From: Lefteris Koutrakis <lefteris.koutrakis@gmail.com>
To: linuxppc-dev@lists.ozlabs.org, devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, maddy@linux.ibm.com,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
mpe@ellerman.id.au, npiggin@gmail.com, chleroy@kernel.org,
ritesh.list@gmail.com, sshegde@linux.ibm.com,
Lefteris Koutrakis <lefteris.koutrakis@gmail.com>
Subject: [PATCH] powerpc/dts: Add dts for WatchGuard Firebox T30
Date: Wed, 28 Oct 2026 06:21:58 -0400 [thread overview]
Message-ID: <20261028102158.71032-1-lefteris.koutrakis@gmail.com> (raw)
Add device tree support for the WatchGuard Firebox T30 and T30-W.
These devices are security appliances based on the Freescale P1020 SoC. They feature 5x Gigabit Ethernet ports, USB, and a serial console.
Signed-off-by: Lefteris Koutrakis <lefteris.koutrakis@gmail.com>
---
arch/powerpc/boot/dts/fsl/Makefile | 1 +
arch/powerpc/boot/dts/fsl/firebox-t30.dts | 413 ++++++++++++++++++++++
2 files changed, 414 insertions(+)
create mode 100644 arch/powerpc/boot/dts/fsl/firebox-t30.dts
diff --git a/arch/powerpc/boot/dts/fsl/Makefile b/arch/powerpc/boot/dts/fsl/Makefile
index d2cc8e1f0..ebbf301e1 100644
--- a/arch/powerpc/boot/dts/fsl/Makefile
+++ b/arch/powerpc/boot/dts/fsl/Makefile
@@ -3,6 +3,7 @@
dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts))
# MPC85xx platforms
+dtb-$(CONFIG_MPC85xx_RDB) += firebox-t30.dtb
dtb-$(CONFIG_BSC9131_RDB) += bsc9131rdb.dtb
dtb-$(CONFIG_BSC9132_QDS) += bsc9132qds.dtb
dtb-$(CONFIG_C293_PCIE) += c293pcie.dtb
diff --git a/arch/powerpc/boot/dts/fsl/firebox-t30.dts b/arch/powerpc/boot/dts/fsl/firebox-t30.dts
new file mode 100644
index 000000000..546e98938
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/firebox-t30.dts
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/include/ "fsl/p1020si-pre.dtsi"
+
+/ {
+ model = "Watchguard Firebox T30";
+ compatible = "watchguard,firebox-t30";
+
+ chosen {
+ bootargs-override = "console=ttyS0,115200 rw root=/dev/mmcblk0p2 rootfstype=squashfs rootwait";
+ };
+
+ aliases {
+ label-mac-device = &enet0;
+ led-boot = &led0;
+ led-failsafe = &led1;
+ led-running = &led0;
+ led-upgrade = &led1;
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ cpus {
+ /delete-property/ PowerPC,P1020@1;
+ };
+
+ lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
+ ranges = <0x0 0x0 0x0 0xefc00000 0x400000>;
+
+ nor@0 {
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x400000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x20000>;
+ label = "nor-cfg0";
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_nor_cfg0_1830: mac-address@1830 {
+ compatible = "mac-base";
+ reg = <0x1830 0x11>;
+ #nvmem-cell-cells = <1>;
+ };
+
+ macaddr_nor_cfg0_1844: mac-address@1844 {
+ compatible = "mac-base";
+ reg = <0x1844 0x11>;
+ #nvmem-cell-cells = <1>;
+ };
+
+ macaddr_nor_cfg0_1858: mac-address@1858 {
+ compatible = "mac-base";
+ reg = <0x1858 0x11>;
+ #nvmem-cell-cells = <1>;
+ };
+
+ macaddr_nor_cfg0_186c: mac-address@186c {
+ compatible = "mac-base";
+ reg = <0x186c 0x11>;
+ #nvmem-cell-cells = <1>;
+ };
+
+ macaddr_nor_cfg0_1880: mac-address@1880 {
+ compatible = "mac-base";
+ reg = <0x1880 0x11>;
+ #nvmem-cell-cells = <1>;
+ };
+
+ macaddr_nor_cfg0_1894: mac-address@1894 {
+ compatible = "mac-base";
+ reg = <0x1894 0x11>;
+ #nvmem-cell-cells = <1>;
+ };
+ };
+ };
+
+ partition@20000 {
+ reg = <0x20000 0x10000>;
+ label = "nor-cfg1";
+ };
+
+ partition@30000 {
+ reg = <0x30000 0x20000>;
+ label = "nor-mfg";
+ };
+
+ partition@50000 {
+ reg = <0x50000 0xc0000>;
+ label = "nor-bootopt";
+ };
+
+ partition@110000 {
+ reg = <0x110000 0xc0000>;
+ label = "nor-extra1";
+ };
+
+ partition@1d0000 {
+ reg = <0x1d0000 0xc0000>;
+ label = "nor-extra2";
+ };
+
+ partition@290000 {
+ reg = <0x290000 0xe0000>;
+ label = "nor-backup";
+ };
+
+ partition@370000 {
+ reg = <0x370000 0x10000>;
+ label = "nor-ubootenv";
+ };
+
+ partition@380000 {
+ reg = <0x380000 0x80000>;
+ label = "nor-uboot";
+ };
+ };
+ };
+ };
+
+ soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+
+ i2c@3000 {
+ rtc@30 {
+ compatible = "sii,s35390a";
+ reg = <0x30>;
+ };
+ };
+
+ i2c@3100 {
+ tpm@29 {
+ compatible = "tpm,tpm_i2c_atmel";
+ reg = <0x29>;
+ };
+ };
+
+ sdhc@2e000 {
+ compatible = "fsl,p1020-esdhc", "fsl,esdhc";
+ sdhci,auto-cmd12;
+ reg = <0x2e000 0x1000>;
+ interrupts = <0x48 0x2 0x0 0x0>;
+ interrupt-parent = <&mpic>;
+ fsl,sdhci-dma-broken;
+ fsl,sdhci-ahb2mag-irq-bypass;
+ fsl,sdhci-adjust-timeout;
+ clock-frequency = <0>;
+ };
+
+ spi0: spi@7000 {
+ compatible = "fsl,mpc8536-espi";
+ reg = <0x7000 0x1000>;
+ interrupts = <0x3b 0x2>;
+ interrupt-parent = <&mpic>;
+ fsl,espi-num-chipselects = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
+ compatible = "everspin,mr25h256", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x8000>;
+ label = "spi_mtd_0";
+ };
+ };
+ };
+
+ slic@1 {
+ compatible = "zarlink,le88266";
+ reg = <1>;
+ spi-max-frequency = <500000>;
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ dr_mode = "host";
+ };
+
+ mdio@24000 {
+ switch0: switch@10 {
+ compatible = "marvell,mv88e6085";
+ reg = <0x10>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ switch0phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ switch0phy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ switch0phy3: ethernet-phy@3 {
+ reg = <3>;
+ };
+
+ switch0phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "wan";
+ phy-handle = <&switch0phy0>;
+ nvmem-cells = <&macaddr_nor_cfg0_1830 0>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ phy-handle = <&switch0phy1>;
+ nvmem-cells = <&macaddr_nor_cfg0_1844 0>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ phy-handle = <&switch0phy2>;
+ nvmem-cells = <&macaddr_nor_cfg0_1858 0>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ phy-handle = <&switch0phy3>;
+ nvmem-cells = <&macaddr_nor_cfg0_186c 0>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan4";
+ phy-handle = <&switch0phy4>;
+ nvmem-cells = <&macaddr_nor_cfg0_1880 0>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&enet0>;
+ phy-mode = "rgmii-id";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+
+ mdio@25000 {
+ status = "disabled";
+ };
+
+ mdio@26000 {
+ status = "disabled";
+ };
+
+ enet0: ethernet@b0000 {
+ phy-connection-type = "rgmii-id";
+ rx-internal-delay-ps = <2000>;
+ tx-internal-delay-ps = <2000>;
+ nvmem-cells = <&macaddr_nor_cfg0_1830 0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ enet1: ethernet@b1000 {
+ status = "disabled";
+ };
+
+ enet2: ethernet@b2000 {
+ status = "disabled";
+ };
+
+ gpio0: gpio-controller@fc00 {
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0: led-0 {
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_ORANGE>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led1: led-1 {
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led2: led-2 {
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_USB;
+ };
+
+ led3: led-3 {
+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WLAN_5GHZ;
+ default-state = "keep";
+ };
+
+ led4: led-4 {
+ gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_ORANGE>;
+ function = LED_FUNCTION_WLAN_2GHZ;
+ default-state = "keep";
+ };
+
+ led5: led-5 {
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_POWER;
+ default-state = "on";
+ };
+ };
+
+ pci0: pcie@ffe09000 {
+ reg = <0 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+ status = "disabled";
+
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+
+ pcie@0 {
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+
+ ath10k: wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ nvmem-cells = <&macaddr_nor_cfg0_1894 0>;
+ nvmem-cell-names = "mac-address";
+ };
+ };
+ };
+};
+
+/include/ "fsl/p1020si-post.dtsi"
--
2.51.0
reply other threads:[~2026-10-28 10:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261028102158.71032-1-lefteris.koutrakis@gmail.com \
--to=lefteris.koutrakis@gmail.com \
--cc=chleroy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=maddy@linux.ibm.com \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
--cc=ritesh.list@gmail.com \
--cc=robh@kernel.org \
--cc=sshegde@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®