From: Jonathan Cameron <jic23@kernel.org>
To: Brian Norris <briannorris@chromium.org>
Cc: "Nuno Sá" <nuno.sa@analog.com>,
"Rafael J. Wysocki" <rafael@kernel.org>,
"Ulf Hansson" <ulfh@kernel.org>,
linux-pm@vger.kernel.org, "Andy Shevchenko" <andy@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 14/17] iio: light: pa12203001: Discard pm_runtime_put_autosuspend() return values
Date: Mon, 26 Oct 2026 01:08:40 +0000 [thread overview]
Message-ID: <20261026010840.57583c86@jic23-hlaptop> (raw)
In-Reply-To: <20261021165858.v2.14.I501510b542691f595de1e110cfe35632a5fa7768@changeid>
On Wed, 21 Oct 2026 16:57:15 -0700
Brian Norris <briannorris@chromium.org> wrote:
> This driver propagates the return value of pm_runtime_put_autosuspend(),
> which is not particularly useful.
>
> Returning an error code from pm_runtime_put_autosuspend() merely means
> that it has not queued up a timer or work item to check whether or not
> the device can be suspended and there are many perfectly valid
> situations in which that can happen, like after writing "on" to the
> device's runtime PM "control" attribute in sysfs for one example.
>
> For this reason, modify this driver to simply discard the
> pm_runtime_put_autosuspend() return value, and inline some of the
> runtime PM helper function, now that it behaves the same with and
> without CONFIG_PM.
>
> This will facilitate a planned change of the
> pm_runtime_put_autosuspend() return type to void in the future, similar
> to commit 3afd8df02433 ("PM: runtime: Change pm_runtime_put() return
> type to void").
>
> Signed-off-by: Brian Norris <briannorris@chromium.org>
Applied. Note I sent a follow up just now to use guard() on
the code that is visible in context here.
Thanks,
Jonathan
> ---
>
> Changes in v2:
> * Split iio patch into per-driver patches
> * Inlining
>
> drivers/iio/light/pa12203001.c | 26 +++++++++-----------------
> 1 file changed, 9 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/iio/light/pa12203001.c b/drivers/iio/light/pa12203001.c
> index c0f4db8d95f7..0a0502a60a06 100644
> --- a/drivers/iio/light/pa12203001.c
> +++ b/drivers/iio/light/pa12203001.c
> @@ -154,13 +154,12 @@ static inline int pa12203001_px_enable(struct pa12203001_data *data, u8 enable)
> return 0;
> }
>
> -static int pa12203001_set_power_state(struct pa12203001_data *data, bool on,
> - u8 mask)
> +static int pa12203001_runtime_resume_and_get(struct pa12203001_data *data, u8 mask)
> {
> #ifdef CONFIG_PM
> int ret;
>
> - if (on && (mask & PA12203001_ALS_EN_MASK)) {
> + if (mask & PA12203001_ALS_EN_MASK) {
> mutex_lock(&data->lock);
> if (data->px_enabled) {
> ret = pa12203001_als_enable(data,
> @@ -173,7 +172,7 @@ static int pa12203001_set_power_state(struct pa12203001_data *data, bool on,
> mutex_unlock(&data->lock);
> }
>
> - if (on && (mask & PA12203001_PX_EN_MASK)) {
> + if (mask & PA12203001_PX_EN_MASK) {
> mutex_lock(&data->lock);
> if (data->als_enabled) {
> ret = pa12203001_px_enable(data, PA12203001_PX_EN_MASK);
> @@ -185,10 +184,7 @@ static int pa12203001_set_power_state(struct pa12203001_data *data, bool on,
> mutex_unlock(&data->lock);
> }
>
> - if (on)
> - return pm_runtime_resume_and_get(&data->client->dev);
> -
> - return pm_runtime_put_autosuspend(&data->client->dev);
> + return pm_runtime_resume_and_get(&data->client->dev);
>
> err:
> mutex_unlock(&data->lock);
> @@ -213,7 +209,7 @@ static int pa12203001_read_raw(struct iio_dev *indio_dev,
> switch (chan->type) {
> case IIO_LIGHT:
> dev_mask = PA12203001_ALS_EN_MASK;
> - ret = pa12203001_set_power_state(data, true, dev_mask);
> + ret = pa12203001_runtime_resume_and_get(data, dev_mask);
> if (ret < 0)
> return ret;
> /*
> @@ -226,13 +222,11 @@ static int pa12203001_read_raw(struct iio_dev *indio_dev,
> goto reg_err;
>
> *val = le16_to_cpu(reg_word);
> - ret = pa12203001_set_power_state(data, false, dev_mask);
> - if (ret < 0)
> - return ret;
> + pm_runtime_put_autosuspend(&data->client->dev);
> break;
> case IIO_PROXIMITY:
> dev_mask = PA12203001_PX_EN_MASK;
> - ret = pa12203001_set_power_state(data, true, dev_mask);
> + ret = pa12203001_runtime_resume_and_get(data, dev_mask);
> if (ret < 0)
> return ret;
> ret = regmap_read(data->map, PA12203001_REG_PDH,
> @@ -241,9 +235,7 @@ static int pa12203001_read_raw(struct iio_dev *indio_dev,
> goto reg_err;
>
> *val = reg_byte;
> - ret = pa12203001_set_power_state(data, false, dev_mask);
> - if (ret < 0)
> - return ret;
> + pm_runtime_put_autosuspend(&data->client->dev);
> break;
> default:
> return -EINVAL;
> @@ -262,7 +254,7 @@ static int pa12203001_read_raw(struct iio_dev *indio_dev,
> }
>
> reg_err:
> - pa12203001_set_power_state(data, false, dev_mask);
> + pm_runtime_put_autosuspend(&data->client->dev);
> return ret;
> }
>
next prev parent reply other threads:[~2026-10-26 1:08 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-21 23:57 [PATCH v2 00/17] iio: Stop looking at pm_runtime_put_autosuspend() return codes Brian Norris
2026-10-21 23:57 ` [PATCH v2 01/17] iio: accel: fxls8962af: Discard pm_runtime_put_autosuspend() return values Brian Norris
2026-10-22 6:53 ` Andy Shevchenko
2026-10-22 17:51 ` Brian Norris
2026-10-23 3:29 ` Jonathan Cameron
2026-10-21 23:57 ` [PATCH v2 02/17] iio: accel: kxcjk-1013: " Brian Norris
2026-10-22 6:58 ` Andy Shevchenko
2026-10-23 3:36 ` Jonathan Cameron
2026-10-23 16:43 ` Brian Norris
2026-10-21 23:57 ` [PATCH v2 03/17] iio: accel: mma8452: " Brian Norris
2026-10-22 6:59 ` Andy Shevchenko
2026-10-21 23:57 ` [PATCH v2 04/17] iio: accel: mma955x: " Brian Norris
2026-10-21 23:57 ` [PATCH v2 05/17] iio: accel: bmc150: " Brian Norris
2026-10-21 23:57 ` [PATCH v2 06/17] iio: adc: rcar-gyroadc: " Brian Norris
2026-10-22 9:23 ` Geert Uytterhoeven
2026-10-26 3:28 ` Jonathan Cameron
2026-10-21 23:57 ` [PATCH v2 07/17] iio: adc: ti-ads1015: " Brian Norris
2026-10-26 3:27 ` Jonathan Cameron
2026-10-21 23:57 ` [PATCH v2 08/17] iio: chemical: atlas-sensor: " Brian Norris
2026-10-26 3:25 ` Jonathan Cameron
2026-10-21 23:57 ` [PATCH v2 09/17] iio: hid-sensors: " Brian Norris
2026-10-21 23:57 ` [PATCH v2 10/17] iio: gyro: bmg160: " Brian Norris
2026-10-21 23:57 ` [PATCH v2 11/17] iio: gyro: fxas21002c: " Brian Norris
2026-10-26 3:21 ` Jonathan Cameron
2026-10-21 23:57 ` [PATCH v2 12/17] iio: imu: kmx61: " Brian Norris
2026-10-26 1:13 ` Jonathan Cameron
2026-10-21 23:57 ` [PATCH v2 13/17] iio: light: apds9960: " Brian Norris
2026-10-21 23:57 ` [PATCH v2 14/17] iio: light: pa12203001: " Brian Norris
2026-10-26 1:08 ` Jonathan Cameron [this message]
2026-10-21 23:57 ` [PATCH v2 15/17] iio: light: rpr0521: " Brian Norris
2026-10-26 0:58 ` Jonathan Cameron
2026-10-21 23:57 ` [PATCH v2 16/17] iio: light: tsl2583: " Brian Norris
2026-10-26 0:55 ` Jonathan Cameron
2026-10-21 23:57 ` [PATCH v2 17/17] iio: light: us5182d: " Brian Norris
2026-10-26 0:53 ` Jonathan Cameron
2026-10-22 7:01 ` [PATCH v2 00/17] iio: Stop looking at pm_runtime_put_autosuspend() return codes Andy Shevchenko
2026-10-22 17:47 ` Brian Norris
2026-10-23 6:54 ` Andy Shevchenko
2026-10-23 16:43 ` Brian Norris
2026-10-26 10:09 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261026010840.57583c86@jic23-hlaptop \
--to=jic23@kernel.org \
--cc=andy@kernel.org \
--cc=briannorris@chromium.org \
--cc=dlechner@baylibre.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=rafael@kernel.org \
--cc=ulfh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®