Re: [PATCH net v6] net: dsa: qca8k: preserve port state across MTU changes

[Yongzhao Chen <yongzhao.derek@gmail.com>]

On Thu, 22 Oct 2026 08:37:21 +0000 netdev-bot+sashiko@kernel.org wrote:
> Can this write bits outside of mask into PORT_STATUS?

Yes. The qca8k regmap passes the raw value to its update_bits callbacks,
which OR write_val without masking it. My previous register model
applied val & mask and hid this difference. v7 passes
port_status_value[port] & mask for partial updates.

> If ports 0 and 6 are both CPU ports, can qca8k_port_change_mtu() return
> an error after the frame size has already been committed?

Yes. My previous test called the driver once per MTU change instead of
going through dsa_switch_mtu(), which calls it for every CPU port. v7
records the committed frame size and returns success for a repeated
request with the same value, so the second CPU port cannot reject the
first port's commit.

The NULL PHY call in qca8k_port_enable() is already present in the v6
base. From the source, a user port without an attached PHY reaches it,
but I found no in-tree qca8k DTS with such a user port. It is
independent of this MTU change, so v7 leaves it alone. If it is fixed
later, dropping the call looks better than a NULL check:
phylink_bringup_phy() already calls phy_support_asym_pause() for every
PHY it attaches.

v7: https://lore.kernel.org/netdev/20261022155837.760-1-yongzhao.derek@gmail.com/

Yongzhao Chen

pw-bot: cr