From: Christian Marangi <ansuelsmth@gmail.com>
To: Christian Marangi <ansuelsmth@gmail.com>,
Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net v2 3/4] net: phy: as21xxx: force C45 OPs for AUTONEG
Date: Fri, 23 Oct 2026 00:29:53 +0200 [thread overview]
Message-ID: <20261022222955.698722-3-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20261022222955.698722-1-ansuelsmth@gmail.com>
With further testing with 2.5G NIC, it was discovered that the PHY
require the C45 OPs to configure and restart ANEG or speed higher than
1G doesn't function correctly.
To force C45 OPs with generic PHY function, clear the C22 bit from
devices_in_package bitmask and implement a custom .config_aneg.
Fixes: 830877d89edc ("net: phy: Add support for Aeonsemi AS21xxx PHYs")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
Changes v2:
- Implement custom config_aneg
drivers/net/phy/as21xxx.c | 43 +++++++++++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/drivers/net/phy/as21xxx.c b/drivers/net/phy/as21xxx.c
index 519b78d3579d..e2988cb10c04 100644
--- a/drivers/net/phy/as21xxx.c
+++ b/drivers/net/phy/as21xxx.c
@@ -616,6 +616,13 @@ static int as21xxx_probe(struct phy_device *phydev)
if (ret)
return ret;
+ /* Even if PHY declare support for Clause 22 register,
+ * Clause 45 register should be used for ANEG configuration
+ * and restart. Clear the C22 bit for devices_in_package to
+ * force C45 generic OPs in generic PHY ANGE OPs.
+ */
+ phydev->c45_ids.devices_in_package &= ~BIT(0);
+
ret = aeon_ipc_sync_parity(phydev, priv);
if (ret)
return ret;
@@ -633,6 +640,32 @@ static int as21xxx_probe(struct phy_device *phydev)
return aeon_dpc_ra_enable(phydev);
}
+static int as21xxx_config_aneg(struct phy_device *phydev)
+{
+ bool changed = false;
+ int ret;
+ u16 adv;
+
+ ret = genphy_c45_an_config_aneg(phydev);
+ if (ret < 0)
+ return ret;
+ if (ret > 0)
+ changed = true;
+
+ adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
+
+ ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN,
+ AS21XXX_MDIO_AN_C22 + MII_CTRL1000,
+ ADVERTISE_1000FULL |
+ ADVERTISE_1000HALF, adv);
+ if (ret < 0)
+ return ret;
+ if (ret > 0)
+ changed = true;
+
+ return genphy_c45_check_and_restart_aneg(phydev, changed);
+}
+
static int as21xxx_read_link(struct phy_device *phydev, int *bmcr)
{
int status;
@@ -990,6 +1023,7 @@ static struct phy_driver as21xxx_drivers[] = {
.name = "Aeonsemi AS21011JB1",
.probe = as21xxx_probe,
.match_phy_device = as21xxx_match_phy_device,
+ .config_aneg = as21xxx_config_aneg,
.read_status = as21xxx_read_status,
.led_brightness_set = as21xxx_led_brightness_set,
.led_hw_is_supported = as21xxx_led_hw_is_supported,
@@ -1002,6 +1036,7 @@ static struct phy_driver as21xxx_drivers[] = {
.name = "Aeonsemi AS21011PB1",
.probe = as21xxx_probe,
.match_phy_device = as21xxx_match_phy_device,
+ .config_aneg = as21xxx_config_aneg,
.read_status = as21xxx_read_status,
.led_brightness_set = as21xxx_led_brightness_set,
.led_hw_is_supported = as21xxx_led_hw_is_supported,
@@ -1014,6 +1049,7 @@ static struct phy_driver as21xxx_drivers[] = {
.name = "Aeonsemi AS21010PB1",
.probe = as21xxx_probe,
.match_phy_device = as21xxx_match_phy_device,
+ .config_aneg = as21xxx_config_aneg,
.read_status = as21xxx_read_status,
.led_brightness_set = as21xxx_led_brightness_set,
.led_hw_is_supported = as21xxx_led_hw_is_supported,
@@ -1026,6 +1062,7 @@ static struct phy_driver as21xxx_drivers[] = {
.name = "Aeonsemi AS21010JB1",
.probe = as21xxx_probe,
.match_phy_device = as21xxx_match_phy_device,
+ .config_aneg = as21xxx_config_aneg,
.read_status = as21xxx_read_status,
.led_brightness_set = as21xxx_led_brightness_set,
.led_hw_is_supported = as21xxx_led_hw_is_supported,
@@ -1038,6 +1075,7 @@ static struct phy_driver as21xxx_drivers[] = {
.name = "Aeonsemi AS21210PB1",
.probe = as21xxx_probe,
.match_phy_device = as21xxx_match_phy_device,
+ .config_aneg = as21xxx_config_aneg,
.read_status = as21xxx_read_status,
.led_brightness_set = as21xxx_led_brightness_set,
.led_hw_is_supported = as21xxx_led_hw_is_supported,
@@ -1050,6 +1088,7 @@ static struct phy_driver as21xxx_drivers[] = {
.name = "Aeonsemi AS21510JB1",
.probe = as21xxx_probe,
.match_phy_device = as21xxx_match_phy_device,
+ .config_aneg = as21xxx_config_aneg,
.read_status = as21xxx_read_status,
.led_brightness_set = as21xxx_led_brightness_set,
.led_hw_is_supported = as21xxx_led_hw_is_supported,
@@ -1062,6 +1101,7 @@ static struct phy_driver as21xxx_drivers[] = {
.name = "Aeonsemi AS21510PB1",
.probe = as21xxx_probe,
.match_phy_device = as21xxx_match_phy_device,
+ .config_aneg = as21xxx_config_aneg,
.read_status = as21xxx_read_status,
.led_brightness_set = as21xxx_led_brightness_set,
.led_hw_is_supported = as21xxx_led_hw_is_supported,
@@ -1074,6 +1114,7 @@ static struct phy_driver as21xxx_drivers[] = {
.name = "Aeonsemi AS21511JB1",
.probe = as21xxx_probe,
.match_phy_device = as21xxx_match_phy_device,
+ .config_aneg = as21xxx_config_aneg,
.read_status = as21xxx_read_status,
.led_brightness_set = as21xxx_led_brightness_set,
.led_hw_is_supported = as21xxx_led_hw_is_supported,
@@ -1086,6 +1127,7 @@ static struct phy_driver as21xxx_drivers[] = {
.name = "Aeonsemi AS21210JB1",
.probe = as21xxx_probe,
.match_phy_device = as21xxx_match_phy_device,
+ .config_aneg = as21xxx_config_aneg,
.read_status = as21xxx_read_status,
.led_brightness_set = as21xxx_led_brightness_set,
.led_hw_is_supported = as21xxx_led_hw_is_supported,
@@ -1098,6 +1140,7 @@ static struct phy_driver as21xxx_drivers[] = {
.name = "Aeonsemi AS21511PB1",
.probe = as21xxx_probe,
.match_phy_device = as21xxx_match_phy_device,
+ .config_aneg = as21xxx_config_aneg,
.read_status = as21xxx_read_status,
.led_brightness_set = as21xxx_led_brightness_set,
.led_hw_is_supported = as21xxx_led_hw_is_supported,
--
2.55.0
next prev parent reply other threads:[~2026-10-22 22:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-22 22:29 [PATCH net v2 1/4] net: phy: as21xxx: handle corner case with link and autoneg complete Christian Marangi
2026-10-22 22:29 ` [PATCH net v2 2/4] net: phy: as21xxx: fix read_status speed handling Christian Marangi
2026-10-22 22:29 ` Christian Marangi [this message]
2026-10-22 22:29 ` [PATCH net v2 4/4] net: phy: as21xxx: handle odd firmware on loading Christian Marangi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261022222955.698722-3-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®