[PATCH v3 1/6] phy: broadcom: brcm-sata: Keep NSP ports in the shared PCB window

[Florian Fainelli <florian.fainelli@broadcom.com>]

Northstar Plus has one PCB register aperture for both SATA ports. Its
per-port OOB settings use separate banks, while the PLL registers are
shared.

The 40nm MDIO refactor made all non-40nm platforms use a 0x1000 per-port
stride. NSP previously passed the shared base directly to the helpers.
For port 1, the new stride moves the bank selector from 0x1804033c to
0x1804133c in the AHCI register window, outside the PHY resource, and
prevents the second PHY from being initialized correctly.

Exclude NSP from the per-port aperture offset in both read and write
helpers, preserving its existing bank selection.

Fixes: 0ed41b33882c ("phy: brcm-sata: Correct MDIO operations for 40nm platforms")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
 drivers/phy/broadcom/phy-brcm-sata.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c
index fb69e21a0292..b5fb9dff1ae9 100644
--- a/drivers/phy/broadcom/phy-brcm-sata.c
+++ b/drivers/phy/broadcom/phy-brcm-sata.c
@@ -215,9 +215,10 @@ static void brcm_sata_phy_wr(struct brcm_sata_port *port, u32 bank,
 	void __iomem *pcb_base = priv->phy_base;
 	u32 tmp;
 
+	/* NSP has one shared PCB window; its per-port OOB banks are selected below. */
 	if (priv->version == BRCM_SATA_PHY_STB_40NM)
 		bank += (port->portnum * SATA_PCB_REG_40NM_SPACE_SIZE);
-	else
+	else if (priv->version != BRCM_SATA_PHY_IPROC_NSP)
 		pcb_base += (port->portnum * SATA_PCB_REG_28NM_SPACE_SIZE);
 
 	writel(bank, pcb_base + SATA_PCB_BANK_OFFSET);
@@ -233,7 +234,7 @@ static u32 brcm_sata_phy_rd(struct brcm_sata_port *port, u32 bank, u32 ofs)
 
 	if (priv->version == BRCM_SATA_PHY_STB_40NM)
 		bank += (port->portnum * SATA_PCB_REG_40NM_SPACE_SIZE);
-	else
+	else if (priv->version != BRCM_SATA_PHY_IPROC_NSP)
 		pcb_base += (port->portnum * SATA_PCB_REG_28NM_SPACE_SIZE);
 
 	writel(bank, pcb_base + SATA_PCB_BANK_OFFSET);
-- 
2.53.0