From: Tristan Madani <tristmd@gmail.com>
To: Mark Brown <broonie@kernel.org>, Takashi Iwai <tiwai@suse.com>
Cc: Oder Chiou <oder_chiou@realtek.com>,
Bard Liao <bardliao@realtek.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>,
Jorge Eduardo Candelaria <jorge.candelaria@ti.com>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org,
Tristan Madani <tristan@talencesecurity.com>
Subject: [PATCH 2/4] ASoC: rt5659: cancel jack_detect_work on component remove
Date: Mon, 26 Oct 2026 11:22:10 +0000 [thread overview]
Message-ID: <20261026112212.2519775-3-tristmd@gmail.com> (raw)
In-Reply-To: <20261026112212.2519775-1-tristmd@gmail.com>
From: Tristan Madani <tristan@talencesecurity.com>
rt5659_remove() resets the codec via regmap_write() but does not cancel
the pending jack_detect_work. Since the IRQ is registered with
devm_request_threaded_irq(), it remains active until after the component
remove callback returns. The IRQ handler (rt5659_irq) schedules
jack_detect_work, so a late interrupt can queue work that runs against a
reset codec.
Track successful IRQ acquisition with a flag so that disable_irq()
only quiesces a line this driver actually owns. On component remove,
disable the IRQ to synchronize with any running handler and prevent
new enqueues, then drain the residual jack_detect_work synchronously
before resetting the hardware. On the next component probe (card
rebind), re-enable the IRQ to restore jack detection.
Fixes: d3cb2de2479b ("ASoC: rt5659: add rt5659 codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
---
sound/soc/codecs/rt5659.c | 17 ++++++++++++++++-
sound/soc/codecs/rt5659.h | 2 ++
2 files changed, 18 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/rt5659.c b/sound/soc/codecs/rt5659.c
index 3097ee6d4e89f..340d3e7be7a40 100644
--- a/sound/soc/codecs/rt5659.c
+++ b/sound/soc/codecs/rt5659.c
@@ -3664,6 +3664,12 @@ static int rt5659_probe(struct snd_soc_component *component)
{
struct snd_soc_dapm_context *dapm = snd_soc_component_to_dapm(component);
struct rt5659_priv *rt5659 = snd_soc_component_get_drvdata(component);
+ struct i2c_client *i2c = to_i2c_client(component->dev);
+
+ if (rt5659->irq_disabled) {
+ enable_irq(i2c->irq);
+ rt5659->irq_disabled = false;
+ }
rt5659->component = component;
@@ -3684,7 +3690,14 @@ static int rt5659_probe(struct snd_soc_component *component)
static void rt5659_remove(struct snd_soc_component *component)
{
struct rt5659_priv *rt5659 = snd_soc_component_get_drvdata(component);
+ struct i2c_client *i2c = to_i2c_client(component->dev);
+
+ if (rt5659->irq_acquired) {
+ disable_irq(i2c->irq);
+ rt5659->irq_disabled = true;
+ }
+ cancel_delayed_work_sync(&rt5659->jack_detect_work);
regmap_write(rt5659->regmap, RT5659_RESET, 0);
}
@@ -4290,7 +4303,9 @@ static int rt5659_i2c_probe(struct i2c_client *i2c)
ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL,
rt5659_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
| IRQF_ONESHOT, "rt5659", rt5659);
- if (ret)
+ if (!ret)
+ rt5659->irq_acquired = true;
+ else
dev_err(&i2c->dev, "Failed to request IRQ: %d\n", ret);
/* Enable IRQ output for GPIO1 pin any way */
diff --git a/sound/soc/codecs/rt5659.h b/sound/soc/codecs/rt5659.h
index b49fd8baf4e7e..4df7d7dd99e16 100644
--- a/sound/soc/codecs/rt5659.h
+++ b/sound/soc/codecs/rt5659.h
@@ -1813,6 +1813,8 @@ struct rt5659_priv {
int jack_type;
bool hda_hp_plugged;
bool hda_mic_plugged;
+ bool irq_acquired;
+ bool irq_disabled;
};
int rt5659_set_jack_detect(struct snd_soc_component *component,
--
2.47.3
next prev parent reply other threads:[~2026-10-26 11:22 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-26 11:22 [PATCH 0/4] ASoC: cancel pending delayed works " Tristan Madani
2026-10-26 11:22 ` [PATCH 1/4] ASoC: rt5668: " Tristan Madani
2026-10-26 11:22 ` Tristan Madani [this message]
2026-10-26 11:22 ` [PATCH 3/4] ASoC: twl6040: cancel headset jack work " Tristan Madani
2026-10-26 11:22 ` [PATCH 4/4] ASoC: wm8994: drain all delayed works " Tristan Madani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261026112212.2519775-3-tristmd@gmail.com \
--to=tristmd@gmail.com \
--cc=bardliao@realtek.com \
--cc=broonie@kernel.org \
--cc=jorge.candelaria@ti.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=oder_chiou@realtek.com \
--cc=perex@perex.cz \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.com \
--cc=tristan@talencesecurity.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®