From: Albu Victor-Marian <albu.victor.m@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
Yalagada Pavan Kumar <pavankumaryalagada@gmail.com>,
Albu Victor-Marian <albu.victor.m@gmail.com>
Subject: [PATCH 3/3] staging: rtl8723bs: fix spacing and line length in ieee80211 files
Date: Mon, 26 Oct 2026 22:56:59 +0200 [thread overview]
Message-ID: <20261026205659.181065-4-albu.victor.m@gmail.com> (raw)
In-Reply-To: <20261026205659.181065-1-albu.victor.m@gmail.com>
Adjust coding style to current Linux kernel standards.
Wrap lines longer than 100 columns, align continuation lines with
the opening parenthesis and rename bw_40MHz to bw_40mhz to avoid
CamelCase.
No functional change intended.
Compile tested only.
Signed-off-by: Albu Victor-Marian <albu.victor.m@gmail.com>
---
.../staging/rtl8723bs/core/rtw_ieee80211.c | 92 +++++++++++--------
drivers/staging/rtl8723bs/include/ieee80211.h | 48 +++++-----
2 files changed, 77 insertions(+), 63 deletions(-)
diff --git a/drivers/staging/rtl8723bs/core/rtw_ieee80211.c b/drivers/staging/rtl8723bs/core/rtw_ieee80211.c
index 059f9035db6c..e68adcd562c8 100644
--- a/drivers/staging/rtl8723bs/core/rtw_ieee80211.c
+++ b/drivers/staging/rtl8723bs/core/rtw_ieee80211.c
@@ -105,7 +105,7 @@ int rtw_check_network_type(unsigned char *rate, int channel)
}
u8 *rtw_set_fixed_ie(unsigned char *pbuf, unsigned int len, unsigned char *source,
- unsigned int *frlen)
+ unsigned int *frlen)
{
memcpy(pbuf, source, len);
*frlen = *frlen + len;
@@ -166,7 +166,8 @@ u8 *rtw_get_ie(u8 *pbuf, signed int index, signed int *len, signed int limit)
* @eid: Element ID to match
* @oui: OUI to match
* @oui_len: OUI length
- * @ie: If not NULL and the specific IE is found, the IE will be copied to the buf starting from the specific IE
+ * @ie: If not NULL and the specific IE is found, the IE will be copied to the buf
+ * starting from the specific IE
* @ielen: If not NULL and the specific IE is found, will set to the length of the entire IE
*
* Returns: The address of the specific IE found, or NULL
@@ -234,7 +235,8 @@ int rtw_ies_remove_ie(u8 *ies, uint *ies_len, uint offset, u8 eid, u8 *oui, u8 o
search_len = *ies_len - offset;
while (1) {
- target_ie = rtw_get_ie_ex(start, search_len, eid, oui, oui_len, NULL, &target_ielen);
+ target_ie = rtw_get_ie_ex(start, search_len, eid, oui, oui_len, NULL,
+ &target_ielen);
if (target_ie && target_ielen) {
u8 *remain_ies = target_ie + target_ielen;
uint remain_len = search_len - (remain_ies - start);
@@ -271,7 +273,8 @@ void rtw_set_supported_rate(u8 *supported_rates, uint mode)
case WIRELESS_11_24N:
case WIRELESS_11BG_24N:
memcpy(supported_rates, WIFI_CCKRATES, IEEE80211_CCK_RATE_LEN);
- memcpy(supported_rates + IEEE80211_CCK_RATE_LEN, WIFI_OFDMRATES, IEEE80211_NUM_OFDM_RATESLEN);
+ memcpy(supported_rates + IEEE80211_CCK_RATE_LEN, WIFI_OFDMRATES,
+ IEEE80211_NUM_OFDM_RATESLEN);
break;
}
}
@@ -298,7 +301,8 @@ int rtw_generate_ie(struct registry_priv *pregistrypriv)
ie += sz;
/* beacon interval : 2bytes */
- *(__le16 *)ie = cpu_to_le16((u16)pdev_network->configuration.beacon_period);/* BCN_INTERVAL; */
+ /* BCN_INTERVAL; */
+ *(__le16 *)ie = cpu_to_le16((u16)pdev_network->configuration.beacon_period);
sz += 2;
ie += 2;
@@ -317,7 +321,8 @@ int rtw_generate_ie(struct registry_priv *pregistrypriv)
ie += 2;
/* SSID */
- ie = rtw_set_ie(ie, WLAN_EID_SSID, pdev_network->ssid.ssid_length, pdev_network->ssid.ssid, &sz);
+ ie = rtw_set_ie(ie, WLAN_EID_SSID, pdev_network->ssid.ssid_length, pdev_network->ssid.ssid,
+ &sz);
/* supported rates */
wireless_mode = pregistrypriv->wireless_mode;
@@ -326,21 +331,24 @@ int rtw_generate_ie(struct registry_priv *pregistrypriv)
rate_len = rtw_get_rateset_len(pdev_network->supported_rates);
- if (rate_len > 8) {
+ if (rate_len > 8)
ie = rtw_set_ie(ie, WLAN_EID_SUPP_RATES, 8, pdev_network->supported_rates, &sz);
- } else {
- ie = rtw_set_ie(ie, WLAN_EID_SUPP_RATES, rate_len, pdev_network->supported_rates, &sz);
- }
+ else
+ ie = rtw_set_ie(ie, WLAN_EID_SUPP_RATES, rate_len, pdev_network->supported_rates,
+ &sz);
/* DS parameter set */
- ie = rtw_set_ie(ie, WLAN_EID_DS_PARAMS, 1, (u8 *)&pdev_network->configuration.ds_config, &sz);
+ ie = rtw_set_ie(ie, WLAN_EID_DS_PARAMS, 1, (u8 *)&pdev_network->configuration.ds_config,
+ &sz);
/* IBSS Parameter Set */
- ie = rtw_set_ie(ie, WLAN_EID_IBSS_PARAMS, 2, (u8 *)&pdev_network->configuration.atim_window, &sz);
+ ie = rtw_set_ie(ie, WLAN_EID_IBSS_PARAMS, 2, (u8 *)&pdev_network->configuration.atim_window,
+ &sz);
if (rate_len > 8)
- ie = rtw_set_ie(ie, WLAN_EID_EXT_SUPP_RATES, (rate_len - 8), (pdev_network->supported_rates + 8), &sz);
+ ie = rtw_set_ie(ie, WLAN_EID_EXT_SUPP_RATES, (rate_len - 8),
+ (pdev_network->supported_rates + 8), &sz);
/* HT Cap. */
if ((pregistrypriv->wireless_mode & WIRELESS_11_24N) &&
@@ -439,7 +447,8 @@ int rtw_get_wpa2_cipher_suite(u8 *s)
return 0;
}
-int rtw_parse_wpa_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher, int *pairwise_cipher, int *is_8021x)
+int rtw_parse_wpa_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher, int *pairwise_cipher,
+ int *is_8021x)
{
int i, ret = _SUCCESS;
int left, count;
@@ -503,7 +512,8 @@ int rtw_parse_wpa_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher, int *pairwis
return ret;
}
-int rtw_parse_wpa2_ie(u8 *rsn_ie, int rsn_ie_len, int *group_cipher, int *pairwise_cipher, int *is_8021x)
+int rtw_parse_wpa2_ie(u8 *rsn_ie, int rsn_ie_len, int *group_cipher, int *pairwise_cipher,
+ int *is_8021x)
{
int i, ret = _SUCCESS;
int left, count;
@@ -699,8 +709,10 @@ u8 *rtw_get_wps_ie(u8 *in_ie, uint in_len, u8 *wps_ie, uint *wps_ielen)
* @wps_ie: Address of WPS IE to search
* @wps_ielen: Length limit from wps_ie
* @target_attr_id: The attribute ID of WPS attribute to search
- * @buf_attr: If not NULL and the WPS attribute is found, WPS attribute will be copied to the buf starting from buf_attr
- * @len_attr: If not NULL and the WPS attribute is found, will set to the length of the entire WPS attribute
+ * @buf_attr: If not NULL and the WPS attribute is found, WPS attribute will be copied to the buf
+ * starting from buf_attr
+ * @len_attr: If not NULL and the WPS attribute is found, will set to the length of the entire WPS
+ * attribute
*
* Returns: the address of the specific WPS attribute found, or NULL
*/
@@ -717,7 +729,7 @@ u8 *rtw_get_wps_attr(u8 *wps_ie, uint wps_ielen, u16 target_attr_id, u8 *buf_att
return attr_ptr;
if ((wps_ie[0] != WLAN_EID_VENDOR_SPECIFIC) ||
- (memcmp(wps_ie + 2, wps_oui, 4))) {
+ (memcmp(wps_ie + 2, wps_oui, 4))) {
return attr_ptr;
}
@@ -758,12 +770,15 @@ u8 *rtw_get_wps_attr(u8 *wps_ie, uint wps_ielen, u16 target_attr_id, u8 *buf_att
* @wps_ie: Address of WPS IE to search
* @wps_ielen: Length limit from wps_ie
* @target_attr_id: The attribute ID of WPS attribute to search
- * @buf_content: If not NULL and the WPS attribute is found, WPS attribute content will be copied to the buf starting from buf_content
- * @len_content: If not NULL and the WPS attribute is found, will set to the length of the WPS attribute content
+ * @buf_content: If not NULL and the WPS attribute is found, WPS attribute content will be copied to
+ * the buf starting from buf_content
+ * @len_content: If not NULL and the WPS attribute is found, will set to the length of the WPS
+ * attribute content
*
* Returns: the address of the specific WPS attribute content found, or NULL
*/
-u8 *rtw_get_wps_attr_content(u8 *wps_ie, uint wps_ielen, u16 target_attr_id, u8 *buf_content, uint *len_content)
+u8 *rtw_get_wps_attr_content(u8 *wps_ie, uint wps_ielen, u16 target_attr_id, u8 *buf_content,
+ uint *len_content)
{
u8 *attr_ptr;
u32 attr_len;
@@ -787,8 +802,8 @@ u8 *rtw_get_wps_attr_content(u8 *wps_ie, uint wps_ielen, u16 target_attr_id, u8
}
static int rtw_ieee802_11_parse_vendor_specific(u8 *pos, uint elen,
- struct rtw_ieee802_11_elems *elems,
- int show_errors)
+ struct rtw_ieee802_11_elems *elems,
+ int show_errors)
{
unsigned int oui;
@@ -932,9 +947,7 @@ enum parse_result rtw_ieee802_11_parse_elems(u8 *start, uint len,
elems->ext_supp_rates_len = elen;
break;
case WLAN_EID_VENDOR_SPECIFIC:
- if (rtw_ieee802_11_parse_vendor_specific(pos, elen,
- elems,
- show_errors))
+ if (rtw_ieee802_11_parse_vendor_specific(pos, elen, elems, show_errors))
unknown++;
break;
case WLAN_EID_RSN:
@@ -1080,7 +1093,8 @@ void rtw_get_bcn_info(struct wlan_network *pnetwork)
} else {
pnetwork->bcn_info.encryp_protocol = ENCRYP_PROTOCOL_OPENSYS;
}
- rtw_get_sec_ie(pnetwork->network.ies, pnetwork->network.ie_length, NULL, &rsn_len, NULL, &wpa_len);
+ rtw_get_sec_ie(pnetwork->network.ies, pnetwork->network.ie_length, NULL, &rsn_len, NULL,
+ &wpa_len);
if (rsn_len > 0) {
pnetwork->bcn_info.encryp_protocol = ENCRYP_PROTOCOL_WPA2;
@@ -1094,7 +1108,8 @@ void rtw_get_bcn_info(struct wlan_network *pnetwork)
/* get bwmode and ch_offset */
/* parsing HT_CAP_IE */
- p = rtw_get_ie(pnetwork->network.ies + _FIXED_IE_LENGTH_, WLAN_EID_HT_CAPABILITY, &len, pnetwork->network.ie_length - _FIXED_IE_LENGTH_);
+ p = rtw_get_ie(pnetwork->network.ies + _FIXED_IE_LENGTH_, WLAN_EID_HT_CAPABILITY, &len,
+ pnetwork->network.ie_length - _FIXED_IE_LENGTH_);
if (p && len > 0) {
pht_cap = (struct ieee80211_ht_cap *)(p + 2);
pnetwork->bcn_info.ht_cap_info = le16_to_cpu(pht_cap->cap_info);
@@ -1102,7 +1117,8 @@ void rtw_get_bcn_info(struct wlan_network *pnetwork)
pnetwork->bcn_info.ht_cap_info = 0;
}
/* parsing HT_INFO_IE */
- p = rtw_get_ie(pnetwork->network.ies + _FIXED_IE_LENGTH_, WLAN_EID_HT_OPERATION, &len, pnetwork->network.ie_length - _FIXED_IE_LENGTH_);
+ p = rtw_get_ie(pnetwork->network.ies + _FIXED_IE_LENGTH_, WLAN_EID_HT_OPERATION, &len,
+ pnetwork->network.ie_length - _FIXED_IE_LENGTH_);
if (p && len > 0) {
pht_info = (struct HT_info_element *)(p + 2);
pnetwork->bcn_info.ht_info_infos_0 = pht_info->infos[0];
@@ -1112,26 +1128,26 @@ void rtw_get_bcn_info(struct wlan_network *pnetwork)
}
/* show MCS rate, unit: 100Kbps */
-u16 rtw_mcs_rate(u8 bw_40MHz, u8 short_GI, unsigned char *MCS_rate)
+u16 rtw_mcs_rate(u8 bw_40mhz, u8 short_GI, unsigned char *MCS_rate)
{
u16 max_rate = 0;
if (MCS_rate[0] & BIT(7))
- max_rate = (bw_40MHz) ? ((short_GI) ? 1500 : 1350) : ((short_GI) ? 722 : 650);
+ max_rate = (bw_40mhz) ? ((short_GI) ? 1500 : 1350) : ((short_GI) ? 722 : 650);
else if (MCS_rate[0] & BIT(6))
- max_rate = (bw_40MHz) ? ((short_GI) ? 1350 : 1215) : ((short_GI) ? 650 : 585);
+ max_rate = (bw_40mhz) ? ((short_GI) ? 1350 : 1215) : ((short_GI) ? 650 : 585);
else if (MCS_rate[0] & BIT(5))
- max_rate = (bw_40MHz) ? ((short_GI) ? 1200 : 1080) : ((short_GI) ? 578 : 520);
+ max_rate = (bw_40mhz) ? ((short_GI) ? 1200 : 1080) : ((short_GI) ? 578 : 520);
else if (MCS_rate[0] & BIT(4))
- max_rate = (bw_40MHz) ? ((short_GI) ? 900 : 810) : ((short_GI) ? 433 : 390);
+ max_rate = (bw_40mhz) ? ((short_GI) ? 900 : 810) : ((short_GI) ? 433 : 390);
else if (MCS_rate[0] & BIT(3))
- max_rate = (bw_40MHz) ? ((short_GI) ? 600 : 540) : ((short_GI) ? 289 : 260);
+ max_rate = (bw_40mhz) ? ((short_GI) ? 600 : 540) : ((short_GI) ? 289 : 260);
else if (MCS_rate[0] & BIT(2))
- max_rate = (bw_40MHz) ? ((short_GI) ? 450 : 405) : ((short_GI) ? 217 : 195);
+ max_rate = (bw_40mhz) ? ((short_GI) ? 450 : 405) : ((short_GI) ? 217 : 195);
else if (MCS_rate[0] & BIT(1))
- max_rate = (bw_40MHz) ? ((short_GI) ? 300 : 270) : ((short_GI) ? 144 : 130);
+ max_rate = (bw_40mhz) ? ((short_GI) ? 300 : 270) : ((short_GI) ? 144 : 130);
else if (MCS_rate[0] & BIT(0))
- max_rate = (bw_40MHz) ? ((short_GI) ? 150 : 135) : ((short_GI) ? 72 : 65);
+ max_rate = (bw_40mhz) ? ((short_GI) ? 150 : 135) : ((short_GI) ? 72 : 65);
return max_rate;
}
diff --git a/drivers/staging/rtl8723bs/include/ieee80211.h b/drivers/staging/rtl8723bs/include/ieee80211.h
index fc0473ff8a56..f476b01c6537 100644
--- a/drivers/staging/rtl8723bs/include/ieee80211.h
+++ b/drivers/staging/rtl8723bs/include/ieee80211.h
@@ -83,7 +83,6 @@ enum {
#define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED 6
#define IEEE_CRYPT_ERR_CARD_CONF_FAILED 7
-
#define IEEE_CRYPT_ALG_NAME_LEN 16
#define WPA_CIPHER_NONE BIT(0)
@@ -92,8 +91,6 @@ enum {
#define WPA_CIPHER_TKIP BIT(3)
#define WPA_CIPHER_CCMP BIT(4)
-
-
#define WPA_SELECTOR_LEN 4
extern u8 RTW_WPA_OUI_TYPE[];
extern u16 RTW_WPA_VERSION;
@@ -107,7 +104,6 @@ extern u8 WPA_CIPHER_SUITE_WRAP[];
extern u8 WPA_CIPHER_SUITE_CCMP[];
extern u8 WPA_CIPHER_SUITE_WEP104[];
-
#define RSN_HEADER_LEN 4
#define RSN_SELECTOR_LEN 4
@@ -121,7 +117,6 @@ extern u8 RSN_CIPHER_SUITE_WRAP[];
extern u8 RSN_CIPHER_SUITE_CCMP[];
extern u8 RSN_CIPHER_SUITE_WEP104[];
-
enum {
RATEID_IDX_BGN_40M_2SS = 0,
RATEID_IDX_BGN_40M_1SS = 1,
@@ -144,10 +139,14 @@ enum network_type {
/* Combination */
/* Type for current wireless mode */
- WIRELESS_11BG = (WIRELESS_11B|WIRELESS_11G), /* tx: cck & ofdm, rx: cck & ofdm & MCS, hw: cck & ofdm */
- WIRELESS_11G_24N = (WIRELESS_11G|WIRELESS_11_24N), /* tx: ofdm & MCS, rx: ofdm & cck & MCS, hw: cck & ofdm */
- WIRELESS_11B_24N = (WIRELESS_11B|WIRELESS_11_24N), /* tx: ofdm & cck & MCS, rx: ofdm & cck & MCS, hw: ofdm & cck */
- WIRELESS_11BG_24N = (WIRELESS_11B|WIRELESS_11G|WIRELESS_11_24N), /* tx: ofdm & cck & MCS, rx: ofdm & cck & MCS, hw: ofdm & cck */
+ /* tx: cck & ofdm, rx: cck & ofdm & MCS, hw: cck & ofdm */
+ WIRELESS_11BG = (WIRELESS_11B | WIRELESS_11G),
+ /* tx: ofdm & MCS, rx: ofdm & cck & MCS, hw: cck & ofdm */
+ WIRELESS_11G_24N = (WIRELESS_11G | WIRELESS_11_24N),
+ /* tx: ofdm & cck & MCS, rx: ofdm & cck & MCS, hw: ofdm & cck */
+ WIRELESS_11B_24N = (WIRELESS_11B | WIRELESS_11_24N),
+ /* tx: ofdm & cck & MCS, rx: ofdm & cck & MCS, hw: ofdm & cck */
+ WIRELESS_11BG_24N = (WIRELESS_11B | WIRELESS_11G | WIRELESS_11_24N),
};
#define SUPPORTED_24G_NETTYPE_MSK (WIRELESS_11B | WIRELESS_11G | WIRELESS_11_24N)
@@ -244,7 +243,6 @@ struct eapol {
#define RTW_IEEE80211_SCTL_FRAG 0x000F
#define RTW_IEEE80211_SCTL_SEQ 0xFFF0
-
#define RTW_ERP_INFO_NON_ERP_PRESENT BIT(0)
#define RTW_ERP_INFO_USE_PROTECTION BIT(1)
#define RTW_ERP_INFO_BARKER_PREAMBLE_MODE BIT(2)
@@ -312,7 +310,6 @@ struct ieee80211_snap_hdr {
#define IEEE80211_CCK_RATE_LEN 4
#define IEEE80211_NUM_OFDM_RATESLEN 8
-
#define IEEE80211_CCK_RATE_1MB 0x02
#define IEEE80211_CCK_RATE_2MB 0x04
#define IEEE80211_CCK_RATE_5MB 0x0B
@@ -367,7 +364,6 @@ struct ieee80211_snap_hdr {
#define IEEE80211_NUM_CCK_RATES 4
#define IEEE80211_OFDM_SHIFT_MASK_A 4
-
enum {
MGN_1M = 0x02,
MGN_2M = 0x04,
@@ -585,7 +581,6 @@ enum {
#define WME_TSPEC_DIRECTION_DOWNLINK 1
#define WME_TSPEC_DIRECTION_BI_DIRECTIONAL 3
-
#define OUI_BROADCOM 0x00904c /* Broadcom (Epigram) */
#define VENDOR_HT_CAPAB_OUI_TYPE 0x33 /* 00-90-4c:0x33 */
@@ -606,12 +601,12 @@ enum {
* is not permitted.
*/
enum rtw_ieee80211_channel_flags {
- RTW_IEEE80211_CHAN_DISABLED = 1<<0,
- RTW_IEEE80211_CHAN_PASSIVE_SCAN = 1<<1,
- RTW_IEEE80211_CHAN_NO_IBSS = 1<<2,
- RTW_IEEE80211_CHAN_RADAR = 1<<3,
- RTW_IEEE80211_CHAN_NO_HT40PLUS = 1<<4,
- RTW_IEEE80211_CHAN_NO_HT40MINUS = 1<<5,
+ RTW_IEEE80211_CHAN_DISABLED = 1 << 0,
+ RTW_IEEE80211_CHAN_PASSIVE_SCAN = 1 << 1,
+ RTW_IEEE80211_CHAN_NO_IBSS = 1 << 2,
+ RTW_IEEE80211_CHAN_RADAR = 1 << 3,
+ RTW_IEEE80211_CHAN_NO_HT40PLUS = 1 << 4,
+ RTW_IEEE80211_CHAN_NO_HT40MINUS = 1 << 5,
};
#define RTW_IEEE80211_CHAN_NO_HT40 \
@@ -690,7 +685,8 @@ enum parse_result rtw_ieee802_11_parse_elems(u8 *start, uint len,
struct rtw_ieee802_11_elems *elems,
int show_errors);
-u8 *rtw_set_fixed_ie(unsigned char *pbuf, unsigned int len, unsigned char *source, unsigned int *frlen);
+u8 *rtw_set_fixed_ie(unsigned char *pbuf, unsigned int len, unsigned char *source,
+ unsigned int *frlen);
u8 *rtw_set_ie(u8 *pbuf, signed int index, uint len, u8 *source, uint *frlen);
u8 *rtw_get_ie(u8 *pbuf, signed int index, signed int *len, signed int limit);
@@ -704,14 +700,17 @@ unsigned char *rtw_get_wpa2_ie(unsigned char *pie, int *rsn_ie_len, int limit);
int rtw_get_wpa_cipher_suite(u8 *s);
int rtw_get_wpa2_cipher_suite(u8 *s);
int rtw_get_wapi_ie(u8 *in_ie, uint in_len, u8 *wapi_ie, u16 *wapi_len);
-int rtw_parse_wpa_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher, int *pairwise_cipher, int *is_8021x);
-int rtw_parse_wpa2_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher, int *pairwise_cipher, int *is_8021x);
+int rtw_parse_wpa_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher, int *pairwise_cipher,
+ int *is_8021x);
+int rtw_parse_wpa2_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher, int *pairwise_cipher,
+ int *is_8021x);
void rtw_get_sec_ie(u8 *in_ie, uint in_len, u8 *rsn_ie, u16 *rsn_len, u8 *wpa_ie, u16 *wpa_len);
u8 *rtw_get_wps_ie(u8 *in_ie, uint in_len, u8 *wps_ie, uint *wps_ielen);
u8 *rtw_get_wps_attr(u8 *wps_ie, uint wps_ielen, u16 target_attr_id, u8 *buf_attr, u32 *len_attr);
-u8 *rtw_get_wps_attr_content(u8 *wps_ie, uint wps_ielen, u16 target_attr_id, u8 *buf_content, uint *len_content);
+u8 *rtw_get_wps_attr_content(u8 *wps_ie, uint wps_ielen, u16 target_attr_id, u8 *buf_content,
+ uint *len_content);
/**
* for_each_ie - iterate over continuous IEs
@@ -728,7 +727,6 @@ uint rtw_get_rateset_len(u8 *rateset);
struct registry_priv;
int rtw_generate_ie(struct registry_priv *pregistrypriv);
-
int rtw_get_bit_value_from_ieee_value(u8 val);
bool rtw_is_cckrates_included(u8 *rate);
@@ -741,7 +739,7 @@ void rtw_get_bcn_info(struct wlan_network *pnetwork);
void rtw_macaddr_cfg(struct device *dev, u8 *mac_addr);
-u16 rtw_mcs_rate(u8 bw_40MHz, u8 short_GI, unsigned char *MCS_rate);
+u16 rtw_mcs_rate(u8 bw_40mhz, u8 short_GI, unsigned char *MCS_rate);
int rtw_action_frame_parse(const u8 *frame, u32 frame_len, u8 *category, u8 *action);
const char *action_public_str(u8 action);
--
2.43.0
next prev parent reply other threads:[~2026-10-26 20:57 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-26 20:56 [PATCH 0/3] staging: rtl8723bs: checkpatch cleanup " Albu Victor-Marian
2026-10-26 20:56 ` [PATCH 1/3] staging: rtl8723bs: convert rate and mode check macros to inline Albu Victor-Marian
2026-10-26 20:56 ` [PATCH 2/3] staging: rtl8723bs: use BIT() macro for bit definitions Albu Victor-Marian
2026-10-26 20:56 ` Albu Victor-Marian [this message]
2026-10-27 5:34 ` [PATCH 0/3] staging: rtl8723bs: checkpatch cleanup in ieee80211 files Dan Carpenter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261026205659.181065-4-albu.victor.m@gmail.com \
--to=albu.victor.m@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=pavankumaryalagada@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®