mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Szymon Durawa <szymon.durawa@linux.intel.com>
To: nirmal.patel@linux.intel.com, bhelgaas@google.com,
	robh@kernel.org, mani@kernel.org, kwilczynski@kernel.org,
	lpieralisi@kernel.org, asutosh.pathak@linux.intel.com,
	szymon.durawa@linux.intel.com
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v9 5/7] PCI: vmd: Replace hardcoded values with enum and defines
Date: Mon, 26 Oct 2026 20:54:58 +0000	[thread overview]
Message-ID: <20261026205502.3502574-6-szymon.durawa@linux.intel.com> (raw)
In-Reply-To: <20261026205502.3502574-1-szymon.durawa@linux.intel.com>

Add enum vmd_resource type to replace hardcoded values. Add defines for
vmd bus start number based on VMD restriction value. No functional
changes.

Suggested-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Reviewed-by: Asutosh Pathak <asutosh.pathak@linux.intel.com>
Signed-off-by: Szymon Durawa <szymon.durawa@linux.intel.com>
---
 drivers/pci/controller/vmd.c | 52 +++++++++++++++++++++++-------------
 1 file changed, 34 insertions(+), 18 deletions(-)

diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index 8b59b369f126..f85dd2d7c4af 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -26,6 +26,11 @@
 #define VMD_MEMBAR1	2
 #define VMD_MEMBAR2	4
 
+/* VMD restriction value determines secondary start bus number */
+#define VMD_RESTRICT_0_BUS_START 0x0
+#define VMD_RESTRICT_1_BUS_START 0x80
+#define VMD_RESTRICT_2_BUS_START 0xE0
+
 #define PCI_REG_VMCAP		0x40
 #define BUS_RESTRICT_CAP(vmcap)	(vmcap & 0x1)
 #define PCI_REG_VMCONFIG	0x44
@@ -43,6 +48,13 @@
 #define BASE_ID_REG_28C1		0x2840
 #define MEMBAR2_OFFSET_28C1		0x30d0
 
+enum vmd_resource {
+	VMD_RES_CFGBAR = 0, /* VMD Bus0 Config BAR */
+	VMD_RES_MBAR_1, /* VMD Bus0 Resource MemBAR 1 */
+	VMD_RES_MBAR_2, /* VMD Bus0 Resource MemBAR 2 */
+	VMD_RES_COUNT
+};
+
 enum vmd_features {
 	/*
 	 * Device may contain registers which hint the physical location of the
@@ -150,7 +162,7 @@ struct vmd_dev {
 	struct vmd_irq_list	*irqs;
 
 	struct pci_sysdata	sysdata;
-	struct resource		resources[3];
+	struct resource		resources[VMD_RES_COUNT];
 	struct irq_domain	*irq_domain;
 	struct pci_bus		*bus;
 	u8			busn_start;
@@ -554,7 +566,7 @@ static resource_size_t vmd_cfgbar_ecam_space(struct vmd_dev *vmd)
 	unsigned int ecam_start;
 
 	cfgbar_buses = resource_size(&vmd->dev->resource[VMD_CFGBAR]) >> 20;
-	ecam_start = vmd_bus_to_ecam(vmd, vmd->resources[0].start);
+	ecam_start = vmd_bus_to_ecam(vmd, vmd->resources[VMD_RES_CFGBAR].start);
 	if (ecam_start >= cfgbar_buses)
 		return 0;
 
@@ -562,14 +574,15 @@ static resource_size_t vmd_cfgbar_ecam_space(struct vmd_dev *vmd)
 }
 static void vmd_domain_reset(struct vmd_dev *vmd)
 {
-	u16 bus, max_buses = resource_size(&vmd->resources[0]);
+	u16 bus, max_buses = resource_size(&vmd->resources[VMD_RES_CFGBAR]);
 	u8 dev, functions, fn, hdr_type;
 	unsigned int ecam_bus;
 	char __iomem *base;
 
 	max_buses = min_t(u16, max_buses, vmd_cfgbar_ecam_space(vmd));
 	for (bus = 0; bus < max_buses; bus++) {
-		ecam_bus = vmd_bus_to_ecam(vmd, vmd->resources[0].start + bus);
+		ecam_bus = vmd_bus_to_ecam(vmd, vmd->resources[VMD_RES_CFGBAR].start +
+					   bus);
 		for (dev = 0; dev < 32; dev++) {
 			base = vmd->cfgbar + PCIE_ECAM_OFFSET(ecam_bus,
 						PCI_DEVFN(dev, 0), 0);
@@ -613,8 +626,8 @@ static void vmd_domain_reset(struct vmd_dev *vmd)
 
 static void vmd_attach_resources(struct vmd_dev *vmd)
 {
-	vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[1];
-	vmd->dev->resource[VMD_MEMBAR2].child = &vmd->resources[2];
+	vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[VMD_RES_MBAR_1];
+	vmd->dev->resource[VMD_MEMBAR2].child = &vmd->resources[VMD_RES_MBAR_2];
 }
 
 static void vmd_detach_resources(struct vmd_dev *vmd)
@@ -690,14 +703,14 @@ static int vmd_get_bus_number_start(struct vmd_dev *vmd)
 
 		switch (BUS_RESTRICT_CFG(reg)) {
 		case 0:
-			vmd->busn_start = 0;
+			vmd->busn_start = VMD_RESTRICT_0_BUS_START;
 			break;
 		case 1:
-			vmd->busn_start = 128;
+			vmd->busn_start = VMD_RESTRICT_1_BUS_START;
 			break;
 		case 3:
 		case 2:
-			vmd->busn_start = 224;
+			vmd->busn_start = VMD_RESTRICT_2_BUS_START;
 			break;
 		default:
 			pci_err(dev, "Unknown Bus Offset Setting (%d)\n",
@@ -910,10 +923,10 @@ static void vmd_configure_cfgbar(struct vmd_dev *vmd)
 	struct resource *res = &vmd->dev->resource[VMD_CFGBAR];
 	resource_size_t busn_end;
 
-	/* Do not let resource[0] end go out of bound.*/
+	/* Do not let resource[VMD_RES_CFGBAR] end go out of bound.*/
 	busn_end = vmd->busn_start + (resource_size(res) >> 20) - 1;
 	busn_end = min_t(resource_size_t, busn_end, 0xff);
-	vmd->resources[0] = (struct resource) {
+	vmd->resources[VMD_RES_CFGBAR] = (struct resource) {
 		.name  = "VMD CFGBAR",
 		.start = vmd->busn_start,
 		.end   = busn_end,
@@ -970,14 +983,15 @@ static int vmd_configure_membar1_membar2(struct vmd_dev *vmd,
 {
 	int ret;
 
-	ret = vmd_configure_membar(vmd, 1, VMD_MEMBAR1, 0, 0);
+	ret = vmd_configure_membar(vmd, VMD_RES_MBAR_1, VMD_MEMBAR1, 0, 0);
 	if (ret)
 		return ret;
 
-	ret = vmd_configure_membar(vmd, 2, VMD_MEMBAR2, mbar2_ofs, 0);
+	ret = vmd_configure_membar(vmd, VMD_RES_MBAR_2, VMD_MEMBAR2, mbar2_ofs, 0);
 	if (ret) {
-		devm_kfree(&vmd->dev->dev, (void *)vmd->resources[1].name);
-		memset(&vmd->resources[1], 0, sizeof(vmd->resources[1]));
+		devm_kfree(&vmd->dev->dev, (void *)vmd->resources[VMD_RES_MBAR_1].name);
+		memset(&vmd->resources[VMD_RES_MBAR_1], 0,
+		       sizeof(vmd->resources[VMD_RES_MBAR_1]));
 		return ret;
 	}
 
@@ -989,9 +1003,11 @@ static int vmd_create_bus(struct vmd_dev *vmd, struct pci_sysdata *sd,
 {
 	LIST_HEAD(resources);
 
-	pci_add_resource(&resources, &vmd->resources[0]);
-	pci_add_resource_offset(&resources, &vmd->resources[1], offset[0]);
-	pci_add_resource_offset(&resources, &vmd->resources[2], offset[1]);
+	pci_add_resource(&resources, &vmd->resources[VMD_RES_CFGBAR]);
+	pci_add_resource_offset(&resources, &vmd->resources[VMD_RES_MBAR_1],
+				offset[0]);
+	pci_add_resource_offset(&resources, &vmd->resources[VMD_RES_MBAR_2],
+				offset[1]);
 
 	vmd->bus = pci_create_root_bus(&vmd->dev->dev, vmd->busn_start,
 				       &vmd_ops, sd, &resources);
-- 
2.43.0


  parent reply	other threads:[~2026-10-26 18:29 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-26 20:54 [PATCH v9 0/7] VMD add second root bus support Szymon Durawa
2026-10-26 20:54 ` [PATCH v9 1/7] PCI: vmd: Add vmd_bus_enumeration() helper function Szymon Durawa
2026-10-26 20:54 ` [PATCH v9 2/7] PCI: vmd: Add vmd_configure_cfgbar() " Szymon Durawa
2026-10-26 20:54 ` [PATCH v9 3/7] PCI: vmd: Add vmd_configure_membar() and vmd_configure_membar1_membar2() Szymon Durawa
2026-10-26 20:54 ` [PATCH v9 4/7] PCI: vmd: Add vmd_create_bus() Szymon Durawa
2026-10-26 20:54 ` Szymon Durawa [this message]
2026-10-26 20:54 ` [PATCH v9 6/7] PCI: vmd: Convert bus, busn_start and sysdata to an array Szymon Durawa
2026-10-26 20:55 ` [PATCH v9 7/7] PCI: vmd: Add support for second rootbus under VMD Szymon Durawa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261026205502.3502574-6-szymon.durawa@linux.intel.com \
    --to=szymon.durawa@linux.intel.com \
    --cc=asutosh.pathak@linux.intel.com \
    --cc=bhelgaas@google.com \
    --cc=kwilczynski@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=mani@kernel.org \
    --cc=nirmal.patel@linux.intel.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®