the Bluetooth module drives the pin in either - * direction or leaves the pin fully unpowered. - */ - bias-bus-hold; - }; - - qup_uart7_sleep_rts: qup-uart7-sleep-rts-state { - pins = "gpio29"; - function = "gpio"; - /* - * Configure pull-down on RTS. As RTS is active low - * signal, pull it low to indicate the BT SoC that it - * can wakeup the system anytime from suspend state by - * pulling RX low (by sending wakeup bytes). - */ - bias-pull-down; - }; - - qup_uart7_sleep_tx: qup-uart7-sleep-tx-state { - pins = "gpio30"; - function = "gpio"; - /* - * Configure pull-up on TX when it isn't actively driven - * to prevent BT SoC from receiving garbage during sleep. - */ - bias-pull-up; - }; - - qup_uart7_sleep_rx: qup-uart7-sleep-rx-state { - pins = "gpio31"; - function = "gpio"; - /* - * Configure a pull-up on RX. This is needed to avoid - * garbage data when the TX pin of the Bluetooth module - * is floating which may cause spurious wakeups. - */ - bias-pull-up; - }; - - oled_reset_n: oled-reset-n-state { - pins = "gpio44"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - - aw86224_reset_default: aw86224-reset-default-state { - pins = "gpio46"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - aw86224_int_default: aw86224-int-default-state { - pins = "gpio47"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - - mdp_vsync_p: mdp-vsync-p-state { - pins = "gpio80"; - function = "mdp_vsync"; - drive-strength = <2>; - bias-pull-down; - }; - - ts_int_n: ts-int-n-state { - pins = "gpio81"; - function = "gpio"; - drive-strength = <8>; - bias-pull-up; - }; - - bt_en: bt-en-state { - pins = "gpio85"; - function = "gpio"; - output-low; - bias-disable; - }; - - ts_reset_n: ts-int-n-state { - pins = "gpio105"; - function = "gpio"; - drive-strength = <8>; - bias-pull-up; - }; -}; - -&uart5 { - status = "okay"; -}; - -&uart7 { - /delete-property/ interrupts; - interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, - <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; - pinctrl-1 = <&qup_uart7_sleep_cts>, - <&qup_uart7_sleep_rts>, - <&qup_uart7_sleep_tx>, - <&qup_uart7_sleep_rx>; - pinctrl-names = "default", - "sleep"; - - status = "okay"; - - bluetooth: bluetooth { - compatible = "qcom,wcn6750-bt"; - - vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; - vddaon-supply = <&vreg_pmu_aon_0p59>; - vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>; - vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; - vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; - vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - - max-speed = <3200000>; - - qcom,local-bd-address-broken; - }; -}; - -&ufs_mem_hc { - reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; - - vcc-supply = <&vreg_l7b_2p96>; - vcc-max-microamp = <800000>; - - vccq-supply = <&vreg_l9b_1p2>; - vccq-max-microamp = <900000>; - - status = "okay"; -}; - -&ufs_mem_phy { - vdda-phy-supply = <&vdd_a_ufs_0_core>; - vdda-pll-supply = <&vdd_a_ufs_0_1p2>; - - status = "okay"; -}; - -&usb_1 { - /* USB 2.0 only */ - qcom,select-utmi-as-pipe-clk; - maximum-speed = "high-speed"; - - /* Remove USB3 phy */ - phys = <&usb_1_hsphy>; - phy-names = "usb2-phy"; - - status = "okay"; -}; - -&usb_1_dwc3_hs { - remote-endpoint = <&pmic_glink_hs_in>; -}; - -&usb_1_hsphy { - vdda-pll-supply = <&vdd_a_usbhs_core>; - vdda18-supply = <&vdd_a_usbhs_1p8>; - vdda33-supply = <&vdd_a_usbhs_3p1>; - - status = "okay"; -}; - -&venus { - firmware-name = "qcom/sm7325/motorola/dubai/vpu20_1v.mbn"; - - status = "okay"; -}; - -&wifi { - qcom,calibration-variant = "Motorola_dubai"; - - status = "okay"; -}; -- 2.55.0