From: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
To: "Vinod Koul" <vkoul@kernel.org>,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Bjorn Andersson" <andersson@kernel.org>,
"Konrad Dybcio" <konradybcio@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org,
Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Subject: [PATCH v2 3/6] phy: qcom: qmp-pcie: Add endpoint PHY configuration for QCS8300
Date: Mon, 19 Oct 2026 14:55:11 +0530 [thread overview]
Message-ID: <20261019-monaco_ep-v2-3-852cb9f5d012@oss.qualcomm.com> (raw)
In-Reply-To: <20261019-monaco_ep-v2-0-852cb9f5d012@oss.qualcomm.com>
Monaco supports PCIe Endpoint mode on both PCIe controllers. Reuse
the existing SA8775P Endpoint PHY programming for the 16 GT/s x2 PHY and
add a new 16 GT/s x4 Endpoint PHY configuration with the required RX
tuning parameters. The new RX tuning sequence is common to both RC and EP
modes.
This allows both Monaco PCIe controllers to operate reliably in
Endpoint mode.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 105 +++++++++++++++++++++++++++++++
1 file changed, 105 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index da83358c97ea..cf169d7cbd92 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -1231,6 +1231,58 @@ static const struct qmp_phy_init_tbl qcs8300_qmp_gen4x2_pcie_rx_alt_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH2, 0x1f),
};
+static const struct qmp_phy_init_tbl qcs8300_qmp_gen4x4_pcie_rx_alt_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_0_1, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_2_3, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_3, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_DAC_ENABLE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_GM_CAL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_PHPRE_CTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x7c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_IDAC_SAOFFSET, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE210, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE210, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE210, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH4_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH5_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH6_RATE3, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_Q_PI_INTRINSIC_BIAS_RATE32, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B0, 0x9b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B1, 0xb0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B2, 0xd2),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B3, 0xf0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B4, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B5, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B6, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B0, 0x9b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B1, 0xb6),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B2, 0xd2),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B3, 0xf0),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B4, 0x43),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B5, 0xdd),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B6, 0x0d),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B0, 0xf3),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B1, 0xf6),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B2, 0xee),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B3, 0xd2),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B4, 0x83),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B5, 0xf9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B6, 0x3d),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH2, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE3, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_SO_GAIN_RATE3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_PI_CONTROLS, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_VGA_CAL_CNTRL1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_VGA_CAL_MAN_VAL, 0x08),
+};
+
static const struct qmp_phy_init_tbl sdm845_qmp_pcie_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
@@ -4583,6 +4635,56 @@ static const struct qmp_phy_cfg qcs8300_qmp_gen4x2_pciephy_cfg = {
.pcs_misc_num = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_rc_pcs_misc_tbl),
},
+ .tbls_ep = &(const struct qmp_phy_cfg_tbls) {
+ .serdes = sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl,
+ .serdes_num = ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl),
+ .pcs_misc = sm8450_qmp_gen4x2_pcie_ep_pcs_misc_tbl,
+ .pcs_misc_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_ep_pcs_misc_tbl),
+ .pcs = sa8775p_qmp_gen4x2_pcie_ep_pcs_alt_tbl,
+ .pcs_num = ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_ep_pcs_alt_tbl),
+ },
+
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = pciephy_v5_regs_layout,
+
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS_4_20,
+};
+
+static const struct qmp_phy_cfg qcs8300_qmp_gen4x4_pciephy_cfg = {
+ .lanes = 4,
+ .offsets = &qmp_pcie_offsets_v5_30,
+
+ .tbls = {
+ .serdes = sa8775p_qmp_gen4x4_pcie_serdes_alt_tbl,
+ .serdes_num = ARRAY_SIZE(sa8775p_qmp_gen4x4_pcie_serdes_alt_tbl),
+ .tx = sa8775p_qmp_gen4_pcie_tx_tbl,
+ .tx_num = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_tx_tbl),
+ .rx = qcs8300_qmp_gen4x4_pcie_rx_alt_tbl,
+ .rx_num = ARRAY_SIZE(qcs8300_qmp_gen4x4_pcie_rx_alt_tbl),
+ .pcs = sa8775p_qmp_gen4_pcie_pcs_alt_tbl,
+ .pcs_num = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_pcs_alt_tbl),
+ .pcs_misc = sa8775p_qmp_gen4_pcie_pcs_misc_tbl,
+ .pcs_misc_num = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_pcs_misc_tbl),
+ },
+
+ .tbls_rc = &(const struct qmp_phy_cfg_tbls) {
+ .serdes = sa8775p_qmp_gen4x4_pcie_rc_serdes_alt_tbl,
+ .serdes_num = ARRAY_SIZE(sa8775p_qmp_gen4x4_pcie_rc_serdes_alt_tbl),
+ .pcs_misc = sa8775p_qmp_gen4_pcie_rc_pcs_misc_tbl,
+ .pcs_misc_num = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_rc_pcs_misc_tbl),
+ },
+
+ .tbls_ep = &(const struct qmp_phy_cfg_tbls) {
+ .serdes = sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl,
+ .serdes_num = ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl),
+ .pcs_misc = sm8450_qmp_gen4x2_pcie_ep_pcs_misc_tbl,
+ .pcs_misc_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_ep_pcs_misc_tbl),
+ },
+
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -6411,6 +6513,9 @@ static const struct of_device_id qmp_pcie_of_match_table[] = {
}, {
.compatible = "qcom,qcs8300-qmp-gen4x2-pcie-phy",
.data = &qcs8300_qmp_gen4x2_pciephy_cfg,
+ }, {
+ .compatible = "qcom,qcs8300-qmp-gen4x4-pcie-phy",
+ .data = &qcs8300_qmp_gen4x4_pciephy_cfg,
}, {
.compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy",
.data = &sa8775p_qmp_gen4x2_pciephy_cfg,
--
2.34.1
next prev parent reply other threads:[~2026-10-19 9:25 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-19 9:25 [PATCH v2 0/6] PCI: qcom-ep: Add PCIe Endpoint support for Monaco Krishna Chaitanya Chundru
2026-10-19 9:25 ` [PATCH v2 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Add qcs8300 16 GT/s PHY Krishna Chaitanya Chundru
2026-10-19 9:25 ` [PATCH v2 2/6] dt-bindings: PCI: qcom-ep: Add QCS8300 compatible Krishna Chaitanya Chundru
2026-10-19 9:25 ` Krishna Chaitanya Chundru [this message]
2026-10-19 9:25 ` [PATCH v2 4/6] PCI: qcom-ep: Set initial interconnect bandwidth before enabling clocks Krishna Chaitanya Chundru
2026-10-19 9:25 ` [PATCH v2 5/6] arm64: qcom: monaco: Fix pcie1_phy compatible to list qcs8300 first Krishna Chaitanya Chundru
2026-10-19 9:25 ` [PATCH v2 6/6] arm64: qcom: monaco: Add PCIe Endpoint nodes Krishna Chaitanya Chundru
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261019-monaco_ep-v2-3-852cb9f5d012@oss.qualcomm.com \
--to=krishna.chundru@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=manivannan.sadhasivam@oss.qualcomm.com \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®