[PATCH v6 1/5] leds: trigger: netdev: Put netdev on activate error path

["A. Sverdlin" <alexander.sverdlin@siemens.com>]

From: Alexander Sverdlin <alexander.sverdlin@siemens.com>

When hw control is active, set_device_name() takes a reference on the
netdev via dev_get_by_name(). The register_netdevice_notifier() failure
path frees trigger_data without dropping it, leaking the netdev.

Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/20260914140045.B8F4C1F000FF@smtp.kernel.org/
Fixes: 0316cc5629d1 ("leds: trigger: netdev: init mode if hw control already active")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
---
Changelog:
v5:
- removed unset_device_name()
v3:
- introduced unset_device_name() as a counterpart of set_device_name()

 drivers/leds/trigger/ledtrig-netdev.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
index 5b0132484594c..cfaf130157b3d 100644
--- a/drivers/leds/trigger/ledtrig-netdev.c
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -776,8 +776,10 @@ static int netdev_trig_activate(struct led_classdev *led_cdev)
 	led_set_trigger_data(led_cdev, trigger_data);
 
 	rc = register_netdevice_notifier(&trigger_data->notifier);
-	if (rc)
+	if (rc) {
+		dev_put(trigger_data->net_dev);
 		kfree(trigger_data);
+	}
 
 	return rc;
 }
-- 
2.56.0