[PATCH v1 1/5] dt-bindings: soc: cix: Describe the Sky1 AUDSS DMA IRQ controller

[Jelly Jia <Jelly.Jia@cixtech.com>]

The AUDSS CRU contains a separate AP interrupt gate for each of the eight
DMA-350 channels. The enabled inputs are combined onto one GIC interrupt.
These gates are part of the CRU register block, not the DMA controller.

Describe the CRU as an interrupt-controller in addition to its clock and
reset functions. A child interrupt specifier contains the DMA channel
index, matching the corresponding gate bit; the parent interrupt is the
combined GIC line.

Signed-off-by: Jelly Jia <Jelly.Jia@cixtech.com>
---
 .../bindings/soc/cix/cix,sky1-audss-cru.yaml  | 44 ++++++++++++++++++-
 1 file changed, 42 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/cix/cix,sky1-audss-cru.yaml b/Documentation/devicetree/bindings/soc/cix/cix,sky1-audss-cru.yaml
index 50dd0593e1d9..a296b59516f2 100644
--- a/Documentation/devicetree/bindings/soc/cix/cix,sky1-audss-cru.yaml
+++ b/Documentation/devicetree/bindings/soc/cix/cix,sky1-audss-cru.yaml
@@ -28,6 +28,12 @@ description: |
   The SoC syscon NoC (or bus) reset is described via resets. The audio
   subsystem power domain is described via power-domains.
 
+  The same register block contains the eight DMA-350 channel interrupt
+  gates at offset 0x54. When the node is an interrupt-controller, the
+  cell is the DMA channel index (0 through 7). The corresponding gate
+  bit is unmasked while that interrupt is requested, and the eight
+  inputs are combined onto the parent GIC interrupt.
+
 properties:
   compatible:
     const: cix,sky1-audss-cru
@@ -45,6 +51,18 @@ properties:
     description:
       Reset indices are defined in include/dt-bindings/reset/cix,sky1-audss-cru.h.
 
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+    description:
+      The cell is the DMA-350 channel index, 0 through 7.
+
+  interrupts:
+    maxItems: 1
+    description:
+      Combined DMA-350 channel interrupt after the CRU gates.
+
   clocks:
     items:
       - description: I2S parent clock for sampling rates multiple of 8kHz.
@@ -75,18 +93,40 @@ required:
   - power-domains
   - resets
 
+allOf:
+  - if:
+      required:
+        - interrupt-controller
+    then:
+      required:
+        - '#interrupt-cells'
+        - interrupts
+
 additionalProperties: false
 
 examples:
   - |
-    audss_cru: clock-controller@7110000 {
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gic: interrupt-controller {
+        #address-cells = <2>;
+        #interrupt-cells = <4>;
+        interrupt-controller;
+    };
+
+    clock-controller@7110000 {
         compatible = "cix,sky1-audss-cru";
         reg = <0x7110000 0x10000>;
         #clock-cells = <1>;
-        #reset-cells = <1>;
         clocks = <&scmi_clk 76>, <&scmi_clk 78>,
                  <&scmi_clk 70>, <&scmi_clk 71>;
         clock-names = "x8k", "x11k", "sys", "48m";
+        #interrupt-cells = <1>;
+        interrupt-controller;
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH 0>;
         power-domains = <&smc_devpd 0>;
+        #reset-cells = <1>;
         resets = <&s5_syscon 31>;
     };
-- 
2.54.0