mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Grische <opensource@grische.xyz>
To: netdev@vger.kernel.org
Cc: maxime.chevallier@bootlin.com, andrew+netdev@lunn.ch,
	davem@davemloft.net, edumazet@kernel.org, kuba@kernel.org,
	pabeni@redhat.com, Oleksij Rempel <o.rempel@pengutronix.de>,
	Grische <opensource@grische.xyz>,
	stable@vger.kernel.org,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH net 3/3] net: stmmac: dwmac1000: stop hardware from dropping checksum-error packets
Date: Tue, 20 Oct 2026 21:03:18 +0200	[thread overview]
Message-ID: <20261020190319.884375-4-opensource@grische.xyz> (raw)
In-Reply-To: <20261020190319.884375-1-opensource@grische.xyz>

When the checksum offload engine (CoE) is enabled, the dwmac1000 MAC
silently drops any frame for which the engine detects a checksum error,
before the driver sees it.

This breaks VXLAN over IPv6 with zero UDP checksums, which RFC 6935 and
RFC 6936 allow for tunnels.

Set DMA_CONTROL_DT so that such frames are delivered instead of dropped,
as commit fe4042797651 ("net: stmmac: dwmac4: stop hardware from
dropping checksum-error packets") did for dwmac4. CoE remains enabled,
so the driver still sees the error status and marks the skb
CHECKSUM_NONE for the stack to verify.

Tested on an Aruba AP-325 (ipq806x-gmac-dwmac) with Rx checksum offload
on.

Link: https://lore.kernel.org/all/20250625132117.1b3264e8@kernel.org/
Link: https://github.com/freifunk-gluon/gluon/issues/3783
Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.")
Cc: <stable@vger.kernel.org> # 6.6.x: ee0aace5f844: net: stmmac: Correctly handle Rx checksum offload errors
Cc: <stable@vger.kernel.org> # 6.6.x
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Grische <opensource@grische.xyz>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac1000.h     | 1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
index 1de1f929d61c..004e6e30a68b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
@@ -163,6 +163,7 @@ enum rx_tx_priority_ratio {
 
 /* DMA operation mode defines (start/stop tx/rx are placed in common header)*/
 /* Disable Drop TCP/IP csum error */
+#define DMA_CONTROL_DT		0x04000000
 #define DMA_CONTROL_RSF		0x02000000	/* Receive Store and Forward */
 #define DMA_CONTROL_DFF		0x01000000	/* Disaable flushing */
 /* Threshold for Activating the FC */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
index 3ac7a7949529..00c8d4dfb553 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -129,6 +129,8 @@ static void dwmac1000_dma_operation_mode_rx(struct stmmac_priv *priv,
 {
 	u32 csr6 = readl(ioaddr + DMA_CHAN_CONTROL(channel));
 
+	csr6 |= DMA_CONTROL_DT;
+
 	if (mode == SF_DMA_MODE) {
 		pr_debug("GMAC: enable RX store and forward mode\n");
 		csr6 |= DMA_CONTROL_RSF | DMA_CONTROL_DFF;
-- 
2.54.0


      parent reply	other threads:[~2026-10-20 19:03 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20261020190319.884375-1-opensource@grische.xyz>
2026-10-20 19:03 ` [PATCH net 1/3] net: stmmac: honour Rx checksum errors in the AF_XDP zero-copy path Grische
2026-10-20 19:03 ` [PATCH net 2/3] net: stmmac: dwmac1000: don't discard frames with only a checksum error Grische
2026-10-20 19:03 ` Grische [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261020190319.884375-4-opensource@grische.xyz \
    --to=opensource@grische.xyz \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=maxime.chevallier@bootlin.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=o.rempel@pengutronix.de \
    --cc=pabeni@redhat.com \
    --cc=peppe.cavallaro@st.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®