[PATCH] platform/x86: hp-wmi: fix platform profile values for Victus 15-fb0xxx (8A3D)

[Sourav Nayak <nonameblank007@gmail.com>]

Currently Victus 15-fb0xxx (8A3D) takes victus_s_thermal_params,
which causes it to register as incorrect EC layout while cold boot.

- On other hand windows Omen Gaming Hub registers EC offset as 0x95,
- which is set in driver as HP_OMEN_EC_THERMAL_PROFILE_OFFSET.
- So, address it by adding victus_s_ec_thermal_params.

- Also perfcontrol modes as performance (0x1), default (0x0), quiet
(0x3) registers. So, add support for quiet mode.

Also, hp_wmi_fan_speed_max_reset() caused fans to freeze during loads at
0RPM, introduce a 'if' statement to resolve it by calling hp_wmi_fan_speed_max_set(0),
and passing platform active again to reactive curves. Test data:

auto/max:
hp-isa-0000
Adapter: ISA adapter
fan1:        5400 RPM
fan2:        5200 RPM

mannual[255]:
hp-isa-0000
Adapter: ISA adapter
fan1:        5800 RPM
fan2:        5800 RPM

Tested-by: Sourav Nayak <nonameblank007@gmail.com>
Signed-off-by: Sourav Nayak <nonameblank007@gmail.com>
---
 drivers/platform/x86/hp/hp-wmi.c | 30 ++++++++++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/hp/hp-wmi.c b/drivers/platform/x86/hp/hp-wmi.c
index 615b4cf6fc45..c35bbe1427e3 100644
--- a/drivers/platform/x86/hp/hp-wmi.c
+++ b/drivers/platform/x86/hp/hp-wmi.c
@@ -121,6 +121,13 @@ static const struct thermal_profile_params victus_s_thermal_params = {
 	.ec_tp_offset	= HP_EC_OFFSET_UNKNOWN,
 };
 
+static const struct thermal_profile_params victus_s_ec_thermal_params = {
+	.performance	= HP_VICTUS_S_THERMAL_PROFILE_PERFORMANCE,
+	.balanced	= HP_VICTUS_S_THERMAL_PROFILE_DEFAULT,
+	.low_power	= HP_VICTUS_S_THERMAL_PROFILE_DEFAULT,
+	.ec_tp_offset	= HP_OMEN_EC_THERMAL_PROFILE_OFFSET,
+};
+
 static const struct thermal_profile_params omen_v1_thermal_params = {
 	.performance	= HP_OMEN_V1_THERMAL_PROFILE_PERFORMANCE,
 	.balanced	= HP_OMEN_V1_THERMAL_PROFILE_DEFAULT,
@@ -164,6 +171,11 @@ static const struct hp_wmi_board_params victus_s_board_params = {
 	.fan_profile		= &victus_s_fan_profile_params,
 };
 
+static const struct hp_wmi_board_params victus_s_ec_board_params = {
+	.thermal_profile	= &victus_s_ec_thermal_params,
+	.fan_profile		= &victus_s_fan_profile_params,
+};
+
 static const struct hp_wmi_board_params omen_v1_board_params = {
 	.thermal_profile	= &omen_v1_thermal_params,
 	.fan_profile		= &victus_s_fan_profile_params,
@@ -245,7 +257,7 @@ static const struct dmi_system_id hp_wmi_feature_boards[] __initconst = {
 	},
 	{
 		.matches = { DMI_MATCH(DMI_BOARD_NAME, "8A3D") },
-		.driver_data = (void *)&victus_s_board_params,
+		.driver_data = (void *)&victus_s_ec_board_params,
 	},
 	{
 		.matches = { DMI_MATCH(DMI_BOARD_NAME, "8A44") },
@@ -2121,10 +2133,14 @@ static int platform_profile_victus_s_get_ec(enum platform_profile_option *profil
 	 * but logically it should have tp == 0x30 || tp == 0x31, as
 	 * corrected by the Omen Gaming Hub on windows. Hence accept both
 	 * of these values.
+	 * Since boards like 8A3D write 0x3 to EC offset 0x95 to
+	 * engage quiet mode. Map this to PLATFORM_PROFILE_LOW_POWER.
 	 */
 	if (tp == victus_s_thermal_params.performance ||
 	    tp == omen_v1_thermal_params.performance) {
 		*profile = PLATFORM_PROFILE_PERFORMANCE;
+	} else if (tp == HP_VICTUS_THERMAL_PROFILE_QUIET) {
+		*profile = PLATFORM_PROFILE_LOW_POWER;
 	} else if (tp == victus_s_thermal_params.balanced ||
 		   tp == omen_v1_thermal_params.balanced) {
 		/*
@@ -2657,7 +2673,17 @@ static int hp_wmi_apply_fan_settings(struct hp_wmi_hwmon_priv *priv)
 				 secs_to_jiffies(KEEP_ALIVE_DELAY_SECS));
 		return 0;
 	case PWM_MODE_AUTO:
-		if (hp_wmi_fan_control_supported()) {
+		/*
+		 * Victus models like 8A3D, calling hp_wmi_fan_speed_max_reset()
+		 * freezes fans at 0 RPM under load. Instead, disable max fans and re-apply
+		 * the active platform profile, so the EC firmware thermal curves regain control.
+		 */
+		if (hp_wmi_thermal_profile() == &victus_s_ec_thermal_params) {
+			ret = hp_wmi_fan_speed_max_set(0);
+			if (ret < 0)
+				return ret;
+			ret = platform_profile_victus_s_set_ec(active_platform_profile);
+		} else if (hp_wmi_fan_control_supported()) {
 			ret = hp_wmi_get_fan_count_userdefine_trigger();
 			if (ret < 0)
 				return ret;

base-commit: 5b0764a53235d3c77e1ed674e836e1b3fe1a4b1f
-- 
2.55.0