[PATCH ath-next 2/3] wifi: ath11k: ignore regulatory info of phys outside the hw mode

[Julius Bairaktaris <julius@bairaktaris.de>]

From: Semih Baskan <strst.gs@gmail.com>

The firmware sends a regulatory event for every phy it reports, also
for phys the selected hw mode does not use. On the Zyxel NBG7815
(IPQ8074) the firmware advertises DBS with phy_id_map 0x3 and DBS_SBS
with phy_id_map 0x7, and its events always carry num_phy 3. With DBS
selected num_radios is 2, so the event for phy 2 takes the fallback
path in ath11k_reg_handle_chan_list() and hits its WARN_ON(1) each time
the firmware starts:

  WARNING: CPU: 0 PID: 0 at drivers/net/wireless/ath/ath11k/reg.c:828 ath11k_reg_handle_chan_list+0x230/0x2e0 [ath11k]
  ath11k c000000.wifi: failed to process regulatory info -22

There is no radio to apply the rules of an unused phy to, so drop the
event, as the single_pdev_only case already does. A phy ID at or above
the num_phy of the event still goes to the fallback.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1

Signed-off-by: Semih Baskan <strst.gs@gmail.com>
Signed-off-by: Julius Bairaktaris <julius@bairaktaris.de>
---
 drivers/net/wireless/ath/ath11k/reg.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/reg.c b/drivers/net/wireless/ath/ath11k/reg.c
index 1030e119fd903..37be563d8de68 100644
--- a/drivers/net/wireless/ath/ath11k/reg.c
+++ b/drivers/net/wireless/ath/ath11k/reg.c
@@ -910,15 +910,27 @@ int ath11k_reg_handle_chan_list(struct ath11k_base *ab,
 	if (pdev_idx >= ab->num_radios) {
 		/* Process the event for phy0 only if single_pdev_only
 		 * is true. If pdev_idx is valid but not 0, discard the
-		 * event. Otherwise, it goes to fallback. In either case
+		 * event. The firmware also sends the rules of phys that
+		 * the selected hw mode does not use, discard those too.
+		 * Otherwise, it goes to fallback. In either case
 		 * ath11k_reg_reset_info() needs to be called to avoid
 		 * memory leak issue.
 		 */
+		u8 num_phy = reg_info->num_phy;
+
 		ath11k_reg_reset_info(reg_info);
 
 		if (ab->hw_params.single_pdev_only &&
 		    pdev_idx < ab->hw_params.num_rxdma_per_pdev)
 			return 0;
+
+		if (pdev_idx < num_phy) {
+			ath11k_dbg(ab, ATH11K_DBG_REG,
+				   "ignoring regulatory info of unused phy %d\n",
+				   pdev_idx);
+			return 0;
+		}
+
 		goto fallback;
 	}
 
-- 
2.53.0