From: Ragul Balaji <ragulbaby@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>,
Johannes Berg <johannes@sipsolutions.net>,
brcm80211@lists.linux.dev, Ragul Balaji <ragulbaby@gmail.com>,
Ho Jie Feng <hjf3108@gmail.com>,
linux-kernel@vger.kernel.org,
brcm80211-dev-list.pdl@broadcom.com
Subject: [RFC PATCH wireless-next 17/17] wifi: bcm4323x: add Kconfig, Makefile and MAINTAINERS entry
Date: Mon, 26 Oct 2026 13:36:23 +0800 [thread overview]
Message-ID: <20261026053633.361454-18-ragulbaby@gmail.com> (raw)
In-Reply-To: <20261026053633.361454-1-ragulbaby@gmail.com>
Wire up the driver so that it can be built
Signed-off-by: Ragul Balaji <ragulbaby@gmail.com>
Signed-off-by: Ho Jie Feng <hjf3108@gmail.com>
---
MAINTAINERS | 7 +++++++
drivers/net/wireless/broadcom/brcm80211/Kconfig | 1 +
drivers/net/wireless/broadcom/brcm80211/Makefile | 1 +
.../net/wireless/broadcom/brcm80211/bcm4323x/Kconfig | 12 ++++++++++++
.../wireless/broadcom/brcm80211/bcm4323x/Makefile | 6 ++++++
5 files changed, 27 insertions(+)
create mode 100644 drivers/net/wireless/broadcom/brcm80211/bcm4323x/Kconfig
create mode 100644 drivers/net/wireless/broadcom/brcm80211/bcm4323x/Makefile
diff --git a/MAINTAINERS b/MAINTAINERS
index 733660095..91f4eef9e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5210,6 +5210,13 @@ S: Maintained
F: Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
F: drivers/media/platform/broadcom/bcm2835-unicam*
+BROADCOM BCM4323X USB WIRELESS DRIVER
+M: Ragul Balaji <ragulbaby@gmail.com>
+R: Ho Jie Feng <hjf3108@gmail.com>
+L: linux-wireless@vger.kernel.org
+S: Maintained
+F: drivers/net/wireless/broadcom/brcm80211/bcm4323x/
+
BROADCOM BCM47XX MIPS ARCHITECTURE
M: Hauke Mehrtens <hauke@hauke-m.de>
M: Rafał Miłecki <zajec5@gmail.com>
diff --git a/drivers/net/wireless/broadcom/brcm80211/Kconfig b/drivers/net/wireless/broadcom/brcm80211/Kconfig
index 19d0c003f..e363ebdd5 100644
--- a/drivers/net/wireless/broadcom/brcm80211/Kconfig
+++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig
@@ -23,6 +23,7 @@ config BRCMSMAC_LEDS
is enabled and reachable from the driver module.
source "drivers/net/wireless/broadcom/brcm80211/brcmfmac/Kconfig"
+source "drivers/net/wireless/broadcom/brcm80211/bcm4323x/Kconfig"
config BRCM_TRACING
bool "Broadcom device tracing"
diff --git a/drivers/net/wireless/broadcom/brcm80211/Makefile b/drivers/net/wireless/broadcom/brcm80211/Makefile
index 88115d072..4d0dc67e6 100644
--- a/drivers/net/wireless/broadcom/brcm80211/Makefile
+++ b/drivers/net/wireless/broadcom/brcm80211/Makefile
@@ -11,3 +11,4 @@ subdir-ccflags-$(CONFIG_BRCMDBG) += -DDEBUG
obj-$(CONFIG_BRCMUTIL) += brcmutil/
obj-$(CONFIG_BRCMFMAC) += brcmfmac/
obj-$(CONFIG_BRCMSMAC) += brcmsmac/
+obj-$(CONFIG_BCM4323X) += bcm4323x/
diff --git a/drivers/net/wireless/broadcom/brcm80211/bcm4323x/Kconfig b/drivers/net/wireless/broadcom/brcm80211/bcm4323x/Kconfig
new file mode 100644
index 000000000..0015893f9
--- /dev/null
+++ b/drivers/net/wireless/broadcom/brcm80211/bcm4323x/Kconfig
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config BCM4323X
+ tristate "Broadcom BCM4323x USB support"
+ depends on MAC80211 && USB && INPUT
+ select BRCMUTIL
+ select FW_LOADER
+ help
+ Support for the Broadcom BCM43231 and BCM4323 USB wireless adapters
+ used in the Netgear WNA3100 and WNDA3100v2 and the Belkin F9L1101.
+
+ To compile this driver as a module, choose M here. The module will
+ be called bcm4323x.
diff --git a/drivers/net/wireless/broadcom/brcm80211/bcm4323x/Makefile b/drivers/net/wireless/broadcom/brcm80211/bcm4323x/Makefile
new file mode 100644
index 000000000..406cc8fad
--- /dev/null
+++ b/drivers/net/wireless/broadcom/brcm80211/bcm4323x/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+ccflags-y += -I $(src)/../include
+
+obj-$(CONFIG_BCM4323X) += bcm4323x.o
+bcm4323x-y := bcm4323x_core.o bcm4323x_mac.o bcm4323x_tx.o bcm4323x_rx.o
+bcm4323x-$(CONFIG_MAC80211_LEDS) += bcm4323x_led.o
--
2.53.0
prev parent reply other threads:[~2026-10-26 5:37 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20261026053633.361454-1-ragulbaby@gmail.com>
2026-10-26 5:36 ` [RFC PATCH wireless-next 01/17] wifi: brcmsmac: make d11.h self-contained Ragul Balaji
2026-10-26 5:36 ` [RFC PATCH wireless-next 02/17] wifi: brcm80211: move d11.h to the shared include directory Ragul Balaji
2026-10-26 5:36 ` [RFC PATCH wireless-next 03/17] wifi: brcmsmac: look up OFDM rates in rate.c Ragul Balaji
2026-10-26 5:36 ` [RFC PATCH wireless-next 04/17] wifi: brcmsmac: give the rate tables and helpers a brcmu_ prefix Ragul Balaji
2026-10-26 5:36 ` [RFC PATCH wireless-next 05/17] wifi: brcmsmac: round short-GI L-SIG lengths up to whole symbols Ragul Balaji
2026-10-26 5:36 ` [RFC PATCH wireless-next 06/17] wifi: brcmsmac: pass the band to the PLCP and frame timing helpers Ragul Balaji
2026-10-26 5:36 ` [RFC PATCH wireless-next 07/17] wifi: brcmsmac: move the PLCP and frame timing helpers to rate.c Ragul Balaji
2026-10-26 5:36 ` [RFC PATCH wireless-next 08/17] wifi: brcm80211: move the rate helpers of brcmsmac to brcmutil Ragul Balaji
2026-10-26 5:36 ` [RFC PATCH wireless-next 09/17] wifi: brcm80211: move the USB bootloader definitions to a shared header Ragul Balaji
2026-10-26 5:36 ` [RFC PATCH wireless-next 10/17] wifi: mac80211: export ieee80211_get_bssid() again Ragul Balaji
2026-10-26 5:36 ` [RFC PATCH wireless-next 11/17] wifi: bcm4323x: add the shared definitions Ragul Balaji
2026-10-26 5:36 ` [RFC PATCH wireless-next 12/17] wifi: bcm4323x: add the USB transport and firmware setup Ragul Balaji
2026-10-26 5:36 ` [RFC PATCH wireless-next 13/17] wifi: bcm4323x: add the receive path Ragul Balaji
2026-10-26 5:36 ` [RFC PATCH wireless-next 14/17] wifi: bcm4323x: add the transmit path Ragul Balaji
2026-10-26 5:36 ` [RFC PATCH wireless-next 15/17] wifi: bcm4323x: add the mac80211 operations Ragul Balaji
2026-10-26 5:36 ` [RFC PATCH wireless-next 16/17] wifi: bcm4323x: add LED and WPS button support Ragul Balaji
2026-10-26 5:36 ` Ragul Balaji [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261026053633.361454-18-ragulbaby@gmail.com \
--to=ragulbaby@gmail.com \
--cc=arend.vanspriel@broadcom.com \
--cc=brcm80211-dev-list.pdl@broadcom.com \
--cc=brcm80211@lists.linux.dev \
--cc=hjf3108@gmail.com \
--cc=johannes@sipsolutions.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®