From: Long Zhao via B4 Relay <devnull+longzhao.ambarella.com@kernel.org>
To: Bartosz Golaszewski <brgl@kernel.org>, linux-gpio@vger.kernel.org
Cc: Linus Walleij <linusw@kernel.org>,
Michael Walle <mwalle@kernel.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>,
Conor Dooley <conor+dt@kernel.org>,
devicetree@vger.kernel.org, Long Zhao <longzhao@ambarella.com>,
Long Zhao <zl020895@163.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v11 6/9] gpio: pl061: use cleanup helpers for locks
Date: Tue, 20 Oct 2026 15:54:10 +0800 [thread overview]
Message-ID: <20261020-cv75-gpio-v11-6-e058bae19571@ambarella.com> (raw)
In-Reply-To: <20261020-cv75-gpio-v11-0-e058bae19571@ambarella.com>
From: Long Zhao <longzhao@ambarella.com>
Convert raw_spinlock critical sections to guard()() from cleanup.h.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Long Zhao <longzhao@ambarella.com>
---
drivers/gpio/gpio-pl061.c | 27 ++++++++++-----------------
1 file changed, 10 insertions(+), 17 deletions(-)
diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index 1937941745f4..bbf457a12851 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -10,6 +10,7 @@
*/
#include <linux/amba/bus.h>
#include <linux/bitops.h>
+#include <linux/cleanup.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/gpio/driver.h>
@@ -105,11 +106,10 @@ static int pl061_get_direction(struct gpio_chip *gc, unsigned offset)
static int pl061_direction_input(struct gpio_chip *gc, unsigned offset)
{
struct pl061 *pl061 = gpiochip_get_data(gc);
- unsigned long flags;
- raw_spin_lock_irqsave(&pl061->lock, flags);
+ guard(raw_spinlock_irqsave)(&pl061->lock);
+
regmap_clear_bits(pl061->regmap, GPIODIR, BIT(offset));
- raw_spin_unlock_irqrestore(&pl061->lock, flags);
return 0;
}
@@ -118,10 +118,10 @@ static int pl061_direction_output(struct gpio_chip *gc, unsigned offset,
int value)
{
struct pl061 *pl061 = gpiochip_get_data(gc);
- unsigned long flags;
unsigned int mask = BIT(offset);
- raw_spin_lock_irqsave(&pl061->lock, flags);
+ guard(raw_spinlock_irqsave)(&pl061->lock);
+
regmap_assign_bits(pl061->regmap, BIT(offset + PL061_DATA_OFFSET),
BIT(offset), value);
regmap_set_bits(pl061->regmap, GPIODIR, mask);
@@ -132,7 +132,6 @@ static int pl061_direction_output(struct gpio_chip *gc, unsigned offset,
*/
regmap_assign_bits(pl061->regmap, BIT(offset + PL061_DATA_OFFSET),
BIT(offset), value);
- raw_spin_unlock_irqrestore(&pl061->lock, flags);
return 0;
}
@@ -163,7 +162,6 @@ static int pl061_irq_type(struct irq_data *d, unsigned trigger)
unsigned int gpioiev = 0;
unsigned int gpioibe = 0;
unsigned int gpiois = 0;
- unsigned long flags;
if (offset < 0 || offset >= PL061_GPIO_NR)
return -EINVAL;
@@ -176,8 +174,7 @@ static int pl061_irq_type(struct irq_data *d, unsigned trigger)
return -EINVAL;
}
-
- raw_spin_lock_irqsave(&pl061->lock, flags);
+ guard(raw_spinlock_irqsave)(&pl061->lock);
regmap_read(pl061->regmap, GPIOIEV, &gpioiev);
regmap_read(pl061->regmap, GPIOIS, &gpiois);
@@ -237,8 +234,6 @@ static int pl061_irq_type(struct irq_data *d, unsigned trigger)
regmap_write(pl061->regmap, GPIOIBE, gpioibe);
regmap_write(pl061->regmap, GPIOIEV, gpioiev);
- raw_spin_unlock_irqrestore(&pl061->lock, flags);
-
return 0;
}
@@ -267,9 +262,8 @@ static void pl061_irq_mask(struct irq_data *d)
struct pl061 *pl061 = gpiochip_get_data(gc);
u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR);
- raw_spin_lock(&pl061->lock);
- regmap_clear_bits(pl061->regmap, GPIOIE, mask);
- raw_spin_unlock(&pl061->lock);
+ scoped_guard(raw_spinlock, &pl061->lock)
+ regmap_clear_bits(pl061->regmap, GPIOIE, mask);
gpiochip_disable_irq(gc, d->hwirq);
}
@@ -282,9 +276,8 @@ static void pl061_irq_unmask(struct irq_data *d)
gpiochip_enable_irq(gc, d->hwirq);
- raw_spin_lock(&pl061->lock);
- regmap_set_bits(pl061->regmap, GPIOIE, mask);
- raw_spin_unlock(&pl061->lock);
+ scoped_guard(raw_spinlock, &pl061->lock)
+ regmap_set_bits(pl061->regmap, GPIOIE, mask);
}
/**
--
2.34.1
next prev parent reply other threads:[~2026-10-20 7:54 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-20 7:54 [PATCH v11 0/9] gpio: add Ambarella CV75 PL061 support Long Zhao via B4 Relay
2026-10-20 7:54 ` [PATCH v11 1/9] dt-bindings: gpio: pl061: add Ambarella CV75 variant Long Zhao via B4 Relay
2026-10-20 7:54 ` [PATCH v11 2/9] gpiolib: regmap: add GPIO_REGMAP_QUIRK_SET_AFTER_DIR Long Zhao via B4 Relay
2026-10-20 7:54 ` [PATCH v11 3/9] gpio: pl061: drop redundant pending check in the IRQ handler Long Zhao via B4 Relay
2026-10-20 7:54 ` [PATCH v11 4/9] gpio: pl061: convert register access to regmap Long Zhao via B4 Relay
2026-10-20 7:54 ` [PATCH v11 5/9] gpio: pl061: use IRQ_TYPE_LEVEL_MASK and IRQ_TYPE_EDGE_BOTH Long Zhao via B4 Relay
2026-10-20 7:54 ` Long Zhao via B4 Relay [this message]
2026-10-20 7:54 ` [PATCH v11 7/9] gpio: pl061: keep the parent device in a local Long Zhao via B4 Relay
2026-10-20 7:54 ` [PATCH v11 8/9] gpio: pl061: switch data path to gpio-regmap Long Zhao via B4 Relay
2026-10-20 7:54 ` [PATCH v11 9/9] gpio: pl061: add Ambarella register-layout variant Long Zhao via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261020-cv75-gpio-v11-6-e058bae19571@ambarella.com \
--to=devnull+longzhao.ambarella.com@kernel.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=brgl@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linusw@kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=longzhao@ambarella.com \
--cc=mwalle@kernel.org \
--cc=robh@kernel.org \
--cc=zl020895@163.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®