mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jiaming Zhang <r772577952@gmail.com>
To: jlbec@evilplan.org, joseph.qi@linux.alibaba.com, mark@fasheh.com,
	ocfs2-devel@lists.linux.dev
Cc: r772577952@gmail.com, heming.zhao@suse.com,
	linux-kernel@vger.kernel.org, syzkaller@googlegroups.com,
	stable@vger.kernel.org
Subject: [PATCH] ocfs2: validate the block count of a local quota file
Date: Mon, 19 Oct 2026 23:47:32 +0800	[thread overview]
Message-ID: <20261019154732.3149351-1-r772577952@gmail.com> (raw)
In-Reply-To: <CANypQFbjcxXjiigMCCyErN=DSEh3ZG3NMWRpq=Hic8KJ76cwew@mail.gmail.com>

Every ocfs2 node keeps a local quota file made of chunks.  A chunk is a
header block, whose bitmap marks the entries in use, followed by up to
ol_chunk_blocks() blocks of entries, and only the last chunk may be
partly filled.  The file header records the number of chunks in
dqi_chunks and the number of blocks in dqi_blocks.  When no chunk has a
free entry, ocfs2_extend_local_quota_file() works out from dqi_blocks
how many entry blocks the last chunk already has, and puts the new entry
right after them:

	chunk_blocks = oinfo->dqi_blocks - ol_quota_chunk_block(sb,
			chunk->qc_num) - 1; ... *offset = chunk_blocks * epb;

olq_alloc_dquot() then sets that bit in the chunk's bitmap, which fits
in a single block.  This is only safe while chunk_blocks is at most
ol_chunk_blocks().

ocfs2_local_read_info() reads dqi_chunks and dqi_blocks from disk at
mount time and never checks that they agree.  With one chunk and a
dqi_blocks of a few thousand, the last chunk appears to hold thousands
of entry blocks, and the bit lands kilobytes past the end of the bitmap.
A dqi_blocks below the last chunk's header block makes chunk_blocks, an
unsigned int, wrap around to the same effect.

The stray write corrupts unrelated kernel memory.  KASAN calls it a
use-after-free only because the page it hits happens to be free; nothing
in ocfs2 was freed.  Reaching it takes mounting a crafted image with
quotas enabled, which needs CAP_SYS_ADMIN, and creating a file.  The
issue was found by fuzzing and not seen in production, the reproducer
can be found in the linked report.

Check in ocfs2_local_read_info() that the last chunk has its header
block and at most ol_chunk_blocks() entry blocks, and that a file
without chunks holds only its info block, since the first new chunk is
placed at block dqi_blocks.  Refuse the file with ocfs2_error()
otherwise, as ocfs2_read_quota_block() does for a corrupted quota file.
The header block of the last chunk is computed in 64 bits because a
crafted dqi_chunks can wrap ol_quota_chunk_block().

Fixes: 9e33d69f553a ("ocfs2: Implementation of local and global quota file handling")
Closes: https://lore.kernel.org/lkml/CANypQFbjcxXjiigMCCyErN=DSEh3ZG3NMWRpq=Hic8KJ76cwew@mail.gmail.com/
Cc: stable@vger.kernel.org
Assisted-by: Claude Code:claude-opus-5-5
Signed-off-by: Jiaming Zhang <r772577952@gmail.com>
---
 fs/ocfs2/quota_local.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/fs/ocfs2/quota_local.c b/fs/ocfs2/quota_local.c
index f55810c59b1b..bad913d8bc4f 100644
--- a/fs/ocfs2/quota_local.c
+++ b/fs/ocfs2/quota_local.c
@@ -678,6 +678,30 @@ int ocfs2_finish_quota_recovery(struct ocfs2_super *osb,
 	return status;
 }
 
+/* Check that dqi_blocks agrees with dqi_chunks in local quota file info */
+static int ocfs2_local_check_info(struct super_block *sb, struct inode *lqinode,
+				  struct ocfs2_mem_dqinfo *oinfo)
+{
+	u64 hdr_blk;
+
+	if (!oinfo->dqi_chunks) {
+		if (oinfo->dqi_blocks == ol_quota_chunk_block(sb, 0))
+			return 0;
+	} else {
+		/* Same as ol_quota_chunk_block(), but in 64 bits */
+		hdr_blk = 1 + (u64)(ol_chunk_blocks(sb) + 1) *
+			      (oinfo->dqi_chunks - 1);
+		if (oinfo->dqi_blocks > hdr_blk &&
+		    oinfo->dqi_blocks - hdr_blk - 1 <= ol_chunk_blocks(sb))
+			return 0;
+	}
+
+	return ocfs2_error(sb,
+			   "corrupted local quota file %llu (chunks=%u blocks=%u)\n",
+			   (u64)OCFS2_I(lqinode)->ip_blkno,
+			   oinfo->dqi_chunks, oinfo->dqi_blocks);
+}
+
 /* Read information header from quota file */
 static int ocfs2_local_read_info(struct super_block *sb, int type)
 {
@@ -733,6 +757,10 @@ static int ocfs2_local_read_info(struct super_block *sb, int type)
 	oinfo->dqi_blocks = le32_to_cpu(ldinfo->dqi_blocks);
 	oinfo->dqi_libh = bh;
 
+	status = ocfs2_local_check_info(sb, lqinode, oinfo);
+	if (status)
+		goto out_err;
+
 	/* We crashed when using local quota file? */
 	if (!(oinfo->dqi_flags & OLQF_CLEAN)) {
 		rec = OCFS2_SB(sb)->quota_rec;

      reply	other threads:[~2026-10-19 15:47 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-15 14:19 [Linux Kernel Bug] KASAN: use-after-free Write in olq_alloc_dquot Jiaming Zhang
2026-10-19 15:47 ` Jiaming Zhang [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261019154732.3149351-1-r772577952@gmail.com \
    --to=r772577952@gmail.com \
    --cc=heming.zhao@suse.com \
    --cc=jlbec@evilplan.org \
    --cc=joseph.qi@linux.alibaba.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark@fasheh.com \
    --cc=ocfs2-devel@lists.linux.dev \
    --cc=stable@vger.kernel.org \
    --cc=syzkaller@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®