From: Jacky Chou <jacky_chou@aspeedtech.com>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Po-Yu Chuang <ratbert@faraday-tech.com>,
Eric Dumazet <edumazet@kernel.org>,
"Heiner Kallweit" <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
"Eric Dumazet" <edumazet@kernel.org>
Cc: <netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
Jacky Chou <jacky_chou@aspeedtech.com>
Subject: [PATCH net-next v4 1/7] dt-bindings: net: ftgmac100: Make Aspeed compatibles standalone
Date: Tue, 20 Oct 2026 19:34:12 +0800 [thread overview]
Message-ID: <20261020-support_ast2700-v4-1-4d36b40939b3@aspeedtech.com> (raw)
In-Reply-To: <20261020-support_ast2700-v4-0-4d36b40939b3@aspeedtech.com>
The aspeed,ast2400-mac, aspeed,ast2500-mac, and aspeed,ast2600-mac
compatibles are currently only valid when paired with the generic
"faraday,ftgmac100" fallback: if a node ever bound through the
generic entry alone, ftgmac100_probe() would set
rxdes0_edorr_mask/txdes0_edotr_mask to BIT(15) instead of the Aspeed
BIT(30), skip Aspeed clock setup, and leave the DMA mask too narrow.
Make each of them a standalone compatible instead, so none of the
Aspeed compatibles require the generic fallback alongside them.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
ftgmac100_of_match[] has had dedicated entries for AST2400, AST2500,
and AST2600 since commit 03a2aba50b2c ("net: ftgmac100: List all
compatibles"), so there is no known kernel + devicetree combination
where a node has actually bound through the generic entry and gotten
the wrong EDORR bit. This part is a binding correctness fix, not a fix
for an observed failure.
Note that arch/arm/boot/dts/aspeed/aspeed-g4.dtsi, aspeed-g5.dtsi, and
aspeed-g6.dtsi still declare their MAC nodes with the two-string
"aspeed,astXXXX-mac", "faraday,ftgmac100" compatible, so this will make
dtbs_check warn against those files until the redundant fallback
compatible is dropped there as well. That .dtsi change will be sent as
a separate series through the Aspeed/arm-soc tree, since dt-bindings
changes don't go through that tree.
---
.../devicetree/bindings/net/faraday,ftgmac100.yaml | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
index d14410018bcf..c870dd0bda7b 100644
--- a/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
+++ b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
@@ -13,12 +13,10 @@ properties:
compatible:
oneOf:
- const: faraday,ftgmac100
- - items:
- - enum:
- - aspeed,ast2400-mac
- - aspeed,ast2500-mac
- - aspeed,ast2600-mac
- - const: faraday,ftgmac100
+ - enum:
+ - aspeed,ast2400-mac
+ - aspeed,ast2500-mac
+ - aspeed,ast2600-mac
reg:
maxItems: 1
@@ -94,14 +92,14 @@ unevaluatedProperties: false
examples:
- |
ethernet@1e660000 {
- compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+ compatible = "aspeed,ast2500-mac";
reg = <0x1e660000 0x180>;
interrupts = <2>;
use-ncsi;
};
ethernet@1e680000 {
- compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+ compatible = "aspeed,ast2500-mac";
reg = <0x1e680000 0x180>;
interrupts = <2>;
--
2.34.1
next prev parent reply other threads:[~2026-10-20 11:34 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-20 11:34 [PATCH net-next v4 0/7] net: ftgmac100: Add AST2700 support Jacky Chou
2026-10-20 11:34 ` Jacky Chou [this message]
2026-10-20 18:14 ` [PATCH net-next v4 1/7] dt-bindings: net: ftgmac100: Make Aspeed compatibles standalone Rob Herring
2026-10-20 11:34 ` [PATCH net-next v4 2/7] dt-bindings: net: ftgmac100: Add AST2700 compatible Jacky Chou
2026-10-20 18:11 ` Rob Herring (Arm)
2026-10-20 11:34 ` [PATCH net-next v4 3/7] net: ftgmac100: Add AST2700 compatible support Jacky Chou
2026-10-20 11:34 ` [PATCH net-next v4 4/7] net: ftgmac100: Enable AST2700 RMII support Jacky Chou
2026-10-20 11:34 ` [PATCH net-next v4 5/7] net: ftgmac100: Require phy-mode for AST2700 Jacky Chou
2026-10-20 11:34 ` [PATCH net-next v4 6/7] net: ftgmac100: Add AST2700 upper DMA address support Jacky Chou
2026-10-20 11:34 ` [PATCH net-next v4 7/7] net: ftgmac100: Allow building on ARM64 Jacky Chou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261020-support_ast2700-v4-1-4d36b40939b3@aspeedtech.com \
--to=jacky_chou@aspeedtech.com \
--cc=andrew+netdev@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@kernel.org \
--cc=hkallweit1@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=ratbert@faraday-tech.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®