From: Johan Hovold <johan@kernel.org>
To: Johan Hovold <johan@kernel.org>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org
Subject: [PATCH v2 07/12] USB: serial: io_edgeport: serialise MCR accesses
Date: Fri, 23 Oct 2026 14:15:25 +0200 [thread overview]
Message-ID: <20261023121530.186541-8-johan@kernel.org> (raw)
In-Reply-To: <20261023121530.186541-1-johan@kernel.org>
Add a mutex to serialise modem control register updates to prevent
concurrent tasks from interfering with each other.
Note that the register updates are currently asynchronous so a task may
read back a value which has not yet taken effect.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/usb/serial/io_edgeport.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 0fe7495c47f4..0fd68faa8427 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -168,6 +168,7 @@ struct edgeport_port {
struct urb *write_urb; /* write URB for this port */
bool write_in_progress; /* 'true' while a write URB is outstanding */
spinlock_t ep_lock;
+ struct mutex mutex;
__u8 shadowLCR; /* last LCR value received */
__u8 shadowMCR; /* last MCR value received */
@@ -877,7 +878,10 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
spin_unlock_irq(&edge_port->ep_lock);
/* Must always set this bit to enable ints! */
+ mutex_lock(&edge_port->mutex);
edge_port->shadowMCR = MCR_MASTER_IE;
+ mutex_unlock(&edge_port->mutex);
+
edge_port->chaseResponsePending = false;
/* send a open port command */
@@ -1398,9 +1402,11 @@ static void edge_throttle(struct tty_struct *tty)
/* if we are implementing RTS/CTS, toggle that line */
if (C_CRTSCTS(tty)) {
+ mutex_lock(&edge_port->mutex);
edge_port->shadowMCR &= ~MCR_RTS;
status = send_cmd_write_uart_register(edge_port, MCR,
edge_port->shadowMCR);
+ mutex_unlock(&edge_port->mutex);
if (status != 0)
return;
}
@@ -1435,9 +1441,11 @@ static void edge_unthrottle(struct tty_struct *tty)
}
/* if we are implementing RTS/CTS, toggle that line */
if (C_CRTSCTS(tty)) {
+ mutex_lock(&edge_port->mutex);
edge_port->shadowMCR |= MCR_RTS;
send_cmd_write_uart_register(edge_port, MCR,
edge_port->shadowMCR);
+ mutex_unlock(&edge_port->mutex);
}
}
@@ -1478,6 +1486,7 @@ static int edge_tiocmset(struct tty_struct *tty,
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
unsigned int mcr;
+ mutex_lock(&edge_port->mutex);
mcr = edge_port->shadowMCR;
if (set & TIOCM_RTS)
mcr |= MCR_RTS;
@@ -1496,6 +1505,7 @@ static int edge_tiocmset(struct tty_struct *tty,
edge_port->shadowMCR = mcr;
send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR);
+ mutex_unlock(&edge_port->mutex);
return 0;
}
@@ -1509,6 +1519,7 @@ static int edge_tiocmget(struct tty_struct *tty)
unsigned int mcr;
msr = edge_port->shadowMSR;
+ mutex_lock(&edge_port->mutex);
mcr = edge_port->shadowMCR;
result = ((mcr & MCR_DTR) ? TIOCM_DTR: 0) /* 0x002 */
| ((mcr & MCR_RTS) ? TIOCM_RTS: 0) /* 0x004 */
@@ -1516,6 +1527,7 @@ static int edge_tiocmget(struct tty_struct *tty)
| ((msr & EDGEPORT_MSR_CD) ? TIOCM_CAR: 0) /* 0x040 */
| ((msr & EDGEPORT_MSR_RI) ? TIOCM_RI: 0) /* 0x080 */
| ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */
+ mutex_unlock(&edge_port->mutex);
return result;
}
@@ -2430,12 +2442,14 @@ static void edge_set_termios(struct tty_struct *tty, struct usb_serial_port *por
return;
/* set up the MCR register and send it to the EdgePort */
+ mutex_lock(&edge_port->mutex);
edge_port->shadowMCR = MCR_MASTER_IE;
if (cflag & CBAUD)
edge_port->shadowMCR |= (MCR_DTR | MCR_RTS);
status = send_cmd_write_uart_register(edge_port, MCR,
edge_port->shadowMCR);
+ mutex_unlock(&edge_port->mutex);
if (status != 0)
return;
@@ -2930,6 +2944,7 @@ static int edge_port_probe(struct usb_serial_port *port)
return -ENOMEM;
spin_lock_init(&edge_port->ep_lock);
+ mutex_init(&edge_port->mutex);
init_waitqueue_head(&edge_port->wait_open);
init_waitqueue_head(&edge_port->wait_chase);
--
2.55.0
next prev parent reply other threads:[~2026-10-23 12:16 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-23 12:15 [PATCH v2 00/12] USB: serial: io_edgeport: fixes and sync commands Johan Hovold
2026-10-23 12:15 ` [PATCH v2 01/12] USB: serial: io_edgeport: fix NULL-deref on early status Johan Hovold
2026-10-23 12:15 ` [PATCH v2 02/12] USB: serial: io_edgeport: fix potential close() use-after-free Johan Hovold
2026-10-23 12:15 ` [PATCH v2 03/12] USB: serial: io_edgeport: fix potential NULL-deref at open Johan Hovold
2026-10-23 12:15 ` [PATCH v2 04/12] USB: serial: io_edgeport: move initial termios update to open() Johan Hovold
2026-10-23 12:15 ` [PATCH v2 05/12] USB: serial: io_edgeport: fix potential fifo corruption Johan Hovold
2026-10-23 12:15 ` [PATCH v2 06/12] USB: serial: io_edgeport: fix potential use-after-free on disconnect Johan Hovold
2026-10-23 12:15 ` Johan Hovold [this message]
2026-10-23 12:15 ` [PATCH v2 08/12] USB: serial: io_edgeport: drop redundant sanity checks Johan Hovold
2026-10-23 12:15 ` [PATCH v2 09/12] USB: serial: io_edgeport: drop redundant open " Johan Hovold
2026-10-23 12:15 ` [PATCH v2 10/12] USB: serial: io_edgeport: deassert DTR/RTS on close() and B0 Johan Hovold
2026-10-23 12:15 ` [PATCH v2 11/12] USB: serial: io_edgeport: replace atomic command allocations Johan Hovold
2026-10-23 12:15 ` [PATCH v2 12/12] USB: serial: io_edgeport: switch to synchronous commands Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261023121530.186541-8-johan@kernel.org \
--to=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®