From: Lee Jones <lee@kernel.org>
To: lee@kernel.org, Pavel Machek <pavel@kernel.org>,
Nate Case <ncase@xes-inc.com>,
Eddie James <eajames@linux.ibm.com>,
linux-leds@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Subject: [PATCH 05/21] leds: pca955x: Take a reference on the child firmware node
Date: Wed, 21 Oct 2026 12:32:14 +0000 [thread overview]
Message-ID: <20261021123406.3163547-6-lee@kernel.org> (raw)
In-Reply-To: <20261021123406.3163547-1-lee@kernel.org>
pca955x_get_pdata() caches each child fwnode in led->fwnode while
iterating over the device's child nodes with
device_for_each_child_node(), which drops its reference on each child
node when advancing to the next iteration or finishing the loop.
Because the LED core stores init_data.fwnode via device_set_node()
without taking an additional reference of its own, dynamically
allocated firmware nodes can be freed before or while the LED class
device uses them.
Acquire a reference with fwnode_handle_get() when caching child in
led->fwnode and register a devm action to release it when the device is
unbound or probe fails.
Fixes: 7c4815929276 ("leds: pca955x: Let the core process the fwnode")
Closes: https://sashiko.dev/#/bug/linux-a78a30d3-e8c1-43eb-af6c-c26279dc21e7
Cc: stable@vger.kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
---
drivers/leds/leds-pca955x.c | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/drivers/leds/leds-pca955x.c b/drivers/leds/leds-pca955x.c
index 273383351ba0..70043e0e6f08 100644
--- a/drivers/leds/leds-pca955x.c
+++ b/drivers/leds/leds-pca955x.c
@@ -530,12 +530,16 @@ static int pca955x_gpio_direction_output(struct gpio_chip *gc,
}
#endif /* CONFIG_LEDS_PCA955X_GPIO */
+static void pca955x_fwnode_put(void *data)
+{
+ fwnode_handle_put(data);
+}
+
static struct pca955x_platform_data *
pca955x_get_pdata(struct i2c_client *client, const struct pca955x_chipdef *chip)
{
struct pca955x_platform_data *pdata;
struct pca955x_led *led;
- struct fwnode_handle *child;
int count;
count = device_get_child_node_count(&client->dev);
@@ -552,7 +556,7 @@ pca955x_get_pdata(struct i2c_client *client, const struct pca955x_chipdef *chip)
if (!pdata->leds)
return ERR_PTR(-ENOMEM);
- device_for_each_child_node(&client->dev, child) {
+ device_for_each_child_node_scoped(&client->dev, child) {
u32 reg;
int res;
@@ -561,8 +565,17 @@ pca955x_get_pdata(struct i2c_client *client, const struct pca955x_chipdef *chip)
continue;
led = &pdata->leds[reg];
+ if (led->fwnode)
+ devm_release_action(&client->dev, pca955x_fwnode_put,
+ led->fwnode);
led->type = PCA955X_TYPE_LED;
- led->fwnode = child;
+ led->fwnode = fwnode_handle_get(child);
+
+ res = devm_add_action_or_reset(&client->dev, pca955x_fwnode_put,
+ led->fwnode);
+ if (res)
+ return ERR_PTR(res);
+
led->default_state = led_init_default_state_get(child);
fwnode_property_read_u32(child, "type", &led->type);
--
2.56.0.218.g1ec904b173-goog
next prev parent reply other threads:[~2026-10-21 12:34 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-21 12:32 [PATCH 00/21] leds: Assorted bug fixes across core, flash, trigger, and drivers Lee Jones
2026-10-21 12:32 ` [PATCH 01/21] leds: lm3532: Propagate error from devm_regulator_get() Lee Jones
2026-10-21 12:32 ` [PATCH 02/21] leds: lm3532: Use dev_err_probe() when lm3532_parse_node() fails Lee Jones
2026-10-21 12:32 ` [PATCH 03/21] leds: trigger: netdev: Hold RTNL lock across hw_control_get_device() in activate Lee Jones
2026-10-21 12:32 ` [PATCH 04/21] leds: aw2013: Guard LED array index in aw2013_probe_dt() Lee Jones
2026-10-21 12:32 ` Lee Jones [this message]
2026-10-21 12:32 ` [PATCH 06/21] leds: lp50xx: Guard sub-LED count in lp50xx_probe_dt() Lee Jones
2026-10-21 12:32 ` [PATCH 07/21] leds: trigger: netdev: Serialise work cancellation and state updates Lee Jones
2026-10-21 12:32 ` [PATCH 08/21] leds: sgm3140: Replace powerdown timer with delayed work Lee Jones
2026-10-21 12:32 ` [PATCH 09/21] leds: sgm3140: Cancel powerdown work via devres after LED unregistration Lee Jones
2026-10-21 12:32 ` [PATCH 10/21] leds: class: Initialise trigger_lock before exposing sysfs attributes Lee Jones
2026-10-21 12:32 ` [PATCH 11/21] leds: class: Unlock led_access before unregistering device on error Lee Jones
2026-10-21 12:32 ` [PATCH 12/21] leds: aat1290: Retain child device_node reference for device lifetime Lee Jones
2026-10-21 12:32 ` [PATCH 13/21] leds: aat1290: Prevent out-of-bounds read in aat1290_brightness_to_intensity() Lee Jones
2026-10-21 12:32 ` [PATCH 14/21] leds: flash: Avoid divide-by-zero in led_clamp_align() Lee Jones
2026-10-21 12:32 ` [PATCH 15/21] leds: lm3532: Validate LED string indices in lm3532_parse_node() Lee Jones
2026-10-21 12:32 ` [PATCH 16/21] leds: lm3532: Clamp full-scale current to minimum bound Lee Jones
2026-10-21 12:32 ` [PATCH 17/21] leds: aat1290: Avoid leaking devres pinctrl handles on strobe source changes Lee Jones
2026-10-21 12:32 ` [PATCH 18/21] leds: aw2013: Unlock chip mutex before registering LEDs Lee Jones
2026-10-21 12:32 ` [PATCH 19/21] leds: is31fl32xx: Clamp channel current limit in is31fl3293_reset() Lee Jones
2026-10-21 12:32 ` [PATCH 20/21] leds: flash: Terminate sysfs_groups array with NULL Lee Jones
2026-10-21 12:32 ` [PATCH 21/21] leds: lm3692x: Use devm_mutex_init() to avoid premature mutex destruction Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261021123406.3163547-6-lee@kernel.org \
--to=lee@kernel.org \
--cc=eajames@linux.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=ncase@xes-inc.com \
--cc=pavel@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®