mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Linkui Xiao <xiaolinkui@126.com>
To: anthony.l.nguyen@intel.com, przemyslaw.kitszel@intel.com,
	andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@kernel.org,
	kuba@kernel.org, pabeni@redhat.com
Cc: intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, Linkui Xiao <xiaolinkui@kylinos.cn>,
	stable@vger.kernel.org
Subject: [PATCH net 2/5] e1000e: do not cache the hwtstamp config before it is applied
Date: Wed, 28 Oct 2026 17:04:55 +0800	[thread overview]
Message-ID: <20261028090455.2291659-1-xiaolinkui@126.com> (raw)

From: Linkui Xiao <xiaolinkui@kylinos.cn>

e1000e_config_hwtstamp() stores the requested configuration in
adapter->hwtstamp_config right after the rx filter has been
translated, but the two register writes that follow are verified by
reading the registers back and each of them can fail with -EAGAIN.

When one of them does, the driver is left holding a configuration the
hardware never accepted:

 - e1000e_hwtstamp_get() hands it back to user space, so an
   application that reads the configuration back is told that
   hardware time stamping is in effect while it is not;

 - e1000e_systim_reset() re-applies it after every reset, including
   the ones the watchdog triggers, and keeps failing;

 - e1000_watchdog() starts polling TSYNCRXCTL_VALID for the cached rx
   filter, and e1000_xmit_frame() still parks skbs that ask for a Tx
   time stamp because it only looks at FLAG_HAS_HW_TIMESTAMP, so they
   are eventually dropped by e1000e_tx_hwtstamp_work() with a
   "clearing Tx timestamp hang" warning.

Cache the configuration only once both registers have been verified,
so that adapter->hwtstamp_config always describes what the hardware
is programmed with.

Fixes: 62d7e3a2d006 ("e1000e: Validate hwtstamp_config completely before applying it")
Cc: stable@vger.kernel.org
Signed-off-by: Linkui Xiao <xiaolinkui@kylinos.cn>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 35f5590228eb..7ae33273734f 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3715,8 +3715,6 @@ static int e1000e_config_hwtstamp(struct e1000_adapter *adapter,
 		return -ERANGE;
 	}
 
-	adapter->hwtstamp_config = *config;
-
 	/* enable/disable Tx h/w time stamping */
 	regval = er32(TSYNCTXCTL);
 	regval &= ~E1000_TSYNCTXCTL_ENABLED;
@@ -3763,6 +3761,8 @@ static int e1000e_config_hwtstamp(struct e1000_adapter *adapter,
 	er32(RXSTMPH);
 	er32(TXSTMPH);
 
+	adapter->hwtstamp_config = *config;
+
 	return 0;
 }
 
-- 
2.25.1


             reply	other threads:[~2026-10-28  9:05 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-28  9:04 Linkui Xiao [this message]
2026-10-28 18:32 ` Loktionov, Aleksandr
2026-10-28 22:12 ` Vadim Fedorenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261028090455.2291659-1-xiaolinkui@126.com \
    --to=xiaolinkui@126.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=anthony.l.nguyen@intel.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=przemyslaw.kitszel@intel.com \
    --cc=stable@vger.kernel.org \
    --cc=xiaolinkui@kylinos.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®