[PATCH net] net: ag71xx: reallocate rx buffers when changing the MTU

[Rosen Penev <rosenp@gmail.com>]

The rx buffers are sized from the MTU in ag71xx_open(), but
ag71xx_change_mtu() writes the new maximum frame length straight to
the MAC while the interface is running. The rx descriptors carry no
buffer length, so after raising the MTU the MAC accepts and DMAs
frames larger than the mapped buffer, overwriting the skb_shared_info
at the end of the fragment and whatever follows it.

This is reachable without user action: DSA raises the MTU of a
running conduit to make room for the switch tag.

Restart the interface when the MTU changes while it is up, so the
rings are refilled with buffers sized for the new MTU before the MAC
is programmed with the new frame length.

Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/net/ethernet/atheros/ag71xx.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/atheros/ag71xx.c b/drivers/net/ethernet/atheros/ag71xx.c
index 8a3c689f6825..3c9de8c2ba64 100644
--- a/drivers/net/ethernet/atheros/ag71xx.c
+++ b/drivers/net/ethernet/atheros/ag71xx.c
@@ -1761,11 +1761,19 @@ static irqreturn_t ag71xx_interrupt(int irq, void *dev_id)
 
 static int ag71xx_change_mtu(struct net_device *ndev, int new_mtu)
 {
-	struct ag71xx *ag = netdev_priv(ndev);
+	bool running = netif_running(ndev);
+
+	/* The rx buffers are sized for the MTU at open time and the rx
+	 * descriptors carry no buffer length, so a larger MTU must not
+	 * reach the MAC before the rings have been refilled.
+	 */
+	if (running)
+		ag71xx_stop(ndev);
 
 	WRITE_ONCE(ndev->mtu, new_mtu);
-	ag71xx_wr(ag, AG71XX_REG_MAC_MFL,
-		  ag71xx_max_frame_len(ndev->mtu));
+
+	if (running)
+		return ag71xx_open(ndev);
 
 	return 0;
 }
-- 
2.56.0