[PATCH 1/2] ARM: dts: imx6ull-dhcor-maveo-box: Remove unused SPI device

[Christoph Niedermaier <cniedermaier@dh-electronics.com>]

On the maveo box, the SPI pins are connected to connector X10,
but no device is connected. The device "dhcom-board" was used
only to test the hardware, but was not removed afterward. So
remove this device to accurately represent the current hardware
configuration here.

Fixes: 145e2732a5e9 ("ARM: dts: imx6ull-dhcor: Add Marantec maveo box")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
---
Cc: Rob Herring <robh@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Frank Li <Frank.Li@nxp.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Marek Vasut <marex@nabladev.com>
Cc: devicetree@vger.kernel.org
Cc: imx@lists.linux.dev
Cc: kernel@dh-electronics.com
Cc: linux-kernel@vger.kernel.org
---
 arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts
index 047f7b2d8526..eb0b91040110 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts
@@ -60,14 +60,6 @@ &ecspi4 {
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	pinctrl-names = "default";
 	status = "okay";
-
-	spidev@0 {
-		compatible = "dh,dhcom-board";
-		reg = <0>;
-		spi-cpha;
-		spi-cpol;
-		spi-max-frequency = <54000000>;
-	};
 };
 
 &gpio1 {
-- 
2.30.2