From: Frank.Li@oss.nxp.com
To: Marek Vasut <marex@denx.de>, Stefan Agner <stefan@agner.ch>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>,
Simona Vetter <simona@ffwll.ch>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Jessica Zhang <jesszhan0024@gmail.com>,
Thierry Reding <thierry.reding@gmail.com>,
Sam Ravnborg <sam@ravnborg.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
Robert Chiras <robert.chiras@nxp.com>,
Liu Ying <victor.liu@nxp.com>, Frank Li <Frank.Li@nxp.com>
Subject: [PATCH v3 5/7] arm64: dts: imx8dxl-evk: Add onboard GPIO mux controller
Date: Tue, 20 Oct 2026 16:12:55 -0400 [thread overview]
Message-ID: <20261020-dxl_lcdif-v3-5-adc944659e14@nxp.com> (raw)
In-Reply-To: <20261020-dxl_lcdif-v3-0-adc944659e14@nxp.com>
From: Frank Li <Frank.Li@nxp.com>
Add a GPIO mux controller to describe the onboard signal multiplexer.
Previously, the device tree relied on the hardware reset defaults to
select the mux state. Now that the kernel supports the pinctrl-multiplexer
framework, describe the onboard mux explicitly and let the kernel configure
the required routing.
Prepare for additional device tree overlays that require different mux
configurations.
Remove the regulator-m2uart1sel node, which incorrectly modeled the board
mux as a regulator.
There are no backward compatibility concerns, as the affected functions
(lpuart1 for Bluetooth, spi3, and m4_lpuart) are not used by existing other
users such as U-Boot.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 76 +++++++++++++++++++++++----
1 file changed, 65 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index 71eff3efa6d32..312e4ef3a6760 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -97,14 +97,68 @@ vdev0buffer: vdev0buffer@90400000 {
};
};
- m2_uart1_sel: regulator-m2uart1sel {
- compatible = "regulator-fixed";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "m2_uart1_sel";
- gpio = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
+ m4_debug_mux: mux-controller-0 {
+ compatible = "gpio-mux";
+ #mux-control-cells = <0>;
+ #mux-state-cells = <1>;
+ mux-gpios = <&pca6416_1 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ spi3_mux: mux-controller-1 {
+ compatible = "gpio-mux";
+ #mux-control-cells = <0>;
+ #mux-state-cells = <1>;
+ mux-gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ uart1_mux: mux-controller-2 {
+ compatible = "gpio-mux";
+ #mux-control-cells = <0>;
+ #mux-state-cells = <1>;
+ mux-gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ spi0_mux: mux-controller-3 {
+ compatible = "gpio-mux";
+ #mux-control-cells = <0>;
+ #mux-state-cells = <1>;
+ mux-gpios = <&pca6416_1 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ pinctrl-gpiomux {
+ compatible = "pinctrl-multiplexer";
+
+ m4_debug_fun: cm4-uart-grp {
+ mux-states = <&m4_debug_mux 1>;
+ };
+
+ spi0_fun: spi0-grp {
+ mux-states = <&spi0_mux 1>;
+ };
+
+ spi3_fun: spi3-grp {
+ mux-states = <&spi3_mux 1>;
+ };
+
+ uart1_fun: uart1-grp {
+ mux-states = <&uart1_mux 1>;
+ };
+
+ lcd_0_fun: lcd0-grp {
+ mux-states = <&spi0_mux 0>;
+ };
+
+ lcd_1_fun: lcd1-grp {
+ mux-states = <&spi3_mux 0>;
+ };
+
+ lcd_2_fun: lcd2-grp {
+ mux-states = <&uart1_mux 0>;
+ };
+
+ lcd_3_fun: lcd3-grp {
+ mux-states = <&m4_debug_mux 0>;
+ };
};
mux3_en: regulator-0 {
@@ -620,7 +674,7 @@ &lpuart0 {
&lpuart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lpuart1>;
+ pinctrl-0 = <&pinctrl_lpuart1>, <&uart1_fun>;
status = "okay";
bluetooth {
@@ -658,7 +712,7 @@ &cm40_intmux {
&cm40_lpuart {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_cm40_lpuart>;
+ pinctrl-0 = <&pinctrl_cm40_lpuart>, <&m4_debug_fun>;
status = "disabled";
};
@@ -879,7 +933,7 @@ &usdhc2 {
&lpspi3 {
fsl,spi-only-use-cs1-sel;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lpspi3>;
+ pinctrl-0 = <&pinctrl_lpspi3>, <&spi3_fun>;
status = "okay";
};
--
2.43.0
next prev parent reply other threads:[~2026-10-20 20:13 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-20 20:12 [PATCH v3 0/7] display: lcdif: imx: add display support for imx8dxl and imx8qxp Frank.Li
2026-10-20 20:12 ` [PATCH v3 1/7] dt-bindings: lcdif: add compatible string for i.MX8QXP and i.MX8DXL Frank.Li
2026-10-21 8:20 ` Liu Ying
2026-10-23 9:28 ` Krzysztof Kozlowski
2026-10-20 20:12 ` [PATCH v3 2/7] dt-bindings: display: simple: Add waiken,101wx001-wct Frank.Li
2026-10-21 8:22 ` Liu Ying
2026-10-23 9:29 ` Krzysztof Kozlowski
2026-10-20 20:12 ` [PATCH v3 3/7] drm/panel: simple: Add Waiken WKS101WX001-WCT panel support Frank.Li
2026-10-21 8:25 ` Liu Ying
2026-10-20 20:12 ` [PATCH v3 4/7] arm64: dts: imx8-ss-dma: Add lcdif support for i.MX8QXP and i.MX8DXL Frank.Li
2026-10-20 20:12 ` Frank.Li [this message]
2026-10-21 8:29 ` [PATCH v3 5/7] arm64: dts: imx8dxl-evk: Add onboard GPIO mux controller Liu Ying
2026-10-20 20:12 ` [PATCH v3 6/7] arm64: dts: imx8dxl-evk: Move ACM MCLK pin to ACM pinctrl Frank.Li
2026-10-21 8:31 ` Liu Ying
2026-10-20 20:12 ` [PATCH v3 7/7] arm64: dts: imx8dxl-evk: add lcdif overlay Frank.Li
2026-10-21 8:34 ` Liu Ying
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261020-dxl_lcdif-v3-5-adc944659e14@nxp.com \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=jesszhan0024@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=marex@denx.de \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robert.chiras@nxp.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sam@ravnborg.org \
--cc=simona@ffwll.ch \
--cc=stefan@agner.ch \
--cc=thierry.reding@gmail.com \
--cc=tzimmermann@suse.de \
--cc=victor.liu@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®