mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Mukesh Kumar Chaurasiya (IBM)" <mkchauras@gmail.com>
To: maddy@linux.ibm.com, mpe@ellerman.id.au, npiggin@gmail.com,
	chleroy@kernel.org, ritesh.list@gmail.com, sshegde@linux.ibm.com,
	mkchauras@gmail.com, msuchanek@suse.de,
	akpm@linux-foundation.org, yeoreum.yun@arm.com,
	agordeev@linux.ibm.com, mchauras@linux.ibm.com,
	bwiedemann@suse.de, linuxppc-dev@lists.ozlabs.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] powerpc: Support for generic tif bits
Date: Wed, 21 Oct 2026 20:14:54 +0530	[thread overview]
Message-ID: <20261021144453.232372-2-mkchauras@gmail.com> (raw)

After the support of generic irq entry/exit. powerpc is now ready to
use generic tif bits instead of arch specific ones.

Enable generic tif bits for powerpc arch.

Signed-off-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
---
This patch is applicabe over
https://lore.kernel.org/all/961c058f3f3e03045552186c083a68a0fde3f43f.1791975972.git.msuchanek@suse.de/

 arch/powerpc/Kconfig                   |  1 +
 arch/powerpc/include/asm/thread_info.h | 36 +++++++++-----------------
 2 files changed, 13 insertions(+), 24 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 7f7910f38a67..e5527b56159a 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -255,6 +255,7 @@ config PPC
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER		if !COMPILE_TEST && (PPC64 || (PPC32 && CC_IS_GCC))
 	select HAVE_GCC_PLUGINS
+	select HAVE_GENERIC_TIF_BITS
 	select HAVE_HARDLOCKUP_DETECTOR_ARCH	if PPC_BOOK3S_64 && SMP
 	select HAVE_HARDLOCKUP_DETECTOR_PERF	if PERF_EVENTS && HAVE_PERF_EVENTS_NMI
 	select HAVE_HW_BREAKPOINT		if PERF_EVENTS && (PPC_BOOK3S || PPC_8xx)
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index 4b7ec1db3034..4df3f4b5bd56 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -93,44 +93,32 @@ void arch_setup_new_exec(void);
 
 #endif /* __ASSEMBLER__ */
 
+#define HAVE_TIF_NEED_RESCHED_LAZY
+
+#include <asm-generic/thread_info_tif.h>
 /*
  * thread information flag bit numbers
  */
-#define TIF_SIGPENDING		1	/* signal pending */
-#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_NOTIFY_SIGNAL	3	/* signal notifications exist */
-#define TIF_RESTORE_TM		5	/* need to restore TM FP/VEC/VSX */
-#define TIF_PATCH_PENDING	6	/* pending live patching update */
-#define TIF_SINGLESTEP		8	/* singlestepping active */
-#define TIF_NEED_RESCHED_LAZY	9       /* Scheduler driven lazy preemption */
-#define TIF_RESTOREALL		11	/* Restore all regs (implies NOERROR) */
-#define TIF_NOERROR		12	/* Force successful syscall return */
-#define TIF_NOTIFY_RESUME	13	/* callback before returning to user */
-#define TIF_UPROBE		14	/* breakpointed or single-stepping */
-#define TIF_EMULATE_STACK_STORE	16	/* Is an instruction emulation
+#define TIF_RESTORE_TM		16	/* need to restore TM FP/VEC/VSX */
+#define TIF_SINGLESTEP		17	/* singlestepping active */
+#define TIF_RESTOREALL		18	/* Restore all regs (implies NOERROR) */
+#define TIF_NOERROR		19	/* Force successful syscall return */
+#define TIF_EMULATE_STACK_STORE	20	/* Is an instruction emulation
 						for stack store? */
-#define TIF_MEMDIE		17	/* is terminating due to OOM killer */
 #if defined(CONFIG_PPC64)
-#define TIF_ELF2ABI		18	/* function descriptors must die! */
+#define TIF_ELF2ABI		21	/* function descriptors must die! */
 #endif
-#define TIF_POLLING_NRFLAG	19	/* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_32BIT		20	/* 32 bit binary */
-#define TIF_SYSCALL_RET		21	/* syscall error value set */
+#define TIF_POLLING_NRFLAG	22	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_32BIT		23	/* 32 bit binary */
+#define TIF_SYSCALL_RET		24	/* syscall error value set */
 
 /* as above, but as bit values */
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_NEED_RESCHED_LAZY	(1<<TIF_NEED_RESCHED_LAZY)
-#define _TIF_NOTIFY_SIGNAL	(1<<TIF_NOTIFY_SIGNAL)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_32BIT		(1<<TIF_32BIT)
 #define _TIF_RESTORE_TM		(1<<TIF_RESTORE_TM)
-#define _TIF_PATCH_PENDING	(1<<TIF_PATCH_PENDING)
 #define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
 #define _TIF_RESTOREALL		(1<<TIF_RESTOREALL)
 #define _TIF_NOERROR		(1<<TIF_NOERROR)
-#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
-#define _TIF_UPROBE		(1<<TIF_UPROBE)
 #define _TIF_EMULATE_STACK_STORE	(1<<TIF_EMULATE_STACK_STORE)
 
 #define _TIF_USER_WORK_MASK	(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
-- 
2.55.0


                 reply	other threads:[~2026-10-21 14:45 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261021144453.232372-2-mkchauras@gmail.com \
    --to=mkchauras@gmail.com \
    --cc=agordeev@linux.ibm.com \
    --cc=akpm@linux-foundation.org \
    --cc=bwiedemann@suse.de \
    --cc=chleroy@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=maddy@linux.ibm.com \
    --cc=mchauras@linux.ibm.com \
    --cc=mpe@ellerman.id.au \
    --cc=msuchanek@suse.de \
    --cc=npiggin@gmail.com \
    --cc=ritesh.list@gmail.com \
    --cc=sshegde@linux.ibm.com \
    --cc=yeoreum.yun@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®