From: Udaya Kiran Challa <challauday369@gmail.com>
To: andrew@lunn.ch, gregory.clement@bootlin.com,
sebastian.hesselbarth@gmail.com, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, lee@kernel.org
Cc: skhan@linuxfoundation.org, me@brighamcampbell.com,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Udaya Kiran Challa <challauday369@gmail.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
kernel test robot <lkp@intel.com>
Subject: [PATCH v4 2/2] ARM: dts: kirkwood: Rename netxbig LED child nodes to led-*
Date: Tue, 27 Oct 2026 22:50:52 +0530 [thread overview]
Message-ID: <20261027172052.129283-1-challauday369@gmail.com> (raw)
Rename the LED child nodes in kirkwood-netxbig.dtsi and
kirkwood-net5big.dts from descriptive names (e.g. blue-power, red-sata0)
to generic led-* names to match the new YAML binding schema.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Fixes: 59cf91cf87ab ("dt-bindings: leds: lacie,netxbig-leds: Convert to DT schema")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202610270710.aWUm0pbv-lkp@intel.com/
Signed-off-by: Udaya Kiran Challa <challauday369@gmail.com>
---
arch/arm/boot/dts/marvell/kirkwood-net5big.dts | 14 +++++++-------
arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi | 14 +++++++-------
2 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/marvell/kirkwood-net5big.dts b/arch/arm/boot/dts/marvell/kirkwood-net5big.dts
index 2497ad26b5b6..49deeb40f4e2 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-net5big.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-net5big.dts
@@ -85,8 +85,8 @@ g762_clk: g762-oscillator {
};
};
- netxbig-leds {
- blue-sata2 {
+ leds {
+ led-0 {
label = "netxbig:blue:sata2";
mode-addr = <5>;
mode-val = <NETXBIG_LED_OFF 0
@@ -96,7 +96,7 @@ NETXBIG_LED_SATA 1
bright-addr = <2>;
max-brightness = <7>;
};
- red-sata2 {
+ led-1 {
label = "netxbig:red:sata2";
mode-addr = <5>;
mode-val = <NETXBIG_LED_OFF 0
@@ -105,7 +105,7 @@ NETXBIG_LED_ON 2
bright-addr = <2>;
max-brightness = <7>;
};
- blue-sata3 {
+ led-2 {
label = "netxbig:blue:sata3";
mode-addr = <6>;
mode-val = <NETXBIG_LED_OFF 0
@@ -115,7 +115,7 @@ NETXBIG_LED_SATA 1
bright-addr = <2>;
max-brightness = <7>;
};
- red-sata3 {
+ led-3 {
label = "netxbig:red:sata3";
mode-addr = <6>;
mode-val = <NETXBIG_LED_OFF 0
@@ -124,7 +124,7 @@ NETXBIG_LED_ON 2
bright-addr = <2>;
max-brightness = <7>;
};
- blue-sata4 {
+ led-4 {
label = "netxbig:blue:sata4";
mode-addr = <7>;
mode-val = <NETXBIG_LED_OFF 0
@@ -134,7 +134,7 @@ NETXBIG_LED_SATA 1
bright-addr = <2>;
max-brightness = <7>;
};
- red-sata4 {
+ led-5 {
label = "netxbig:red:sata4";
mode-addr = <7>;
mode-val = <NETXBIG_LED_OFF 0
diff --git a/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi
index d4edf2727388..23e8e8b4597d 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi
@@ -115,7 +115,7 @@ &gpio1 13 GPIO_ACTIVE_HIGH
enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
- netxbig-leds {
+ leds {
compatible = "lacie,netxbig-leds";
gpio-ext = <&netxbig_gpio_ext>;
@@ -123,7 +123,7 @@ netxbig-leds {
timers = <NETXBIG_LED_TIMER1 500 500
NETXBIG_LED_TIMER2 500 1000>;
- blue-power {
+ led-0 {
label = "netxbig:blue:power";
mode-addr = <0>;
mode-val = <NETXBIG_LED_OFF 0
@@ -133,7 +133,7 @@ NETXBIG_LED_TIMER1 3
bright-addr = <1>;
max-brightness = <7>;
};
- red-power {
+ led-1 {
label = "netxbig:red:power";
mode-addr = <0>;
mode-val = <NETXBIG_LED_OFF 0
@@ -142,7 +142,7 @@ NETXBIG_LED_ON 2
bright-addr = <1>;
max-brightness = <7>;
};
- blue-sata0 {
+ led-2 {
label = "netxbig:blue:sata0";
mode-addr = <3>;
mode-val = <NETXBIG_LED_OFF 0
@@ -152,7 +152,7 @@ NETXBIG_LED_SATA 1
bright-addr = <2>;
max-brightness = <7>;
};
- red-sata0 {
+ led-3 {
label = "netxbig:red:sata0";
mode-addr = <3>;
mode-val = <NETXBIG_LED_OFF 0
@@ -161,7 +161,7 @@ NETXBIG_LED_ON 2
bright-addr = <2>;
max-brightness = <7>;
};
- blue-sata1 {
+ led-4 {
label = "netxbig:blue:sata1";
mode-addr = <4>;
mode-val = <NETXBIG_LED_OFF 0
@@ -171,7 +171,7 @@ NETXBIG_LED_SATA 1
bright-addr = <2>;
max-brightness = <7>;
};
- red-sata1 {
+ led-5 {
label = "netxbig:red:sata1";
mode-addr = <4>;
mode-val = <NETXBIG_LED_OFF 0
--
2.34.1
next reply other threads:[~2026-10-27 17:21 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-27 17:20 Udaya Kiran Challa [this message]
-- strict thread matches above, loose matches on Subject: below --
2026-10-05 18:47 Udaya Kiran Challa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261027172052.129283-1-challauday369@gmail.com \
--to=challauday369@gmail.com \
--cc=andrew@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lkp@intel.com \
--cc=me@brighamcampbell.com \
--cc=robh@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®