[PATCH 1/1] arm64: dts: freescale: ls208xa: correct USB compatible strings

[Frank.Li@oss.nxp.com]

From: Frank Li <Frank.Li@nxp.com>

Correct usb0 and usb1 compatible strings from generic "snps,dwc3"
to SoC-specific "fsl,ls208xa-dwc3" with "fsl,ls1028a-dwc3" fallback.

It requires updating the specific gsbuscfg0 value compared to the
generic snps,dwc3.

Depends on commit 1c97fc901fb6 ("usb: dwc3: dwc3-generic-plat: Add
layerscape dwc3 support").

Due to complex dts renaming, the Fixes tag below points to the first
commit where enable usb0 and usb1.

Fixes: ad5b6611e1574 ("arm64: dts: ls2081a-rdb: Add DTS for NXP LS2081ARDB")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index cc1a64e63ed55..3b0a26bf609cc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -1288,7 +1288,7 @@ bus: bus {
 			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
 
 			usb0: usb@3100000 {
-				compatible = "snps,dwc3";
+				compatible = "fsl,ls208xa-dwc3", "fsl,ls1028a-dwc3";
 				reg = <0x0 0x3100000 0x0 0x10000>;
 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
@@ -1299,7 +1299,7 @@ usb0: usb@3100000 {
 			};
 
 			usb1: usb@3110000 {
-				compatible = "snps,dwc3";
+				compatible = "fsl,ls208xa-dwc3", "fsl,ls1028a-dwc3";
 				reg = <0x0 0x3110000 0x0 0x10000>;
 				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
-- 
2.43.0