Re: [PATCH] usb: uas: wait for pending commands before unbinding

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

On Thu, Oct 22, 2026 at 08:34:01PM +0800, Jiayi Li wrote:
> USB core normally disables interface endpoints before calling
> uas_disconnect(). This cancels pending URBs while the device may still
> be processing the associated commands. Some storage bridges then stop
> responding after a driver rebind and need a disconnect and reconnect
> to recover.
> 
> Enable soft unbinding and block new SCSI requests before waiting for
> pending commands to finish. This keeps the endpoints available until
> the wait completes. Stop waiting when USB core marks the device as
> not attached, and continue with the existing cleanup on timeout.
> 
> Keep requests blocked when leaving the preparation step, including on
> timeout. Set resetting before unblocking the host so that queued
> requests cannot submit new URBs during teardown.
> 
> ---
> diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
> index 2651629..58a67d7 100644
> --- a/drivers/usb/storage/uas.c
> +++ b/drivers/usb/storage/uas.c
> @@ -9,6 +9,7 @@
>   */
>  
>  #include <linux/blkdev.h>
> +#include <linux/delay.h>
>  #include <linux/slab.h>
>  #include <linux/types.h>
>  #include <linux/module.h>
> @@ -1211,16 +1212,55 @@ static int uas_reset_resume(struct usb_interface *intf)
>  	return 0;
>  }
>  
> +static void uas_pre_disconnect(struct usb_interface *intf)
> +{
> +	struct Scsi_Host *shost = usb_get_intfdata(intf);
> +	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
> +	unsigned long flags, start_time;
> +
> +	spin_lock_irqsave(shost->host_lock, flags);
> +	scsi_block_requests(shost);
> +	spin_unlock_irqrestore(shost->host_lock, flags);
> +
> +	start_time = jiffies;
> +	for (;;) {
> +		if (READ_ONCE(devinfo->udev->state) == USB_STATE_NOTATTACHED)
> +			return;
> +
> +		flush_work(&devinfo->work);
> +
> +		if (!usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000))
> +			break;
> +
> +		if (!usb_wait_anchor_empty_timeout(&devinfo->data_urbs, 500))
> +			break;
> +
> +		if (time_after(jiffies, start_time + 5 * HZ))
> +			break;
> +		if (uas_cmnd_list_empty(devinfo))
> +			return;
> +
> +		msleep(20);
> +	}
> +
> +	shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
> +}
> +
>  static void uas_disconnect(struct usb_interface *intf)
>  {
>  	struct Scsi_Host *shost = usb_get_intfdata(intf);
>  	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
>  	unsigned long flags;
>  
> +	uas_pre_disconnect(intf);
> +
>  	spin_lock_irqsave(&devinfo->lock, flags);
>  	devinfo->resetting = 1;
>  	spin_unlock_irqrestore(&devinfo->lock, flags);
>  
> +	if (shost->host_self_blocked)
> +		scsi_unblock_requests(shost);
> +
>  	cancel_work_sync(&devinfo->work);
>  	usb_kill_anchored_urbs(&devinfo->cmd_urbs);
>  	usb_kill_anchored_urbs(&devinfo->sense_urbs);
> @@ -1260,6 +1300,7 @@ static void uas_shutdown(struct usb_interface *intf)
>  
>  static struct usb_driver uas_driver = {
>  	.name = "uas",
> +	.soft_unbind = 1,
>  	.probe = uas_probe,
>  	.disconnect = uas_disconnect,
>  	.pre_reset = uas_pre_reset,

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
a patch that has triggered this response.  He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created.  Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- Your patch does not have a Signed-off-by: line.  Please read the
  kernel file, Documentation/process/submitting-patches.rst and resend
  it after adding that line.  Note, the line needs to be in the body of
  the email, before the patch, not at the bottom of the patch or in the
  email signature.


If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot