mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Vlad Poenaru <vlad.wing@gmail.com>
To: netdev-bot+sashiko@kernel.org, netdev@vger.kernel.org
Cc: Michael Chan <michael.chan@broadcom.com>,
	Pavan Chebbi <pavan.chebbi@broadcom.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@kernel.org>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Simon Horman <horms@kernel.org>,
	Andy Gospodarek <andrew.gospodarek@broadcom.com>,
	Thomas Gleixner <tglx@kernel.org>, Marc Zyngier <maz@kernel.org>,
	Jinqian Yang <yangjinqian1@huawei.com>,
	Andrew Preece <apreece@meta.com>,
	regressions@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH net] bnxt_en: Don't keep MSI-X vectors added before FW reserves them
Date: Wed, 28 Oct 2026 04:48:33 -0700	[thread overview]
Message-ID: <20261028114833.239086-1-vlad.wing@gmail.com> (raw)
In-Reply-To: <179310474137.3134.4690740150964769309@kernel.org>

On Tue, Oct 27, 2026 at 12:39:01PM +0000, netdev-bot+sashiko@kernel.org wrote:
> - [Medium] The fix is incomplete when FW grants fewer MSI-X vectors than
>   requested.

Agreed. bnxt_reserve_rings() grows to the irqs_required it computed
before the reservation, so a partial grant would still activate
entries that FW has not reserved. In v2 the allocation is sized from
bnxt_get_num_msix() after __bnxt_reserve_rings(), i.e. from the rings
actually kept. With no RoCE driver registered, that fits within what
FW granted, and it is never more than the old pre-reservation count.
With RoCE registered, __bnxt_reserve_rings() can still keep more L2
rings than a partial grant covers, because the ULP share isn't taken
out of resv_irqs. That accounting predates this patch and belongs with
the ring accounting work on net-next, so I've left it out of this fix.

> - [Medium] New error path leaves the state inconsistent.

Agreed. This path existed before for the bnxt_reserve_rings() grow,
but the patch makes it the main one. In v2, bnxt_reserve_rings() also
grows the vectors when no reservation is needed but bp->total_irqs is
below what the reserved rings need, so the next open recovers instead
of returning early. bnxt_change_msix() also clears irq_tbl[].vector
when it trims, so a stale virq can't be requested again.

> Pre-existing issues:
> - [High] This problem wasn't introduced by this patch, but the DCB IEEE
>   ETS path reaches bnxt_check_rings() and bnxt_change_msix() holding...

This race between the DCB path (RTNL only) and PCI error recovery
(netdev lock only) is real as far as I can tell. It predates this
patch, and the grow loop already has it. I'll leave the locking in
bnxt_dcbnl_ieee_setets() to Michael and Pavan rather than mix it into
this regression fix.

v2 follows.

pw-bot: cr

      reply	other threads:[~2026-10-28 11:48 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-23 12:13 Vlad Poenaru
2026-10-27 12:39 ` netdev-bot+sashiko
2026-10-28 11:48   ` Vlad Poenaru [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261028114833.239086-1-vlad.wing@gmail.com \
    --to=vlad.wing@gmail.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=andrew.gospodarek@broadcom.com \
    --cc=apreece@meta.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=horms@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=michael.chan@broadcom.com \
    --cc=netdev-bot+sashiko@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=pavan.chebbi@broadcom.com \
    --cc=regressions@lists.linux.dev \
    --cc=tglx@kernel.org \
    --cc=yangjinqian1@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®